When to replace the Poly V-Belt on your VW NEW BEETLE
Recommended replacement interval for the part category Serpentine belt : 30000 km
Important!
This replacement procedure can be used for:
VW New Beetle Hatchback (9C1, 1C1) 1.8 T, VW New Beetle Hatchback (9C1, 1C1) 1.9 TDI, VW New Beetle Hatchback (9C1, 1C1) 1.9 TDI, VW New Beetle Hatchback (9C1, 1C1) 1.6, VW New Beetle Hatchback (9C1, 1C1) 1.8 T, VW New Beetle Hatchback (9C1, 1C1) 1.6, VW New Beetle Hatchback (9C1, 1C1) 2.0 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Poly V-Belt for New Beetle Hatchback (9C1, 1C1) and other VW models
How to change Serpentine belt on VW Beetle 9c 2.0 – step-by-step instructions for straightforward car repair Serpentine belt
How to change V-Ribbed Belt Set on VW Beetle 9c 2.0 – step-by-step instructions for straightforward car repair V-Ribbed Belt Set
Tools
Replacement: serpentine belt – VW NEW BEETLE (9C1, 1C1). Tools you might need:
Brake cleaner
Copper grease
Drive socket # 16
Torx bit T20
Combination spanner #16
Wheel impact socket #17
Ratchet wrench
Torque wrench
Tap wrench
Flat Screwdriver
Fender cover
Wheel chock
Replacement: serpentine belt – VW NEW BEETLE (9C1, 1C1). AUTODOC experts recommend:
  • All work should be done with the engine stopped.
Replacement: serpentine belt – VW NEW BEETLE (9C1, 1C1). Take the following steps:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Secure the wheels with chocks.
    Step 4
    How to change Poly V-Belt on VW Beetle 9c 1998 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  2. Step 5
    Lift the car using a jack or place it over an inspection pit.
    Step 6
    How to replace VW New Beetle Hatchback (9C1, 1C1) 2.0 1999 Poly V-Belt - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. VW NEW BEETLE (9C1, 1C1)
  3. Step 7
    VW Beetle 9c 1.9 TDI 2000 Poly V-Belt replacement: free workshop manuals
    Remove the wheel.
  4. Step 8
    Changing Poly V-Belt on VW New Beetle Hatchback (9C1, 1C1) 1.8 T 2001 by yourself
    Undo the fasteners of the oil pan lower cover. Unscrew the fastener of the side plastic cover of the engine. Use Torx T20. Use a ratchet wrench. Use a flat screwdriver.
  5. Step 9
    How to remove VW NEW BEETLE 1.4 2002 Poly V-Belt - online easy-to-follow instructions
    Remove the oil pan cover. Remove the side plastic cover.
  6. Step 10
    How to replace Poly V-Belt on VW New Beetle Hatchback (9C1, 1C1) 2003: download PDF manuals and video instructions
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
  7. Step 11
    How hard is it to do yourself: Poly V-Belt replacement on VW Beetle 9c 2.5 2004 - download illustrated guide
    Remove the V-ribbed belt.
  8. Step 12
    Need to know how to renew Poly V-Belt on VW NEW BEETLE 2005? This free workshop manual will help you to do it yourself
    Return the tensioner pulley to its initial position.
    Replacement: serpentine belt – VW NEW BEETLE (9C1, 1C1). Tip from AUTODOC:
    Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
  9. Step 13
    Changing of Poly V-Belt on VW Beetle 9c 2006 won't be an issue if you follow this illustrated step-by-step guide
    Install the V-ribbed belt.
    Replacement: serpentine belt – VW NEW BEETLE (9C1, 1C1). Tip:
    Make sure that the V-ribbed belt fits all pulleys snugly.
  10. Step 14
    VW NEW BEETLE 1.9 TDI Poly V-Belt replacement: online guides and video tutorials
    Pull aside the V-ribbed belt tensioner pulley. Use a drive socket #16. Use a tap wrench.
  11. Step 15
    Replacing Poly V-Belt on VW Beetle 9c 2008 2.0 by yourself
    Place the V-ribbed belt on the tensioner pulley.
  12. Step 16
    New Beetle Hatchback (9C1, 1C1) 1.4 2009 Poly V-Belt DIY replacement workshop manual
    Return the tensioner pulley to its initial position.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
VW New Beetle Hatchback (9C1, 1C1) Poly V-Belt replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY VW New Beetle Hatchback (9C1, 1C1) Poly V-Belt replacement - online guide
Tips & tricks for your VW New Beetle Hatchback (9C1, 1C1)
View more
  • How to change Alternator belt on VW New Beetle Hatchback (9C1, 1C1) 1.6 - replacement tricks
    How to prevent car windows from fogging up | AUTODOC tips
  • Changing Auxiliary belt VW Beetle 9c 2.0 - Replacement Tips
    How to replace the suspension on a BMW E30 Turbo | SUPERCAR AUTODOC
  • Maintenance Hacks - VW New Beetle Hatchback (9C1, 1C1) 1.9 TDI Poly V-belt replacement guide
    DIY valve cover restoration | AUTODOC tips
  • Replace Drive belt on VW Beetle 9c - free video tips
    How to easily repair a punctured tyre | AUTODOC tips