
Disclaimer
How to change wheel cylinder on VW 411/412 Hatchback (4) – replacement guide
downloads:
0
Views:
5

Recommended replacement interval for the part category Wheel Brake Cylinder : 60000 km
Important!
This replacement procedure can be used for:
VW 411,412 1.7, VW 411,412 1.7 … View more
The steps may slightly vary depending on the car design.
VW 411,412 1.7, VW 411,412 1.7 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Wheel Cylinder for 411,412 and other VW models
Wheel Brake Cylinder
Alternative products

Wire brush
WD-40 spray
Copper grease
Combination spanner #7
Combination spanner #11
Torx bit T30
Wheel impact socket #17
Ratchet wrench
Torque wrench
Flat Screwdriver
Phillips screwdriver
Wheel chock
Replacement: wheel cylinder – VW 411,412. Tip from AUTODOC:
- Replace the wheel brake cylinders of the rear drum brakes in pairs.
- The replacement procedure is identical for the right and left wheel brake cylinders of the rear drum brakes.
- All work should be done with the engine stopped.
Replacement: wheel cylinder – VW 411,412. Recommended sequence of steps:
- Step 1Secure the wheels with chocks.
- Step 2Loosen the wheel mounting bolts. Use wheel impact socket #17.
- Step 3Raise the rear of the car and secure on supports.Step 4Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. VW 411,412
- Step 5Remove the wheel.
- Step 6Clean the brake drum fasteners. Use a wire brush. Use WD-40 spray.Step 7Unscrew the brake drum fastening. Use a Phillips screwdriver.
- Step 8Remove the brake drum.Replacement: wheel cylinder – VW 411,412. Tip from AUTODOC experts:Examine the brake drum. Replace it if necessary.
- Step 9Disconnect the hydraulic line from the wheel cylinder back. Use a combination spanner #11.Replacement: wheel cylinder – VW 411,412. Tip from AUTODOC:Immediately plug the brake line open end to prevent fluid leakage and ingress of dirt into the hydraulic system.
- Step 10Unscrew the brake cylinder fastening bolt. Use Torx T30. Use a ratchet wrench.
- Step 11Remove the brake cylinder from the backplate. Use a flat screwdriver.
- Step 12Clean the brake drum. Use a wire brush. Use WD-40 spray.Step 13Clean the brake pipe attachment spot and the brake drum fastening bolts on :maker :model.Step 14Install a new brake cylinder.
- Step 15Screw the brake cylinder fastening bolts. Use Torx T30. Use a torque wrench. Tighten it to 8 nm torque.
- Step 16Connect the hydraulic line to the wheel cylinder back. Use a combination spanner #11. Use a torque wrench. Tighten it to 14 nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VW 411/412 Hatchback (4) model
Popular maintenance tutorials for VW 411,412
Complete guides for changing the Brake wheel cylinder on different VW 411/412 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VW 411,412
View more
- DIY vehicle AC compressor restoration
- Prevent Engine Damage: How to Identify Rocker Cover Gasket Issues and Proper Replacement | AUTODOC
- 5 Ways You’re Scrubbing Your Car Wrong | AUTODOC Tips
- Top 4 Car Cleaning Products to Protect Your Car's Body | AUTODOC Tips
Most commonly replaced car parts on VW 411/412
Time to replace parts? Get even better deals in our Shop app.

SCAN ME