When to replace the Spark Plug on your CITROËN XSARA
Recommended replacement interval for the part category Spark plug : 60000 km
Important!
This replacement procedure can be used for:
CITROËN XSARA Break (N2) 1.4 i, CITROËN XSARA Break (N2) 1.6 i, CITROËN XSARA Break (N2) 1.8 i, CITROËN XSARA Break (N2) 1.8 i Aut., CITROËN XSARA Break (N2) 1.8 i 16V, CITROËN XSARA Break (N2) 2.0 16V, CITROËN XSARA Break (N2) 1.8 LPG, CITROËN XSARA Break (N2) 1.4 LPG View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Spark Plug for XSARA Break (N2) and other CITROËN models
Alternative products
How to change Spark plug on Citroen Xsara Estate 2.0 HDI – step-by-step instructions for straightforward car repair Spark plug
Tools
Replacement: spark plugs – CITROËN XSARA Break (N2). Tools you need:
High-temperature anti-seize lubricant
Drive socket # 10
Spark plug socket # 16
Ratchet wrench
Torque wrench
Telescoping magnet
Fender cover
Replacement: spark plugs – CITROËN XSARA Break (N2). AUTODOC experts recommend:
  • The replacement procedure is the same for all spark plugs.
  • All work should be done with the engine stopped.
Replacement: spark plugs – CITROËN XSARA Break (N2). Recommended sequence of steps:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Spark Plug on Citroen Xsara Estate 1997 - free PDF and video manuals
    Detach the PCV valve.
  2. Step 4
    How to replace CITROËN XSARA Break (N2) 2.0 HDI 1998 Spark Plug - step-by-step manuals and video guides
    Disconnect the crankcase ventilation hose from the intake manifold.
  3. Step 5
    Remove the crankcase ventilation hoses.
    Step 6
    Citroen Xsara Estate 1.6 16V 1999 Spark Plug replacement: free workshop manuals
    Disconnect the crankcase ventilation hose from the air duct.
  4. Step 7
    Changing Spark Plug on CITROËN XSARA Break (N2) 1.4 i 2000 by yourself
    Detach the throttle valve connectors.
  5. Step 8
    How to remove CITROËN XSARA 1.6 i 2001 Spark Plug - online easy-to-follow instructions
    Detach the connector from the ignition coil.
  6. Step 9
    How to replace Spark Plug on CITROËN XSARA Break (N2) 2002: download PDF manuals and video instructions
    Detach the connector from the intake manifold.
  7. Step 10
    How hard is it to do yourself: Spark Plug replacement on Citroen Xsara Estate 1.4 HDi 2003 - download illustrated guide
    Cover the PCV valve hole with a microfibre cloth to prevent dirt and foreign objects from getting into the system.
  8. Step 11
    Need to know how to renew Spark Plug on CITROËN XSARA 2004? This free workshop manual will help you to do it yourself
    Unscrew the ignition coil bracket. Use a drive socket #10. Use a ratchet wrench.
  9. Step 12
    Changing of Spark Plug on Citroen Xsara Estate 2005 won't be an issue if you follow this illustrated step-by-step guide
    Pry up the ignition coil. Take out the ignition coil from the spark plug well.
  10. Step 13
    CITROËN XSARA 1.9 D Spark Plug replacement: online guides and video tutorials
    Clean dirt, dust and debris from inside the spark plug wells.
  11. Step 14
    Replacing Spark Plug on Citroen Xsara Estate 2007 2.0 HDI by yourself
    Unscrew the spark plugs. Use the spark plug socket #16. Use a ratchet wrench.
  12. Step 15
    XSARA Break (N2) 1.6 i 2008 Spark Plug DIY replacement workshop manual
    Take out the spark plugs. Use a telescoping magnet.
  13. Step 16
    Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs.
    Step 17
    How to change Spark Plug on CITROËN XSARA Break (N2) 2009 - tips and tricks
    Install the new spark plugs into their mounting seats. Use the spark plug socket #16.
  14. Step 18
    Step-by-step recommendations for DIY replacement Citroen Xsara Estate 2010 1.6 i Spark Plug
    Screw new spark plugs and tighten them. Use the spark plug socket #16. Use a torque wrench. Tighten it to 28 nm torque.
    Replacement: spark plugs – CITROËN XSARA Break (N2). AUTODOC recommends:
    Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
  15. Step 19
    DIY replacement of Spark Plug on CITROËN XSARA Break (N2) 2.0 HDi 1997 is not an issue anymore with our step-by-step tutorial
    Treat the ignition coil tips. Use high-temperature grease.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the CITROËN Xsara Estate (N2) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY CITROËN XSARA Break (N2) Spark Plug replacement - online guide
Tips & tricks for your CITROËN XSARA Break (N2)
View more
  • How to change Engine spark plug on CITROËN XSARA Break (N2) 2.0 HDi - replacement tricks
    Initial Car Inspection: What to Check Before You Buy
  • Changing Spark plug Citroen Xsara Estate 2.0 HDI - Replacement Tips
    Top 5 reasons why your car squeals | AUTODOC Tips
  • Maintenance Hacks - CITROËN XSARA Break (N2) 1.6 16V Engine spark plugs replacement guide
    Understanding Car Tools: The Key Differences You Need to Know | AUTODOC tips
  • Replace Spark plug set on Citroen Xsara Estate - free video tips
    How to Swap an M50 Engine in a BMW E30 Turbo | AUTODOC Project
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
CITROËN XSARA Break (N2) Spark Plug replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME