Disclaimer
How to change spark plugs on NISSAN PRIMASTAR Bus (X83) – replacement guide
downloads:
2
Views:
25
Recommended replacement interval for the part category Spark plug : 90000 km
Important!
This replacement procedure can be used for:
NISSAN PRIMASTAR Bus (X83) 2.0 … View more
The steps may slightly vary depending on the car design.
NISSAN PRIMASTAR Bus (X83) 2.0 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Spark Plug for PRIMASTAR Bus (X83) and other NISSAN models
Alternative products

High-temperature anti-seize lubricant
Electronic spray
Drive socket # 10
Spark plug socket # 16
Ratchet wrench
Torque wrench
Fender cover
Replacement: spark plugs – NISSAN PRIMASTAR Bus (X83). Professionals recommend:
- The replacement procedure is the same for all spark plugs.
- All work should be done with the engine stopped.
Replacement: spark plugs – NISSAN PRIMASTAR Bus (X83). Take the following steps:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Unplug the connectors from the ignition coils. - Step 4
Unscrew the ignition coil bracket. Use a drive socket #10. Use a ratchet wrench. - Step 5
Take out the ignition coils from the spark plug wells.Replacement: spark plugs – NISSAN PRIMASTAR Bus (X83). Tip from AUTODOC experts:Remember the sequence of steps for ignition coil demounting. - Step 6
Clean dirt, dust and debris from inside the spark plug wells. - Step 7
Unscrew the spark plugs. Use the spark plug socket #16. Use a ratchet wrench. - Step 8
Take out the spark plugs. - Step 9
Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs. - Step 10
Install the new spark plugs into their mounting seats. - Step 11
Screw new spark plugs and tighten them. Use the spark plug socket #16. Use a torque wrench. Tighten it to 25 nm torque.Replacement: spark plugs – NISSAN PRIMASTAR Bus (X83). Tip:Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the NISSAN Primastar Minibus (X83) model
Popular maintenance tutorials for Nissan Primastar Minibus
Complete guides for changing the Engine spark plug on different NISSAN PRIMASTAR models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your NISSAN PRIMASTAR Bus (X83)
View more
How to choose the right engine oil for your car | AUTODOC
CHECK ENGINE light turned on – step-by-step guide on what to do
Motorcycle fuel tank restoration
Revive Your Tyres: Expert Tips for a Lasting Shine | AUTODOC Guide
Most commonly replaced car parts on NISSAN PRIMASTAR
Time to replace parts? Get even better deals in our Shop app.

SCAN ME























