When to replace the Poly V-Belt on your CITROËN XSARA
Recommended replacement interval for the part category Serpentine belt : 30000 km
Important!
This replacement procedure can be used for:
CITROËN XSARA Break (N2) 2.0 HDi, CITROËN XSARA Break (N2) 2.0 HDI View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Poly V-Belt for XSARA Break (N2) and other CITROËN models
Alternative products
How to change Serpentine belt on Citroen Xsara Estate 2.0 HDI – step-by-step instructions for straightforward car repair Serpentine belt
Tools
Replacement: serpentine belt – CITROËN XSARA Break (N2). Tools you'll need:
Combination spanner #16
Fender cover
Replacement: serpentine belt – CITROËN XSARA Break (N2). Professionals recommend:
  • All work should be done with the engine stopped.
Replacement: serpentine belt – CITROËN XSARA Break (N2). Take the following steps:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Lift the car using a jack or place it over an inspection pit.
    Step 4
    How to change Poly V-Belt on Citroen Xsara Estate 1997 - free PDF and video manuals
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
  2. Step 5
    How to replace CITROËN XSARA Break (N2) 2.0 HDI 1998 Poly V-Belt - step-by-step manuals and video guides
    Remove the V-ribbed belt.
  3. Step 6
    Citroen Xsara Estate 1.6 16V 1999 Poly V-Belt replacement: free workshop manuals
    Return the tensioner pulley to its initial position.
    Replacement: serpentine belt – CITROËN XSARA Break (N2). Tip from AUTODOC:
    Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
  4. Step 7
    Install the V-ribbed belt.
    Replacement: serpentine belt – CITROËN XSARA Break (N2). AUTODOC recommends:
    Make sure that the V-ribbed belt fits all pulleys snugly.
    Step 8
    Changing Poly V-Belt on CITROËN XSARA Break (N2) 1.4 i 2000 by yourself
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the CITROËN Xsara Estate (N2) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY CITROËN XSARA Break (N2) Poly V-Belt replacement - online guide
Tips & tricks for your CITROËN XSARA Break (N2)
View more
  • How to change Alternator belt on CITROËN XSARA Break (N2) 2.0 HDi - replacement tricks
    The most common problems when buying a used car | AUTODOC
  • Changing Auxiliary belt Citroen Xsara Estate 2.0 HDI - Replacement Tips
    Top 5 car noises you shouldn't ignore
  • Maintenance Hacks - CITROËN XSARA Break (N2) 1.6 16V Poly V-belt replacement guide
    Deep interior cleaning | Car transformation by detailing
  • Replace Drive belt on Citroen Xsara Estate - free video tips
    Checking the starter without removing it | AUTODOC tips
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
CITROËN XSARA Break (N2) Poly V-Belt replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME