Important!
This replacement procedure can be used for:
MERCEDES-BENZ E-Class T-modell (S211) E 220 T CDI, MERCEDES-BENZ E-Class T-modell (S211) E 240 T (211.261), MERCEDES-BENZ E-Class T-modell (S211) E 320 T (211.265), MERCEDES-BENZ E-Class T-modell (S211) E 200 T Kompressor (211.242), MERCEDES-BENZ E-Class T-modell (S211) E 220 T CDI (211.206, 211.606), MERCEDES-BENZ E-Class T-modell (S211) E 270 T CDI (211.216), MERCEDES-BENZ E-Class T-modell (S211) E 320 T CDI (211.226), MERCEDES-BENZ E-Class T-modell (S211) E 55 T AMG Kompressor (211.276), MERCEDES-BENZ E-Class T-modell (S211) E 500 T (211.270), MERCEDES-BENZ E-Class T-modell (S211) E 280 T CDI (211.223), MERCEDES-BENZ E-Class T-modell (S211) E 320 T CDI (211.222), MERCEDES-BENZ E-Class T-modell (S211) E 280 T CDI (211.220), MERCEDES-BENZ E-Class T-modell (S211) E 280 T (211.254), MERCEDES-BENZ E-Class T-modell (S211) E 350 T (211.256), MERCEDES-BENZ E-Class T-modell (S211) E 220 T CDI (211.208), MERCEDES-BENZ E-Class T-modell (S211) E 200 Kompressor (211.241), MERCEDES-BENZ E-Class T-modell (S211) E 500 T (211.272), MERCEDES-BENZ E-Class T-modell (S211) E 63 AMG (211.277), MERCEDES-BENZ E-Class T-modell (S211) E 220 CDI (211.206), MERCEDES-BENZ E-Class T-modell (S211) E 200 CDI (211.207), MERCEDES-BENZ E-Class T-modell (S211) 350 CGI (211.257), MERCEDES-BENZ E-Class T-modell (S211) E 230 T (211.252), MERCEDES-BENZ E-Class T-modell (S211) E 270 T CDI (211.216), MERCEDES-BENZ E-Class T-modell (S211) E 320 T CDI (211.222) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Track Rod End for E-Class T-modell (S211) and other MERCEDES-BENZ models
Tools
Replacement: track rod end – MERCEDES-BENZ E-CLASS T-Model (S211). Tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Combination spanner #14
Combination spanner #21
Combination spanner #22
Drive socket # 21
Wheel impact socket #17
Tap wrench
Vernier caliper
Ball joint puller
Crow bar
Wheel chock
Replacement: track rod end – MERCEDES-BENZ E-CLASS T-Model (S211). Tip from AUTODOC:
  • Replace tie rod ends in pairs.
  • The replacement procedure is identical for the right and left tie rod ends.
  • All work should be done with the engine stopped.
Replacement: track rod end – MERCEDES-BENZ E-CLASS T-Model (S211). Take the following steps:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Track Rod End on Mercedes S211 2003 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  2. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    How to replace MERCEDES-BENZ E-Class T-modell (S211) E 220 CDI 2.2 (211.208) 2004 Track Rod End - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. MERCEDES-BENZ E-CLASS T-Model (S211)
  3. Step 5
    Mercedes S211 E 220 CDI 2.2 (211.206) 2005 Track Rod End replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing Track Rod End on MERCEDES-BENZ E-Class T-modell (S211) E 320 CDI 3.0 (211.222) 2006 by yourself
    Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush. Use WD-40 spray.
  5. Step 7
    How to remove MERCEDES-BENZ E-CLASS E 280 CDI 3.0 (211.220) 2007 Track Rod End - online easy-to-follow instructions
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper.
  6. Step 8
    How to replace Track Rod End on MERCEDES-BENZ E-Class T-modell (S211) 2008: download PDF manuals and video instructions
    Loosen the lock nut securing the tie rod end to the tie rod. Use a combination spanner #21 (2 pieces).
  7. Step 9
    How hard is it to do yourself: Track Rod End replacement on Mercedes S211 E 200 1.8 Kompressor (211.242) 2009 - download illustrated guide
    Unscrew the end fastening nut to the steering knuckle. Use a drive socket #21. Use a tap wrench.
  8. Step 10
    Need to know how to renew Track Rod End on MERCEDES-BENZ E-CLASS 2003? This free workshop manual will help you to do it yourself
    Disconnect the tie rod end from the steering knuckle. Use a ball joint puller. Use a crowbar.
  9. Step 11
    Changing of Track Rod End on Mercedes S211 2004 won't be an issue if you follow this illustrated step-by-step guide
    Screw the end out of the tie rod.
  10. Step 12
    MERCEDES-BENZ E-CLASS E 200 1.8 Kompressor (211.241) Track Rod End replacement: online guides and video tutorials
    Clean the mounting seats of the tie rod end. Use a wire brush. Use WD-40 spray.
  11. Step 13
    Replacing Track Rod End on Mercedes S211 2006 E 220 CDI 2.2 (211.208) by yourself
    Screw on a new tie rod end. Use a combination spanner #14.
    Replacement: track rod end – MERCEDES-BENZ E-CLASS T-Model (S211). Professionals recommend:
    While installing the steering rod end remember to make the same number of turns or to leave the same length of thread showing as per your measurements.
  12. Step 14
    E-Class T-modell (S211) E 280 CDI 3.0 (211.220) 2007 Track Rod End DIY replacement workshop manual
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper.
  13. Step 15
    How to change Track Rod End on MERCEDES-BENZ E-Class T-modell (S211) 2008 - tips and tricks
    Connect the tie rod end to the steering knuckle.
  14. Step 16
    Step-by-step recommendations for DIY replacement Mercedes S211 2009 E 280 CDI 3.0 (211.220) Track Rod End
    Screw on the fastening nut that connects the tie rod end to the steering knuckle. Use a combination spanner #22.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ E-Class T-modell (S211) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
MERCEDES-BENZ E-Class T-modell (S211) Track Rod End replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY MERCEDES-BENZ E-Class T-modell (S211) Track Rod End replacement - online guide
Tips & tricks for your MERCEDES-BENZ E-Class T-modell (S211)
View more
  • How to change Tie rod end on MERCEDES-BENZ E-Class T-modell (S211) E 320 CDI 3.2 (211.226) - replacement tricks
    DIY car soundproofing | AUTODOC tips
  • Changing Outer tie rod Mercedes S211 E 220 CDI 2.2 (211.208) - Replacement Tips
    5 car interior cleaning mistakes | AUTODOC tips
  • Maintenance Hacks - MERCEDES-BENZ E-Class T-modell (S211) E 220 CDI 2.2 (211.206) Track rod end ball joint replacement guide
    Coolant comparison test | AUTODOC
  • Replace Outer tie rod end on Mercedes S211 - free video tips
    3 things to know before buying summer tyres | AUTODOC tips