Disclaimer
How to change spark plugs on AUDI A5 Coupe (8T3) – replacement guide
downloads:
9
Views:
224
Recommended replacement interval for the part category Spark plug : 6 year / 90000 km
Important!
This replacement procedure can be used for:
AUDI A5 Coupe (8T3) 1.8 TFSI, AUDI A5 Coupe (8T3) 2.0 TFSI, AUDI A5 Coupe (8T3) 2.0 TFSI, AUDI A5 Coupe (8T3) 2.0 TFSI quattro, AUDI A5 Coupe (8T3) 1.8 TFSI, AUDI A5 Coupe (8T3) 2.0 TFSI quattro … View more
The steps may slightly vary depending on the car design.
AUDI A5 Coupe (8T3) 1.8 TFSI, AUDI A5 Coupe (8T3) 2.0 TFSI, AUDI A5 Coupe (8T3) 2.0 TFSI, AUDI A5 Coupe (8T3) 2.0 TFSI quattro, AUDI A5 Coupe (8T3) 1.8 TFSI, AUDI A5 Coupe (8T3) 2.0 TFSI quattro … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Spark Plug for A5 Coupe (8T3) and other AUDI models
Alternative products

High-temperature anti-seize lubricant
Electronic spray
Spark plug socket # 16
Ratchet wrench
Torque wrench
Crow bar
Fender cover
Replacement: spark plugs – AUDI A5 (8T3). Professionals recommend:
- The replacement procedure is the same for all spark plugs.
- All work should be done with the engine stopped.
Replacement: spark plugs – AUDI A5 (8T3). Take the following steps:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Remove the engine cover. - Step 4
Unplug the connectors from the ignition coils. - Step 5
Raise a little the wiring of the ignition coils and move it aside. - Step 6
Pry up the ignition coil (4 pieces). Use a crowbar. - Step 7
Take out the ignition coils from the spark plug wells.Replacement: spark plugs – AUDI A5 (8T3). Tip:Remember the sequence of steps for ignition coil demounting. - Step 8
Clean dirt, dust and debris from inside the spark plug wells. - Step 9
Unscrew the spark plugs. Use the spark plug socket #16. Use a ratchet wrench. - Step 10
Take out the spark plugs. - Step 11
Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs. Treat the surface of the terminals of the new spark plugs. Use high-temperature grease. - Step 12
Install the new spark plugs into their mounting seats. - Step 13
Screw new spark plugs and tighten them. Use the spark plug socket #16. Use a torque wrench. Tighten it to 25 nm torque.Replacement: spark plugs – AUDI A5 (8T3). AUTODOC recommends:Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the AUDI A5 B8 Coupe (8T3) model
Popular maintenance tutorials for Audi A5 B8
Complete guides for changing the Engine spark plug on different AUDI A5 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your AUDI A5 Coupe (8T3)
View more
How to unlock your car without a key | AUTODOC tips
Why Checking Your Oil is Crucial for Engine Performance
#DIY Guide: How to Fix a Cracked Windscreen Without a Garage Visit
Extend your engine's life: Avoid these 3 damaging factors | AUTODOC tips
Most commonly replaced car parts on AUDI A5
Time to replace parts? Get even better deals in our Shop app.

SCAN ME


















