
Disclaimer
How to change serpentine belt on VAUXHALL COMBO TOUR Mk II (C) (F25) – replacement guide
downloads:
5
Views:
258

Recommended replacement interval for the part category Serpentine belt : 30000 km
Important!
This replacement procedure can be used for:
VAUXHALL COMBO TOUR Mk II (C) (F25) 1.3 CDTI 16V, VAUXHALL COMBO TOUR Mk II (C) (F25) 1.3 CDTI 16V … View more
The steps may slightly vary depending on the car design.
VAUXHALL COMBO TOUR Mk II (C) (F25) 1.3 CDTI 16V, VAUXHALL COMBO TOUR Mk II (C) (F25) 1.3 CDTI 16V … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Poly V-Belt for COMBO TOUR Mk II (C) (F25) and other VAUXHALL models
Serpentine belt
Alternative products

Brake cleaner
Copper grease
Combination spanner #15
Torx bit T20
Wheel impact socket #17
Torque wrench
Fender cover
Wheel chock
Replacement: serpentine belt – VAUXHALL COMBO TOUR Mk II (C) (F25). AUTODOC experts recommend:
- All work should be done with the engine stopped.
Replacement: serpentine belt – VAUXHALL COMBO TOUR Mk II (C) (F25). Use the following procedure:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Secure the wheels with chocks.
- Step 4Loosen the wheel mounting bolts. Use wheel impact socket #17.
- Step 5Lift the car using a jack or place it over an inspection pit.Step 6Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. VAUXHALL COMBO TOUR Mk II (C) (F25)
- Step 7Remove the wheel.
- Step 8Unscrew and remove the wheel arch cover fasteners. Use Torx T20.
- Step 9Remove the wheel arch cover.
- Step 10Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #15.
- Step 11Remove the V-ribbed belt.Replacement: serpentine belt – VAUXHALL COMBO TOUR Mk II (C) (F25). AUTODOC recommends:Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
- Step 12Return the tensioner pulley to its initial position.
- Step 13Install the V-ribbed belt.Replacement: serpentine belt – VAUXHALL COMBO TOUR Mk II (C) (F25). Tip:Make sure that the V-ribbed belt fits all pulleys snugly.
- Step 14Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #15.
- Step 15Place the V-ribbed belt on the tensioner pulley.
- Step 16Return the tensioner pulley to its initial position. Use a combination spanner #15.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VAUXHALL Combo Tour Mk2 (C) (F25) model
Popular maintenance tutorials for VAUXHALL COMBO TOUR Mk II (C) (F25)
Complete guides for changing the Alternator belt on different VAUXHALL COMBO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VAUXHALL COMBO TOUR Mk II (C) (F25)
View more
- 5 most common causes of oil leaks | AUTODOC tips
- Top 5 mistakes when replacing spark plugs | AUTODOC tips
- Fuse Replacement Made Simple: Step-by-Step Guide | AUTODOC
- What causes engine misfire? | AUTODOC
Most commonly replaced car parts on VAUXHALL COMBO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME