Important!
This replacement procedure can be used for:
MERCEDES-BENZ E-Class T-modell (S211) E 240 T (211.261), MERCEDES-BENZ E-Class T-modell (S211) E 320 T (211.265), MERCEDES-BENZ E-Class T-modell (S211) E 200 T Kompressor (211.242), MERCEDES-BENZ E-Class T-modell (S211) E 220 T CDI (211.206, 211.606), MERCEDES-BENZ E-Class T-modell (S211) E 270 T CDI (211.216), MERCEDES-BENZ E-Class T-modell (S211) E 320 T CDI (211.226), MERCEDES-BENZ E-Class T-modell (S211) E 240 T 4-matic (211.280), MERCEDES-BENZ E-Class T-modell (S211) E 320 T 4-matic (211.282), MERCEDES-BENZ E-Class T-modell (S211) E 500 T (211.270), MERCEDES-BENZ E-Class T-modell (S211) E 500 T 4-matic (211.283), MERCEDES-BENZ E-Class T-modell (S211) E 280 T CDI (211.223), MERCEDES-BENZ E-Class T-modell (S211) E 320 T CDI (211.222), MERCEDES-BENZ E-Class T-modell (S211) E 280 T CDI (211.220), MERCEDES-BENZ E-Class T-modell (S211) E 280 T (211.254), MERCEDES-BENZ E-Class T-modell (S211) E 350 T (211.256), MERCEDES-BENZ E-Class T-modell (S211) E 220 T CDI (211.208), MERCEDES-BENZ E-Class T-modell (S211) E 200 Kompressor (211.241), MERCEDES-BENZ E-Class T-modell (S211) E 500 T (211.272), MERCEDES-BENZ E-Class T-modell (S211) E 200 CDI (211.207), MERCEDES-BENZ E-Class T-modell (S211) 350 CGI (211.257), MERCEDES-BENZ E-Class T-modell (S211) E 230 T (211.252) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Strut Mount for E-Class T-modell (S211) and other MERCEDES-BENZ models
Tools
Replacement: strut mount – MERCEDES-BENZ E-CLASS T-Model (S211). Tools you might need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Drive socket # 13
Drive socket # 17
Drive socket # 21
Combination spanner #21
Wheel impact socket #17
Ratchet wrench
Torque wrench
Flat Screwdriver
Crow bar
Tap wrench
Hydraulic strut spring compressor
Hydraulic transmission jack
Fender cover
Wheel chock
Replacement: strut mount – MERCEDES-BENZ E-CLASS T-Model (S211). Professionals recommend:
  • The replacement procedure is identical for the mounts of the left and right shock struts of the front suspension.
  • All mounts of the front shock struts should be replaced simultaneously.
  • Please note: all work on the car – MERCEDES-BENZ E-CLASS T-Model (S211) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    How to change Strut Mount on Mercedes S211 2003 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace MERCEDES-BENZ E-Class T-modell (S211) E 220 CDI 2.2 (211.208) 2004 Strut Mount - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    Mercedes S211 E 220 CDI 2.2 (211.206) 2005 Strut Mount replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: strut mount – MERCEDES-BENZ E-CLASS T-Model (S211). AUTODOC recommends:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Strut Mount on MERCEDES-BENZ E-Class T-modell (S211) E 320 CDI 3.0 (211.222) 2006 by yourself
    Remove the wheel.
  5. Step 6
    How to remove MERCEDES-BENZ E-CLASS E 280 CDI 3.0 (211.220) 2007 Strut Mount - online easy-to-follow instructions
    Clean the fastening bolt that connects the shock absorber fork with the lower control arm. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Strut Mount on MERCEDES-BENZ E-Class T-modell (S211) 2008: download PDF manuals and video instructions
    Unscrew the fastening bolt that connects the shock absorber fork with the lower control arm. Use a combination spanner #21. Use a drive socket #21. Use a tap wrench.
  7. Step 8
    Remove the fastening bolt.
    Step 9
    How hard is it to do yourself: Strut Mount replacement on Mercedes S211 E 200 1.8 Kompressor (211.242) 2009 - download illustrated guide
    Detach the bottom part of the shock strut. Use a crowbar.
  8. Step 10
    Lower the car.
    Step 11
    Open the bonnet.
    Step 12
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 13
    Clean the fasteners of the shock strut upper mount. Use a wire brush. Use WD-40 spray.
    Step 14
    Need to know how to renew Strut Mount on MERCEDES-BENZ E-CLASS 2003? This free workshop manual will help you to do it yourself
    Unscrew the top fastening of the shock strut mount. Use a drive socket #13. Use a ratchet wrench.
    AUTODOC recommends:
    Important! Hold the suspension strut while unscrewing the fastening bolts. MERCEDES-BENZ E-CLASS T-Model (S211)
  9. Step 15
    Changing of Strut Mount on Mercedes S211 2004 won't be an issue if you follow this illustrated step-by-step guide
    Remove the suspension strut.
  10. Step 16
    MERCEDES-BENZ E-CLASS E 200 1.8 Kompressor (211.241) Strut Mount replacement: online guides and video tutorials
    Set the shock absorber strut on the spring compressor tool.
    Replacement: strut mount – MERCEDES-BENZ E-CLASS T-Model (S211). Tip from AUTODOC:
    Note that when using a spring compressor, spring coils need to be securely gripped, compressing the spring on the opposite sides.Ensure the correct position of the spring in the retainer.Make sure that the spring coils tightly entered the lock handles.
  11. Step 17
    Replacing Strut Mount on Mercedes S211 2006 E 220 CDI 2.2 (211.208) by yourself
    Compress the spring.
  12. Step 18
    E-Class T-modell (S211) E 280 CDI 3.0 (211.220) 2007 Strut Mount DIY replacement workshop manual
    Treat the shock strut rod. Use a wire brush. Use WD-40 spray.
  13. Step 19
    How to change Strut Mount on MERCEDES-BENZ E-Class T-modell (S211) 2008 - tips and tricks
    Remove the strut piston rod nut. Use a drive socket #17. Use a ratchet wrench.
  14. Step 20
    Step-by-step recommendations for DIY replacement Mercedes S211 2009 E 280 CDI 3.0 (211.220) Strut Mount
    Remove the top strut mount. Use a flat screwdriver.
    Replacement: strut mount – MERCEDES-BENZ E-CLASS T-Model (S211). AUTODOC experts recommend:
    Examine the shock absorber dust cap and the bump stop. Replace them if necessary.
  15. Step 21
    DIY replacement of Strut Mount on MERCEDES-BENZ E-Class T-modell (S211) E 320 CDI 3.2 (211.226) 2003 is not an issue anymore with our step-by-step tutorial
    Remove the rubber spring spacer. Use a flat screwdriver.
  16. Step 22
    How to change Strut Mount on Mercedes S211 2003 - free PDF and video manuals
    Install the rubber spring spacer.
  17. Step 23
    Clean the mounting seat of the shock strut mount. Use a wire brush. Use WD-40 spray.
    Step 24
    How to replace MERCEDES-BENZ E-Class T-modell (S211) E 220 CDI 2.2 (211.208) 2004 Strut Mount - step-by-step manuals and video guides
    Install a new top shock strut mount.
  18. Step 25
    Mercedes S211 E 220 CDI 2.2 (211.206) 2005 Strut Mount replacement: free workshop manuals
    Tighten the shock strut piston rod nut. Use a drive socket #17. Use a torque wrench. Tighten it to 23 Nm torque.
    Replacement: strut mount – MERCEDES-BENZ E-CLASS T-Model (S211). Professionals recommend:
    Check to make sure the spring is positioned correctly. Avoid its misalignment.
  19. Step 26
    Changing Strut Mount on MERCEDES-BENZ E-Class T-modell (S211) E 320 CDI 3.0 (211.222) 2006 by yourself
    Treat the shock strut rod. Use copper grease.
  20. Step 27
    How to remove MERCEDES-BENZ E-CLASS E 280 CDI 3.0 (211.220) 2007 Strut Mount - online easy-to-follow instructions
    Decompress the spring.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ E-Class T-modell (S211) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
MERCEDES-BENZ E-Class T-modell (S211) Strut Mount replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY MERCEDES-BENZ E-Class T-modell (S211) Strut Mount replacement - online guide
Tips & tricks for your MERCEDES-BENZ E-Class T-modell (S211)
View more
  • How to change Strut mount on MERCEDES-BENZ E-Class T-modell (S211) E 320 CDI 3.2 (211.226) - replacement tricks
    Top 5 mistakes when working in the engine bay | AUTODOC tips
  • Changing Top mount Mercedes S211 E 220 CDI 2.2 (211.208) - Replacement Tips
    How to polish your car | AUTODOC tips
  • Maintenance Hacks - MERCEDES-BENZ E-Class T-modell (S211) E 220 CDI 2.2 (211.206) Top strut mount replacement guide
    Causes of a worn car boot damper | AUTODOC
  • Replace Top mounts on Mercedes S211 - free video tips
    DIY valve cover restoration | AUTODOC tips