
Disclaimer
How to change serpentine belt on VAUXHALL COMBO Mk II (C) Box Body / Estate (F25) – replacement guide
downloads:
5
Views:
83

Recommended replacement interval for the part category Serpentine belt : 10 year / 150000 km
Important!
This replacement procedure can be used for:
VAUXHALL COMBO Mk II (C) Box Body / Estate (F25) 1.3 CDTI 16V, VAUXHALL COMBO Mk II (C) Box Body / Estate (F25) 1.3 CDTI 16V … View more
The steps may slightly vary depending on the car design.
VAUXHALL COMBO Mk II (C) Box Body / Estate (F25) 1.3 CDTI 16V, VAUXHALL COMBO Mk II (C) Box Body / Estate (F25) 1.3 CDTI 16V … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Poly V-Belt for COMBO Mk II (C) Box Body / Estate (F25) and other VAUXHALL models
Serpentine belt
Alternative products

Brake cleaner
Copper grease
Combination spanner #15
Torx bit T20
Wheel impact socket #17
Torque wrench
Fender cover
Wheel chock
Replacement: serpentine belt – VAUXHALL COMBO Mk II (C) Box Body / Estate (F25). AUTODOC experts recommend:
- All work should be done with the engine stopped.
Replacement: serpentine belt – VAUXHALL COMBO Mk II (C) Box Body / Estate (F25). Use the following procedure:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Secure the wheels with chocks.
- Step 4Loosen the wheel mounting bolts. Use wheel impact socket #17.
- Step 5Lift the car using a jack or place it over an inspection pit.Step 6Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. VAUXHALL COMBO Mk II (C) Box Body / Estate (F25)
- Step 7Remove the wheel.
- Step 8Unscrew and remove the wheel arch cover fasteners. Use Torx T20.
- Step 9Remove the wheel arch cover.
- Step 10Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #15.
- Step 11Remove the V-ribbed belt.Replacement: serpentine belt – VAUXHALL COMBO Mk II (C) Box Body / Estate (F25). AUTODOC recommends:Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
- Step 12Return the tensioner pulley to its initial position.
- Step 13Install the V-ribbed belt.Replacement: serpentine belt – VAUXHALL COMBO Mk II (C) Box Body / Estate (F25). Tip:Make sure that the V-ribbed belt fits all pulleys snugly.
- Step 14Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #15.
- Step 15Place the V-ribbed belt on the tensioner pulley.
- Step 16Return the tensioner pulley to its initial position. Use a combination spanner #15.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VAUXHALL Combo Mk2 (C) Box Body / Estate (F25) model
Popular maintenance tutorials for VAUXHALL COMBO Mk II (C) Box Body / Estate (F25)
Complete guides for changing the Alternator belt on different VAUXHALL COMBO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VAUXHALL COMBO Mk II (C) Box Body / Estate (F25)
View more
- TOP 5 mistakes when replacing shock absorbers | AUTODOC tips
- Top 5 car noises you shouldn't ignore
- 5 more brake repair mistakes | Stop making these brake repair mistakes
- How to unlock your car without a key | AUTODOC tips
Most commonly replaced car parts on VAUXHALL COMBO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME