Disclaimer
How to change spark plugs on AUDI A6 Avant (4F5, C6) – replacement guide
downloads:
6
Views:
153
Recommended replacement interval for the part category Spark plug : 6 year / 90000 km
Important!
This replacement procedure can be used for:
AUDI A6 Avant (4F5, C6) 2.0 TFSI … View more
The steps may slightly vary depending on the car design.
AUDI A6 Avant (4F5, C6) 2.0 TFSI … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Spark Plug for A6 Avant (4F5, C6) and other AUDI models
Alternative products

High-temperature anti-seize lubricant
Electronic spray
Spark plug socket # 16
Ratchet wrench
Torque wrench
Crow bar
Fender cover
Replacement: spark plugs – AUDI A6 Avant (4F5, C6). Professionals recommend:
- The replacement procedure is the same for all spark plugs.
- All work should be done with the engine stopped.
Replacement: spark plugs – AUDI A6 Avant (4F5, C6). Take the following steps:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Remove the engine cover. - Step 4
Unplug the connectors from the ignition coils. - Step 5
Raise a little the wiring of the ignition coils and move it aside. - Step 6
Pry up the ignition coil (4 pieces). Use a crowbar. - Step 7
Take out the ignition coils from the spark plug wells.Replacement: spark plugs – AUDI A6 Avant (4F5, C6). Tip:Remember the sequence of steps for ignition coil demounting. - Step 8
Clean dirt, dust and debris from inside the spark plug wells. - Step 9
Unscrew the spark plugs. Use the spark plug socket #16. Use a ratchet wrench. - Step 10
Take out the spark plugs. - Step 11
Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs. Treat the surface of the terminals of the new spark plugs. Use high-temperature grease. - Step 12
Install the new spark plugs into their mounting seats. - Step 13
Screw new spark plugs and tighten them. Use the spark plug socket #16. Use a torque wrench. Tighten it to 25 nm torque.Replacement: spark plugs – AUDI A6 Avant (4F5, C6). AUTODOC recommends:Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the AUDI A6 C6 Avant (4F5) model
Popular maintenance tutorials for Audi A6 C6 Avant
Complete guides for changing the Engine spark plug on different AUDI A6 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your AUDI A6 Avant (4F5, C6)
View more
How to restore a steering wheel | AUTODOC tips
Top 5 reasons why the suspension knocks | AUTODOC tips
Revitalize Your Car Interior: DIY Steering Wheel Cover with AUTODOC Tips
3 essential tips for choosing summer tyres | Get ready for warmer weather
Most commonly replaced car parts on AUDI A6
Time to replace parts? Get even better deals in our Shop app.

SCAN ME


















