Important!
This replacement procedure can be used for:
SEAT Exeo ST (3R5) 2.0 TFSI, SEAT Exeo ST (3R5) 1.8 TSI, SEAT Exeo ST (3R5) 1.8 TSI, SEAT Exeo ST (3R5) 2.0 TDI, SEAT Exeo ST (3R5) 2.0 TDI, SEAT Exeo ST (3R5) 2.0 TDI, SEAT Exeo ST (3R5) 2.0 TFSI, SEAT Exeo ST (3R5) 1.8 T, SEAT Exeo ST (3R5) 1.6 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Track Rod End for Exeo ST (3R5) and other SEAT models
Tools
Replacement: track rod end – SEAT EXEO ST (3R5). Tools you might need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #19
Combination spanner #22
Drive socket # 13
Drive socket # 16
Wheel impact socket #17
Ratchet wrench
Torque wrench
Vernier caliper
Flat chisel
Hammer
Wheel chock
Replacement: track rod end – SEAT EXEO ST (3R5). AUTODOC recommends:
  • Replace tie rod ends in pairs.
  • The replacement procedure is identical for the right and left tie rod ends.
  • Please note: all work on the car – SEAT EXEO ST (3R5) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    How to change Track Rod End on Seat Exeo st 2009 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
    Step 3
    Raise the front of the car and secure on supports.
    Step 4
    How to replace SEAT Exeo ST (3R5) 2.0 TDI 2010 Track Rod End - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. SEAT EXEO ST (3R5)
  3. Step 5
    Seat Exeo st 1.8 TSI 2011 Track Rod End replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush. Use WD-40 spray.
    Step 7
    Changing Track Rod End on SEAT Exeo ST (3R5) 2.0 TFSI 2012 by yourself
    Loosen the tie rod end fastening bolt. Use a drive socket #13. Use a ratchet wrench.
  5. Step 8
    How to remove SEAT EXEO 1.6 2013 Track Rod End - online easy-to-follow instructions
    Unscrew the end fastening nut to the steering knuckle. Use a drive socket #16. Use a ratchet wrench.
  6. Step 9
    How to replace Track Rod End on SEAT Exeo ST (3R5) 2014: download PDF manuals and video instructions
    Remove the fastening bolt. Use a flat metal-working chisel. Use a hammer.
  7. Step 10
    How hard is it to do yourself: Track Rod End replacement on Seat Exeo st 1.8 TSI 2015 - download illustrated guide
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper.
  8. Step 11
    Need to know how to renew Track Rod End on SEAT EXEO 2016? This free workshop manual will help you to do it yourself
    Loosen the lock nut securing the tie rod end to the tie rod. Use a combination spanner #19. Use a combination spanner #22.
  9. Step 12
    Changing of Track Rod End on Seat Exeo st 2017 won't be an issue if you follow this illustrated step-by-step guide
    Disconnect the tie rod end from the steering knuckle. Use a flat metal-working chisel. Use a hammer.
  10. Step 13
    SEAT EXEO 2.0 TFSI Track Rod End replacement: online guides and video tutorials
    Screw the end out of the tie rod.
  11. Step 14
    Replacing Track Rod End on Seat Exeo st 2019 2.0 TDI by yourself
    Clean the mounting seats of the tie rod end. Use a wire brush. Use WD-40 spray.
  12. Step 15
    Exeo ST (3R5) 1.6 2020 Track Rod End DIY replacement workshop manual
    Screw on a new tie rod end.
    Replacement: track rod end – SEAT EXEO ST (3R5). Professionals recommend:
    While installing the steering rod end remember to make the same number of turns or to leave the same length of thread showing as per your measurements.
  13. Step 16
    How to change Track Rod End on SEAT Exeo ST (3R5) 2021 - tips and tricks
    Connect the tie rod end to the steering knuckle. Use a hammer.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the SEAT Exeo ST (3R5) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
SEAT Exeo ST (3R5) Track Rod End replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY SEAT Exeo ST (3R5) Track Rod End replacement - online guide
Tips & tricks for your SEAT Exeo ST (3R5)
View more
  • How to change Tie rod end on SEAT Exeo ST (3R5) 1.8 T - replacement tricks
    Things you should never do with an automatic transmission | AUTODOC tips
  • Changing Outer tie rod Seat Exeo st 2.0 TDI - Replacement Tips
    4 reasons why your CHECK ENGINE light is on | AUTODOC tips
  • Maintenance Hacks - SEAT Exeo ST (3R5) 1.8 TSI Track rod end ball joint replacement guide
    The most common problems when buying a used car | AUTODOC
  • Replace Outer tie rod end on Seat Exeo st - free video tips
    How to detect vacuum leaks using a smoke machine | AUTODOC