
Disclaimer
How to change serpentine belt on SKODA Octavia II Combi (1Z5) – replacement guide
downloads:
24
Views:
293

Recommended replacement interval for the part category Serpentine belt : 30000 km
Important!
This replacement procedure can be used for:
SKODA Octavia II Combi (1Z5) 1.6 MultiFuel, SKODA Octavia II Combi (1Z5) 2.0 FSI 4x4, SKODA Octavia II Combi (1Z5) 2.0 FSI, SKODA Octavia II Combi (1Z5) 1.6, SKODA Octavia II Combi (1Z5) 1.6 LPG … View more
The steps may slightly vary depending on the car design.
SKODA Octavia II Combi (1Z5) 1.6 MultiFuel, SKODA Octavia II Combi (1Z5) 2.0 FSI 4x4, SKODA Octavia II Combi (1Z5) 2.0 FSI, SKODA Octavia II Combi (1Z5) 1.6, SKODA Octavia II Combi (1Z5) 1.6 LPG … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Poly V-Belt for Octavia II Combi (1Z5) and other SKODA models
Serpentine belt
Alternative products

Combination spanner #16
Torx bit T25
Fender cover
Replacement: serpentine belt – SKODA OCTAVIA Combi (1Z5). AUTODOC experts recommend:
- All work should be done with the engine stopped.
Replacement: serpentine belt – SKODA OCTAVIA Combi (1Z5). Use the following procedure:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Lift the car using a jack or place it over an inspection pit.Step 4Unscrew and remove the wheel arch cover fasteners. Use Torx T25.
- Step 5Remove the wheel arch cover.
- Step 6Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
- Step 7Remove the V-ribbed belt.AUTODOC recommends:Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
- Step 8Return the tensioner pulley to its initial position.
- Step 9Install the V-ribbed belt.Replacement: serpentine belt – SKODA OCTAVIA Combi (1Z5). Professionals recommend:Make sure that the V-ribbed belt fits all pulleys snugly. Make sure that the V-ribbed belt is properly tensioned.
- Step 10Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
- Step 11Place the V-ribbed belt on the tensioner pulley.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the SKODA Octavia II Combi (1Z5) model
Popular maintenance tutorials for Skoda Octavia Mk2 Estate
Complete guides for changing the Alternator belt on different SKODA OCTAVIA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your SKODA Octavia II Combi (1Z5)
View more
- DIY car soundproofing | AUTODOC tips
- Engine Overheating? Replace Your Cooling Fan to Fix It
- #TPMS Explained: Why Your Light is On and How to Respond Safely
- Top 5 brake repair mistakes | AUTODOC tips
Most commonly replaced car parts on SKODA OCTAVIA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME