
Disclaimer
How to change glow plugs on VAUXHALL COMBO TOUR Mk II (C) (F25) – replacement guide
downloads:
7
Views:
125

Recommended replacement interval for the part category Glow plug : 30000 km
Important!
This replacement procedure can be used for:
VAUXHALL COMBO TOUR Mk II (C) (F25) 1.3 CDTI 16V, VAUXHALL COMBO TOUR Mk II (C) (F25) 1.3 CDTI 16V … View more
The steps may slightly vary depending on the car design.
VAUXHALL COMBO TOUR Mk II (C) (F25) 1.3 CDTI 16V, VAUXHALL COMBO TOUR Mk II (C) (F25) 1.3 CDTI 16V … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Glow Plugs for COMBO TOUR Mk II (C) (F25) and other VAUXHALL models
Glow plug
Alternative products

Injector & glow plug grease
Drive socket # 7
Spark plug socket # 8
Torx bit T25
Ratchet wrench
Torque wrench
Microfibre towel
Fender cover
Replacement: glow plugs – VAUXHALL COMBO TOUR Mk II (C) (F25). AUTODOC recommends:
- The replacement procedure is identical for all glow plugs.
- Before getting down to work, start the engine and let it warm up to operating temperature.
- Wear gloves to protect your hands from hot surfaces.
- All work should be done with the engine stopped.
Replacement: glow plugs – VAUXHALL COMBO TOUR Mk II (C) (F25). Take the following steps:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Remove the engine coverAUTODOC recommends:Replacement: glow plugs – VAUXHALL COMBO TOUR Mk II (C) (F25). To avoid damaging the part when removing it, do not use excessive force.
- Step 4Disconnect the air intake pipe fastening Use Torx T25. Use a ratchet wrench.
- Step 5Detach the air intake hose clamp. Use a drive socket #7. Use a ratchet wrench.
- Step 6Remove the air intake pipe.
- Step 7Cover the air intake hose with a microfibre towel to prevent dust and dirt from getting into the system.
- Step 8Detach the glow plug wiring connectors.
- Step 9Unscrew the glow plugs. Use the spark plug socket #8. Use a ratchet wrench.
- Step 10Remove the glow plugs.
- Step 11Treat the glow plugs. Use the injector & glow plug grease.Please note!Do not touch the heating element as fingerprints may cause malfunction.
- Step 12Install new glow plugs to their mounting seats.
- Step 13Tighten the glow plugs. Use the spark plug socket #8. Use a torque wrench. Tighten it to 10 nm torque.Replacement: glow plugs – VAUXHALL COMBO TOUR Mk II (C) (F25). Professionals recommend:Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VAUXHALL Combo Tour Mk2 (C) (F25) model
Popular maintenance tutorials for VAUXHALL COMBO TOUR Mk II (C) (F25)
Complete guides for changing the Glow plug on different VAUXHALL COMBO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VAUXHALL COMBO TOUR Mk II (C) (F25)
View more
- How to Get the Best Deals on Car Parts | Save Money with AUTODOC
- Why Checking Your Oil is Crucial for Engine Performance
- Transform Your Old Engine Valve Cover: Quick Polishing Tips for a Shiny Finish | AUTODOC Tips
- What causes engine misfire? | AUTODOC
Most commonly replaced car parts on VAUXHALL COMBO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME