Disclaimer
How to change spark plugs on AUDI A2 (8Z0) – replacement guide
downloads:
8
Views:
124
Recommended replacement interval for the part category Spark plug : 4 year / 60000 km
Important!
This replacement procedure can be used for:
AUDI A2 (8Z0) 1.4 … View more
The steps may slightly vary depending on the car design.
AUDI A2 (8Z0) 1.4 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Spark Plug for A2 (8Z0) and other AUDI models
Alternative products

Electronic spray
High-temperature anti-seize lubricant
Spark plug socket # 16
Ratchet wrench
Torque wrench
Flat screwdriver
Crow bar
Telescoping magnet
Microfibre towel
Fender cover
Replacement: spark plugs – AUDI A2 (8Z0). AUTODOC experts recommend:
- Follow the terms, recommendations and requirements of the part operation provided by the manufacturer.
- All work should be done with the engine stopped.
Replacement: spark plugs – AUDI A2 (8Z0). Use the following procedure:
- Step 1
Open the hood. - Step 2
Use a fender protection cover to prevent damaging paintwork and plastic parts of the car. - Step 3
Detach the crankcase ventilation hose from the engine cover at the left. - Step 4
Remove the engine cover. - Step 5
Cover the throttle body with a microfibre towel to prevent dust and dirt from getting into the system. - Step 6
Detach the crankcase ventilation hose from the oil filler neck. - Step 7
Unscrew the oil filler neck. Remove the oil filler neck. - Step 8
Cover the oil filler opening with a microfibre towel to prevent dirt and foreign objects from getting into the system. - Step 9
Pry up the ignition coil. Use a crowbar. Use a flat screwdriver. - Step 10
Undo the plastic locking tabs of the ignition coil connector. Use a flat screwdriver. - Step 11
Take out the ignition coil from the spark plug well.Replacement: spark plugs – AUDI A2 (8Z0). AUTODOC experts recommend:Remember the sequence of steps for ignition coil demounting. - Step 12
Clean dirt, dust and debris from inside the spark plug wells. - Step 13
Unscrew the spark plugs. Use the spark plug socket #16. Use a ratchet wrench. - Step 14
Take out the spark plugs. Use a telescoping magnet. - Step 15
Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs. Treat the surface of the terminals of the new spark plugs. Use electronic spray. - Step 16
Install the new spark plugs into their mounting seats. - Step 17
Screw new spark plugs and tighten them. Use the spark plug socket #16. Use a torque wrench. Tighten it to 25 nm torque.Replacement: spark plugs – AUDI A2 (8Z0). AUTODOC recommends:Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the AUDI A2 (8Z0) model
Popular maintenance tutorials for AUDI A2 (8Z0)
Complete guides for changing the Engine spark plug on different AUDI A2 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your AUDI A2 (8Z0)
View more
#DIY Guide: How to Fix a Cracked Windscreen Without a Garage Visit
How to align the timing marks correctly on an EA888 engine
How to Polish Your Car Yourself and Save Money on Garage Services | AUTODOC tips
Top 5 Mistakes to Avoid for Safe Engine Bay Repairs | AUTODOC Tips
Most commonly replaced car parts on AUDI A2
Time to replace parts? Get even better deals in our Shop app.

SCAN ME
























