When to replace the Poly V-Belt on your SKODA OCTAVIA
Recommended replacement interval for the part category Serpentine belt : 30000 km
Important!
This replacement procedure can be used for:
SKODA Octavia IV Saloon (NX3) 1.6 SRE View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Poly V-Belt for Octavia IV Saloon (NX3) and other SKODA models
Tools
Replacement: serpentine belt – SKODA Octavia IV Limousine (NX3). List of the tools you'll need:
Combination spanner #16
Fender cover
Replacement: serpentine belt – SKODA Octavia IV Limousine (NX3). AUTODOC experts recommend:
  • All work should be done with the engine stopped.
Replacement: serpentine belt – SKODA Octavia IV Limousine (NX3). Use the following procedure:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Lift the car using a jack or place it over an inspection pit.
    Step 4
    How to change Poly V-Belt on SKODA Octavia IV Limousine (NX3) 2020 - free PDF and video manuals
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
  2. Step 5
    How to replace SKODA Octavia IV Saloon (NX3) 1.5 TSI 2021 Poly V-Belt - step-by-step manuals and video guides
    Remove the V-ribbed belt.
  3. Step 6
    SKODA Octavia IV Limousine (NX3) 2.0 TDi 2022 Poly V-Belt replacement: free workshop manuals
    Return the tensioner pulley to its initial position.
    Replacement: serpentine belt – SKODA Octavia IV Limousine (NX3). Tip:
    Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
  4. Step 7
    Changing Poly V-Belt on SKODA Octavia IV Saloon (NX3) 2.0 TDI 2023 by yourself
    Install the V-ribbed belt.
    Replacement: serpentine belt – SKODA Octavia IV Limousine (NX3). AUTODOC recommends:
    Make sure that the V-ribbed belt fits all pulleys snugly.
  5. Step 8
    How to remove SKODA OCTAVIA 2.0 TSI 2024 Poly V-Belt - online easy-to-follow instructions
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the SKODA Octavia IV Saloon (NX3) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
SKODA Octavia IV Saloon (NX3) Poly V-Belt replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY SKODA Octavia IV Saloon (NX3) Poly V-Belt replacement - online guide
Tips & tricks for your SKODA Octavia IV Saloon (NX3)
View more
  • How to change Alternator belt on SKODA Octavia IV Saloon (NX3) 1.0 TSI - replacement tricks
    How to choose the right engine oil for your car | AUTODOC
  • Changing Auxiliary belt SKODA Octavia IV Limousine (NX3) 1.5 TSI - Replacement Tips
    5 causes of turbocharger failure | AUTODOC tips
  • Maintenance Hacks - SKODA Octavia IV Saloon (NX3) 2.0 TDi Poly V-belt replacement guide
    How to paint a brake caliper | AUTODOC tips
  • Replace Drive belt on SKODA Octavia IV Limousine (NX3) - free video tips
    What to do if the TPMS light is on | AUTODOC tips