When to replace the Poly V-Belt on your SKODA OCTAVIA
Recommended replacement interval for the part category Serpentine belt : 30000 km
Important!
This replacement procedure can be used for:
SKODA OCTAVIA (1Z3) 1.6 LPG, SKODA OCTAVIA (1Z3) 1.6, SKODA OCTAVIA (1Z3) 2.0 FSI, SKODA OCTAVIA (1Z3) 1.6 MultiFuel View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Tools
Replacement: serpentine belt – SKODA OCTAVIA (1Z3). Tools you might need:
Combination spanner #16
Torx bit T25
Fender cover
Replacement: serpentine belt – SKODA OCTAVIA (1Z3). AUTODOC experts recommend:
  • All work should be done with the engine stopped.
Replacement: serpentine belt – SKODA OCTAVIA (1Z3). Use the following procedure:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Lift the car using a jack or place it over an inspection pit.
    Step 4
    How to change Poly V-Belt on Skoda Octavia Mk2 2004 - free PDF and video manuals
    Unscrew and remove the wheel arch cover fasteners. Use Torx T25.
  2. Step 5
    How to replace SKODA OCTAVIA (1Z3) 1.9 TDI 2005 Poly V-Belt - step-by-step manuals and video guides
    Remove the wheel arch cover.
  3. Step 6
    Skoda Octavia Mk2 1.6 2006 Poly V-Belt replacement: free workshop manuals
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
  4. Step 7
    Changing Poly V-Belt on SKODA OCTAVIA (1Z3) 2.0 TDI 16V 2007 by yourself
    Remove the V-ribbed belt.
    AUTODOC recommends:
    Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
  5. Step 8
    How to remove SKODA OCTAVIA 1.6 FSI 2008 Poly V-Belt - online easy-to-follow instructions
    Return the tensioner pulley to its initial position.
  6. Step 9
    How to replace Poly V-Belt on SKODA OCTAVIA (1Z3) 2009: download PDF manuals and video instructions
    Install the V-ribbed belt.
    Replacement: serpentine belt – SKODA OCTAVIA (1Z3). Professionals recommend:
    Make sure that the V-ribbed belt fits all pulleys snugly. Make sure that the V-ribbed belt is properly tensioned.
  7. Step 10
    How hard is it to do yourself: Poly V-Belt replacement on Skoda Octavia Mk2 2.0 TDI RS 2010 - download illustrated guide
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
  8. Step 11
    Need to know how to renew Poly V-Belt on SKODA OCTAVIA 2011? This free workshop manual will help you to do it yourself
    Place the V-ribbed belt on the tensioner pulley.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the SKODA Octavia II Hatchback (1Z3) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
SKODA OCTAVIA (1Z3) Poly V-Belt replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY SKODA OCTAVIA (1Z3) Poly V-Belt replacement - online guide
Tips & tricks for your SKODA OCTAVIA (1Z3)
View more
  • How to change Alternator belt on SKODA OCTAVIA (1Z3) 1.6 TDI - replacement tricks
    What to do if your car heater isn't working | AUTODOC tips
  • Changing Auxiliary belt Skoda Octavia Mk2 1.9 TDI - Replacement Tips
    How to unlock your car without a key | AUTODOC tips
  • Maintenance Hacks - SKODA OCTAVIA (1Z3) 1.6 Poly V-belt replacement guide
    Top 5 tips to prevent car rust | AUTODOC tips
  • Replace Drive belt on Skoda Octavia Mk2 - free video tips
    How to remove rust | AUTODOC tips