Disclaimer
How to change serpentine belt on VW Golf VII Variant (BA5, BV5) – replacement guide
downloads:
3
Views:
39
Recommended replacement interval for the part category Serpentine belt : 30000 km
Important!
This replacement procedure can be used for:
VW Golf VII Variant (BA5, BV5) 1.4 TSI, VW Golf VII Variant (BA5, BV5) 1.4 TGI CNG, VW Golf VII Variant (BA5, BV5) 1.2 TSI, VW Golf VII Variant (BA5, BV5) 1.2 TSI, VW Golf VII Variant (BA5, BV5) 1.4 TSI, VW Golf VII Variant (BA5, BV5) 1.4 TSI MultiFuel, VW Golf VII Variant (BA5, BV5) 1.6 … View more
The steps may slightly vary depending on the car design.
VW Golf VII Variant (BA5, BV5) 1.4 TSI, VW Golf VII Variant (BA5, BV5) 1.4 TGI CNG, VW Golf VII Variant (BA5, BV5) 1.2 TSI, VW Golf VII Variant (BA5, BV5) 1.2 TSI, VW Golf VII Variant (BA5, BV5) 1.4 TSI, VW Golf VII Variant (BA5, BV5) 1.4 TSI MultiFuel, VW Golf VII Variant (BA5, BV5) 1.6 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Poly V-Belt for Golf VII Variant (BA5, BV5) and other VW models
Alternative products

Combination spanner #16
Fender cover
Replacement: serpentine belt – VW GOLF VII Estate (BA5). AUTODOC experts recommend:
- All work should be done with the engine stopped.
Replacement: serpentine belt – VW GOLF VII Estate (BA5). Use the following procedure:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Lift the car using a jack or place it over an inspection pit.Step 4
Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16. - Step 5
Remove the V-ribbed belt. - Step 6
Return the tensioner pulley to its initial position.Replacement: serpentine belt – VW GOLF VII Estate (BA5). Tip:Check the condition of the tensioner pulley and idler pulley. Replace them if necessary. - Step 7
Install the V-ribbed belt.Replacement: serpentine belt – VW GOLF VII Estate (BA5). AUTODOC recommends:Make sure that the V-ribbed belt fits all pulleys snugly. - Step 8
Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VW Golf VII Variant (BA5, BV5) model
Popular maintenance tutorials for Golf BA5
Complete guides for changing the Alternator belt on different VW GOLF models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VW Golf VII Variant (BA5, BV5)
View more
Top 5 car noises you shouldn't ignore
2 ways to clean the EGR valve – which one is better?
DIY starter repair | AUTODOC tips
Don’t Replace, Just Polish! Headlight Restoration with AUTODOC
Most commonly replaced car parts on VW GOLF
Time to replace parts? Get even better deals in our Shop app.

SCAN ME






















