Disclaimer
How to change serpentine belt on SKODA Octavia III Hatchback (5E3, NL3, NR3) – replacement guide
downloads:
17
Views:
121
Recommended replacement interval for the part category Serpentine belt : 30000 km
Important!
This replacement procedure can be used for:
SKODA Octavia III Hatchback (5E3, NL3, NR3) 1.6, SKODA Octavia III Hatchback (5E3, NL3, NR3) 1.4 TSI G-TEC, SKODA Octavia III Hatchback (5E3, NL3, NR3) 1.2 TSI, SKODA Octavia III Hatchback (5E3, NL3, NR3) 1.2 TSI, SKODA Octavia III Hatchback (5E3, NL3, NR3) 1.4 TSI … View more
The steps may slightly vary depending on the car design.
SKODA Octavia III Hatchback (5E3, NL3, NR3) 1.6, SKODA Octavia III Hatchback (5E3, NL3, NR3) 1.4 TSI G-TEC, SKODA Octavia III Hatchback (5E3, NL3, NR3) 1.2 TSI, SKODA Octavia III Hatchback (5E3, NL3, NR3) 1.2 TSI, SKODA Octavia III Hatchback (5E3, NL3, NR3) 1.4 TSI … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Poly V-Belt for Octavia III Hatchback (5E3, NL3, NR3) and other SKODA models
Alternative products

Combination spanner #16
Fender cover
Replacement: serpentine belt – SKODA OCTAVIA (5E3). AUTODOC experts recommend:
- All work should be done with the engine stopped.
Replacement: serpentine belt – SKODA OCTAVIA (5E3). Use the following procedure:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Lift the car using a jack or place it over an inspection pit.Step 4
Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16. - Step 5
Remove the V-ribbed belt. - Step 6
Return the tensioner pulley to its initial position.Replacement: serpentine belt – SKODA OCTAVIA (5E3). Tip:Check the condition of the tensioner pulley and idler pulley. Replace them if necessary. - Step 7
Install the V-ribbed belt.Replacement: serpentine belt – SKODA OCTAVIA (5E3). AUTODOC recommends:Make sure that the V-ribbed belt fits all pulleys snugly. - Step 8
Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the SKODA Octavia III Hatchback (5E3, NL3, NR3) model
Popular maintenance tutorials for Skoda Octavia 3
Complete guides for changing the Alternator belt on different SKODA OCTAVIA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your SKODA Octavia III Hatchback (5E3, NL3, NR3)
View more
Transform Your Old Engine Valve Cover: Quick Polishing Tips for a Shiny Finish | AUTODOC Tips
DIY jack restoration | AUTODOC tips
Top Automatic Transmission Blunders You Must Dodge | AUTODOC Insights
DIY engine block coffee table
Most commonly replaced car parts on SKODA OCTAVIA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME























