Disclaimer
How to change serpentine belt on VAUXHALL Meriva Mk II (B) (S10) – replacement guide
downloads:
74
Views:
1268
Recommended replacement interval for the part category Serpentine belt : 10 year / 150000 km
Important!
This replacement procedure can be used for:
VAUXHALL Meriva Mk II (B) (S10) 1.3 CDTI, VAUXHALL Meriva Mk II (B) (S10) 1.3 CDTi … View more
The steps may slightly vary depending on the car design.
VAUXHALL Meriva Mk II (B) (S10) 1.3 CDTI, VAUXHALL Meriva Mk II (B) (S10) 1.3 CDTi … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Poly V-Belt for Meriva Mk II (B) (S10) and other VAUXHALL models
Alternative products

Brake cleaner
Copper grease
Combination spanner #15
Torx bit T20
Wheel impact socket #17
Torque wrench
Fender cover
Wheel chock
Replacement: serpentine belt – VAUXHALL MERIVA Mk II (B). AUTODOC experts recommend:
- All work should be done with the engine stopped.
Replacement: serpentine belt – VAUXHALL MERIVA Mk II (B). Use the following procedure:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Secure the wheels with chocks. - Step 4
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 5Lift the car using a jack or place it over an inspection pit.Step 6
Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. VAUXHALL MERIVA Mk II (B) - Step 7
Remove the wheel. - Step 8
Unscrew and remove the wheel arch cover fasteners. Use Torx T20. - Step 9
Remove the wheel arch cover. - Step 10
Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #15. - Step 11
Remove the V-ribbed belt.Replacement: serpentine belt – VAUXHALL MERIVA Mk II (B). AUTODOC recommends:Check the condition of the tensioner pulley and idler pulley. Replace them if necessary. - Step 12
Return the tensioner pulley to its initial position. - Step 13
Install the V-ribbed belt.Replacement: serpentine belt – VAUXHALL MERIVA Mk II (B). Tip:Make sure that the V-ribbed belt fits all pulleys snugly. - Step 14
Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #15. - Step 15
Place the V-ribbed belt on the tensioner pulley. - Step 16
Return the tensioner pulley to its initial position. Use a combination spanner #15.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VAUXHALL Meriva Mk2 (B) (S10) model
Popular maintenance tutorials for VAUXHALL MERIVA Mk II (B)
Complete guides for changing the Alternator belt on different VAUXHALL MERIVA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VAUXHALL Meriva Mk II (B) (S10)
View more
How to Safely Wash Your Car in Winter Without Damage | AUTODOC tips
The most common problems when buying a used car | AUTODOC
Transform Your Engine Bay: Affordable Valve Cover Restoration with AUTODOC
2 ways to clean the EGR valve – which one is better?
Most commonly replaced car parts on VAUXHALL MERIVA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME


























