
Disclaimer
How to change spark plugs on VAUXHALL Rascal Minibus (RAS) petrol – replacement guide
downloads:
0
Views:
2

Recommended replacement interval for the part category Spark plug : 18 month / 30000 km
Important!
This replacement procedure can be used for:
VAUXHALL Rascal Minibus (RAS) 1.0 … View more
The steps may slightly vary depending on the car design.
VAUXHALL Rascal Minibus (RAS) 1.0 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Spark Plug for Rascal Minibus (RAS) and other VAUXHALL models
Spark plug
Alternative products

Electronic spray
High-temperature anti-seize lubricant
Torx bit T40
Spark plug socket # 16
Ratchet wrench
Torque wrench
Flat Screwdriver
Fender cover
Replacement: spark plugs – VAUXHALL Rascal Bus (RAS). AUTODOC experts recommend:
- The replacement procedure is the same for all spark plugs.
- All work should be done with the engine stopped.
Replacement: spark plugs – VAUXHALL Rascal Bus (RAS). Recommended sequence of steps:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Undo the engine cover screws. Use a flat screwdriver.
- Step 4Remove the engine cover.
- Step 5Detach the connector from the ignition coil. Use a flat screwdriver.
- Step 6Unscrew the ignition coil bracket. Use Torx T40. Use a ratchet wrench.
- Step 7Take out the ignition coil from the spark plug well. Use a flat screwdriver.
- Step 8Clean dirt, dust and debris from inside the spark plug wells.
- Step 9Unscrew the spark plugs. Use the spark plug socket #16. Use a ratchet wrench.Replacement: spark plugs – VAUXHALL Rascal Bus (RAS). Tip:Make sure that the threaded part of the spark plug and the electrodes are clean and dry.
- Step 10Take out the spark plugs.
- Step 11Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs.
- Step 12Install the new spark plugs into their mounting seats.Step 13Screw new spark plugs and tighten them. Use the spark plug socket #16. Use a torque wrench. Tighten it to 24 nm torque.Replacement: spark plugs – VAUXHALL Rascal Bus (RAS). Tip from AUTODOC:Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VAUXHALL Rascal Minibus (RAS) model
Popular maintenance tutorials for VAUXHALL Rascal Bus (RAS)
Complete guides for changing the Engine spark plug on different VAUXHALL RASCAL models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VAUXHALL Rascal Minibus (RAS)
View more
- How to prevent car windows from fogging up | AUTODOC tips
- #DIY Guide: How to Fix a Cracked Windscreen Without a Garage Visit
- Top 5 Mistakes to Avoid for Safe Engine Bay Repairs | AUTODOC Tips
- #DIY guide: Changing your car's color with a spray can | AUTODOC tips
Most commonly replaced car parts on VAUXHALL RASCAL
Time to replace parts? Get even better deals in our Shop app.

SCAN ME