
Disclaimer
How to change spark plugs on AUDI A6 Saloon (4F2, C6) – replacement guide
downloads:
6
Views:
113

Recommended replacement interval for the part category Spark plug : 6 year / 90000 km
Important!
This replacement procedure can be used for:
AUDI A6 Saloon (4F2, C6) 2.0 TFSI … View more
The steps may slightly vary depending on the car design.
AUDI A6 Saloon (4F2, C6) 2.0 TFSI … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Spark Plug for A6 Saloon (4F2, C6) and other AUDI models
Spark plug
Alternative products

High-temperature anti-seize lubricant
Electronic spray
Spark plug socket # 16
Ratchet wrench
Torque wrench
Crow bar
Fender cover
Replacement: spark plugs – AUDI A6 (4F2, C6). Professionals recommend:
- The replacement procedure is the same for all spark plugs.
- All work should be done with the engine stopped.
Replacement: spark plugs – AUDI A6 (4F2, C6). Take the following steps:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Remove the engine cover.
- Step 4Unplug the connectors from the ignition coils.
- Step 5Raise a little the wiring of the ignition coils and move it aside.
- Step 6Pry up the ignition coil (4 pieces). Use a crowbar.
- Step 7Take out the ignition coils from the spark plug wells.Replacement: spark plugs – AUDI A6 (4F2, C6). Tip:Remember the sequence of steps for ignition coil demounting.
- Step 8Clean dirt, dust and debris from inside the spark plug wells.
- Step 9Unscrew the spark plugs. Use the spark plug socket #16. Use a ratchet wrench.
- Step 10Take out the spark plugs.
- Step 11Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs. Treat the surface of the terminals of the new spark plugs. Use high-temperature grease.
- Step 12Install the new spark plugs into their mounting seats.
- Step 13Screw new spark plugs and tighten them. Use the spark plug socket #16. Use a torque wrench. Tighten it to 25 nm torque.Replacement: spark plugs – AUDI A6 (4F2, C6). AUTODOC recommends:Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the AUDI A6 C6 Saloon (4F2) model
Popular maintenance tutorials for Audi A6 C6
Complete guides for changing the Engine spark plug on different AUDI A6 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your AUDI A6 Saloon (4F2, C6)
View more
- Stop Rust Before It Starts: Top 5 Tips for Car Body Protection | AUTODOC Insights
- Unveiling the secrets: Detecting vacuum leaks with a Smoke Machine | AUTODOC
- #DIY Wheel Rim Restoration: Revive Scratches and Chips Easily!
- How to Fix P0401 ✅ error code Insufficient EGR flow
Most commonly replaced car parts on AUDI A6
Time to replace parts? Get even better deals in our Shop app.

SCAN ME