Rear window regulator PEUGEOT 307 CC (3B)

Installing the cables on the rear window regulator of a Peugeot 307 CC (3B) is known to be tricky mainly because the cables must be tensioned and routed perfectly within the plastic reel and the regulator mechanism. Here are some tips to help with your installation:

- The regulator and glass need to be aligned carefully. The glass should be positioned so that you can fit the regulator arms and cables into place without forcing.
- Before final assembly, loosely fit the cables into the plastic reel and check that they can move smoothly with the motor's action.
- The cable routing often involves looping the cables around specific guide points on the regulator and ensuring they are not twisted or overlapped.
- Use tape or temporary clamps to hold the cables and glass in place during the installation of the regulator bolts to prevent slipping.
- When placing the glass onto the metal studs or strips on the regulator arm, taping the metal strip to glass prevents it from moving out of place.
- The order of assembly is important — typically you install the regulator and the glass together, then fit the cables onto the reel.
- Adjustments can be made by loosening certain bolts slightly to reposition the glass and cables to prevent jamming.
- Watch careful tutorial videos specific to the Peugeot 307 CC rear window regulator replacement. These show the subtle techniques to handle the cables and glass safely.

Your difficulty is common; patience and careful alignment are key. If questions remain, a detailed step-by-step video for the exact model may be the best way to overcome the challenge by visualizing the whole process live.