Important!
This replacement procedure can be used for:
NISSAN INTERSTAR Platform/Chassis dCi 140, NISSAN INTERSTAR Platform/Chassis dCi 150, NISSAN INTERSTAR Platform/Chassis dCi 120, NISSAN INTERSTAR Platform/Chassis dCi 115, NISSAN INTERSTAR Platform/Chassis dCi 100 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Track Rod End for INTERSTAR Platform/Chassis and other NISSAN models
Alternative products
How to change Track rod end on Interstar dCi 120 – step-by-step instructions for straightforward car repair Track rod end
Tools
Replacement: track rod end – NISSAN INTERSTAR Platform/Chassis. Tools you might need:
Wire brush
WD-40 spray
All-purpose cleaning spray
Ceramic grease
Torque wrench
15 mm combination spanner
13 mm socket
22 mm socket
24 mm wheel impact socket
Ratchet wrench or power tool for removal/installation of threaded fasteners
Tommy bar
Vernier caliper
Ball joint separator
Car lift or jack with jack stands, and wheel chocks
Replacement: track rod end – NISSAN INTERSTAR Platform/Chassis. Professionals recommend:
  • Replace the tie rod ends in pairs.
  • The replacement procedure is identical for the left and right tie rod ends.
  • All the work should be carried out with the engine switched off.
Replacement: track rod end – NISSAN INTERSTAR Platform/Chassis. Recommended sequence of steps:
  1. Step 1
    How to change Track Rod End on Interstar 2003 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace NISSAN INTERSTAR Platform/Chassis dCi 120 2004 Track Rod End - step-by-step manuals and video guides
    Loosen the wheel fasteners. Use a 24 mm wheel impact socket. Use a tommy bar.
  3. Step 3
    Raise the car.
    Replacement: track rod end – NISSAN INTERSTAR Platform/Chassis. AUTODOC recommends:
    If you are using a jack, make sure the car is parked on a hard, flat surface.Make sure to additionally secure the car with jack stands.
    Step 4
    Interstar dCi 150 2005 Track Rod End replacement: free workshop manuals
    Unscrew the wheel fasteners.
    Caution!
    To avoid injury, hold up the wheel when unscrewing the fasteners.
  4. Step 5
    Changing Track Rod End on NISSAN INTERSTAR Platform/Chassis 2.5 dCi 100 2006 by yourself
    Remove the wheel.
  5. Step 6
    How to remove NISSAN INTERSTAR 3.0 dCi 140 2007 Track Rod End - online easy-to-follow instructions
    Clean all tie rod end connections. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Track Rod End on NISSAN INTERSTAR Platform/Chassis 2008: download PDF manuals and video instructions
    Unscrew the nut connecting the tie rod end to the steering knuckle. Use a 22 mm socket. Use a ratchet wrench.
  7. Step 8
    How hard is it to do yourself: Track Rod End replacement on Interstar dCi 150 2009 - download illustrated guide
    Loosen the bolt connecting the tie rod end to the tie rod. Use an 13 mm socket. Use a ratchet wrench.
  8. Step 9
    Need to know how to renew Track Rod End on NISSAN INTERSTAR 2010? This free workshop manual will help you to do it yourself
    Measure and note down the length of the exposed portion of the tie rod thread or the number of turns the tie rod end made when being unscrewed to prevent wheel misalignment during reassembly. Use a vernier caliper.
  9. Step 10
    Changing of Track Rod End on Interstar 2011 won't be an issue if you follow this illustrated step-by-step guide
    Disconnect the tie rod end from the steering knuckle. Use a ball joint separator.
  10. Step 11
    NISSAN INTERSTAR 2.5 dCi 100 Track Rod End replacement: online guides and video tutorials
    Unscrew the tie rod end from the tie rod.
  11. Step 12
    Replacing Track Rod End on Interstar 2013 dCi 120 by yourself
    Clean the mounting seats of the tie rod end. Use a wire brush. Use an all-purpose cleaning spray.
  12. Step 13
    INTERSTAR Platform/Chassis 3.0 dCi 140 2014 Track Rod End DIY replacement workshop manual
    Screw on a new tie rod end.
    Replacement: track rod end – NISSAN INTERSTAR Platform/Chassis. Tip from AUTODOC experts:
    When installing the tie rod end, remember to maintain the same length of the exposed tie rod thread or turn the tie rod end the same number of times.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the NISSAN Interstar Platform/Chassis model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY NISSAN INTERSTAR Platform/Chassis Track Rod End replacement - online guide
Tips & tricks for your NISSAN INTERSTAR Platform/Chassis
View more
  • How to change Tie rod end on NISSAN INTERSTAR Platform/Chassis dCi 115 - replacement tricks
    K2 ROTON wheel cleaner overview
  • Changing Outer tie rod Interstar dCi 120 - Replacement Tips
    #DIY Tips for Fixing Your Car's Air Conditioning Issues | Don't Wait for Costly Repairs!
  • Maintenance Hacks - NISSAN INTERSTAR Platform/Chassis dCi 150 Track rod end ball joint replacement guide
    Coolant comparison test | AUTODOC
  • Replace Outer tie rod end on Interstar - free video tips
    Prevent Engine Damage: How to Identify Rocker Cover Gasket Issues and Proper Replacement | AUTODOC
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
NISSAN INTERSTAR Platform/Chassis Track Rod End replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME