Important!
This replacement procedure can be used for:
NISSAN INTERSTAR Box (X70) dCi 80, NISSAN INTERSTAR Box (X70) dCI 90, NISSAN INTERSTAR Box (X70) dCi 115, NISSAN INTERSTAR Box (X70) dCi 140, NISSAN INTERSTAR Box (X70) dCi 100, NISSAN INTERSTAR Box (X70) dCi 120, NISSAN INTERSTAR Box (X70) dCi 150, NISSAN INTERSTAR Box (X70) dCi 100 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Track Rod End for INTERSTAR Box (X70) and other NISSAN models
Alternative products
How to change Track rod end on Nissan Interstar Van dCi 120 – step-by-step instructions for straightforward car repair Track rod end
Tools
Replacement: track rod end – NISSAN INTERSTAR Box (X70). Tools you might need:
Wire brush
WD-40 spray
All-purpose cleaning spray
Ceramic grease
Torque wrench
15 mm combination spanner
13 mm socket
22 mm socket
24 mm wheel impact socket
Ratchet wrench or power tool for removal/installation of threaded fasteners
Tommy bar
Vernier caliper
Ball joint separator
Car lift or jack with jack stands, and wheel chocks
Replacement: track rod end – NISSAN INTERSTAR Box (X70). Professionals recommend:
  • Replace the tie rod ends in pairs.
  • The replacement procedure is identical for the left and right tie rod ends.
  • All the work should be carried out with the engine switched off.
Replacement: track rod end – NISSAN INTERSTAR Box (X70). Recommended sequence of steps:
  1. Step 1
    How to change Track Rod End on Nissan Interstar Van 2002 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace NISSAN INTERSTAR Box (X70) dCi 120 2003 Track Rod End - step-by-step manuals and video guides
    Loosen the wheel fasteners. Use a 24 mm wheel impact socket. Use a tommy bar.
  3. Step 3
    Raise the car.
    Replacement: track rod end – NISSAN INTERSTAR Box (X70). AUTODOC recommends:
    If you are using a jack, make sure the car is parked on a hard, flat surface.Make sure to additionally secure the car with jack stands.
    Step 4
    Nissan Interstar Van dCi 115 2004 Track Rod End replacement: free workshop manuals
    Unscrew the wheel fasteners.
    Caution!
    To avoid injury, hold up the wheel when unscrewing the fasteners.
  4. Step 5
    Changing Track Rod End on NISSAN INTERSTAR Box (X70) 3.0 dCi 140 2005 by yourself
    Remove the wheel.
  5. Step 6
    How to remove NISSAN INTERSTAR 2.5 dCi 100 2006 Track Rod End - online easy-to-follow instructions
    Clean all tie rod end connections. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Track Rod End on NISSAN INTERSTAR Box (X70) 2007: download PDF manuals and video instructions
    Unscrew the nut connecting the tie rod end to the steering knuckle. Use a 22 mm socket. Use a ratchet wrench.
  7. Step 8
    How hard is it to do yourself: Track Rod End replacement on Nissan Interstar Van dCi 150 2008 - download illustrated guide
    Loosen the bolt connecting the tie rod end to the tie rod. Use an 13 mm socket. Use a ratchet wrench.
  8. Step 9
    Need to know how to renew Track Rod End on NISSAN INTERSTAR 2009? This free workshop manual will help you to do it yourself
    Measure and note down the length of the exposed portion of the tie rod thread or the number of turns the tie rod end made when being unscrewed to prevent wheel misalignment during reassembly. Use a vernier caliper.
  9. Step 10
    Changing of Track Rod End on Nissan Interstar Van 2010 won't be an issue if you follow this illustrated step-by-step guide
    Disconnect the tie rod end from the steering knuckle. Use a ball joint separator.
  10. Step 11
    NISSAN INTERSTAR dCi 120 Track Rod End replacement: online guides and video tutorials
    Unscrew the tie rod end from the tie rod.
  11. Step 12
    Replacing Track Rod End on Nissan Interstar Van 2012 dCi 120 by yourself
    Clean the mounting seats of the tie rod end. Use a wire brush. Use an all-purpose cleaning spray.
  12. Step 13
    INTERSTAR Box (X70) 2.5 dCi 100 2013 Track Rod End DIY replacement workshop manual
    Screw on a new tie rod end.
    Replacement: track rod end – NISSAN INTERSTAR Box (X70). Tip from AUTODOC experts:
    When installing the tie rod end, remember to maintain the same length of the exposed tie rod thread or turn the tie rod end the same number of times.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the NISSAN Interstar Van (X70) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY NISSAN INTERSTAR Box (X70) Track Rod End replacement - online guide
Tips & tricks for your NISSAN INTERSTAR Box (X70)
View more
  • How to change Tie rod end on NISSAN INTERSTAR Box (X70) dCi 100 - replacement tricks
    #DIY guide: Changing your car's color with a spray can | AUTODOC tips
  • Changing Outer tie rod Nissan Interstar Van dCi 120 - Replacement Tips
    5 Essential Tips for beginner drivers: Avoid Common Mistakes
  • Maintenance Hacks - NISSAN INTERSTAR Box (X70) dCi 115 Track rod end ball joint replacement guide
    Top Automatic Transmission Blunders You Must Dodge | AUTODOC Insights
  • Replace Outer tie rod end on Nissan Interstar Van - free video tips
    DIY rear axle restoration | Drivetrain restoration – Part 2
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
NISSAN INTERSTAR Box (X70) Track Rod End replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME