How to carry out replacement: Engine Mount 1.6 TDI Seat Toledo 4
Disclaimer
Change Seat Toledo 4 1.4 TSI Engine Mount yourself – manuals and video tutorials

How to change rear engine mounts on SEAT Toledo IV Hatchback (KG3) – replacement guide

downloads: 4
Views: 40
Download your free tutorial and fix SEAT Toledo IV Hatchback (KG3) 1.2 TSI problems yourself Download for free 1.24 MB Engine Mount for Seat Toledo 4 Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
SEAT Toledo IV Hatchback (KG3) 1.2 … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Engine Mount for Toledo IV Hatchback (KG3) and other SEAT models
Alternative products
How to change Engine mount on Seat Toledo 4 1.6 TDI – step-by-step instructions for straightforward car repair Engine mount
Tools
Replacement: engine mounts – SEAT TOLEDO IV (KG3). List of the tools you'll need:
Wire brush
WD-40 spray
Copper grease
Drive socket # 12
Drive socket # 16
Ratchet wrench
Torque wrench
Phillips screwdriver
Fender cover
Buy tools
Replacement: engine mounts – SEAT TOLEDO IV (KG3). AUTODOC recommends:
  • All work should be done with the engine stopped.
Replacement: engine mounts – SEAT TOLEDO IV (KG3). Use the following procedure:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Lift the car using a jack or place it over an inspection pit.
    Replacement: engine mounts – SEAT TOLEDO IV (KG3). Tip:
    The vehicle must be on even keel, and if it is at an angle, the drain plug must be at the lowest point.
    Step 4
    How to change Engine Mount on Seat Toledo 4 2012 - free PDF and video manuals
    Unscrew the fasteners of the lower sound insulation. Use a drive socket #12. Use a Phillips screwdriver.
  2. Step 5
    How to replace SEAT Toledo IV Hatchback (KG3) 1.6 TDI 2013 Engine Mount - step-by-step manuals and video guides
    Remove the lower sound insulation.
  3. Step 6
    Seat Toledo 4 1.6 (CFNA) 2014 Engine Mount replacement: free workshop manuals
    Clean the engine mount fasteners. Use a wire brush. Use WD-40 spray.
  4. Step 7
    Changing Engine Mount on SEAT Toledo IV Hatchback (KG3) 1.4 TSI 2015 by yourself
    Unscrew the fastener connecting the engine mount to the gearbox housing. Use a drive socket #16. Use a ratchet wrench.
  5. Step 8
    How to remove SEAT TOLEDO 1.4 TDI 2016 Engine Mount - online easy-to-follow instructions
    Unscrew the engine mount fastener that connects it to the subframe. Use a drive socket #16. Use a ratchet wrench.
  6. Step 9
    How to replace Engine Mount on SEAT Toledo IV Hatchback (KG3) 2017: download PDF manuals and video instructions
    Remove the engine mount.
    Replacement: engine mounts – SEAT TOLEDO IV (KG3). AUTODOC experts recommend:
    Carefully check the other engine mounts and replace them if necessary.
  7. Step 10
    How hard is it to do yourself: Engine Mount replacement on Seat Toledo 4 1.6 (CFNA) 2018 - download illustrated guide
    Install the engine mount to its mounting seat.
  8. Step 11
    Need to know how to renew Engine Mount on SEAT TOLEDO 2019? This free workshop manual will help you to do it yourself
    Screw in the engine mount fastener that connects it to the subframe. Use a drive socket #16.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the SEAT Toledo IV Hatchback (KG3) model

Seat Toledo 4 tyre size

Popular maintenance tutorials for Seat Toledo 4

More manuals for Seat Toledo 4

Complete guides for changing the Engine mounts on different SEAT TOLEDO models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY SEAT Toledo IV Hatchback (KG3) Engine Mount replacement - online guide
Tips & tricks for your SEAT Toledo IV Hatchback (KG3)
View more
  • How to change Engine mounts on SEAT Toledo IV Hatchback (KG3) 1.2 TSI - replacement tricks
    #DIY Tips for Fixing Your Car's Air Conditioning Issues | Don't Wait for Costly Repairs!
    7K views
    Published on: 05/08/2021
  • Changing Engine mounting Seat Toledo 4 1.6 TDI - Replacement Tips
    TOP 6 WD-40 lifehacks | AUTODOC tips
    13K views
    Published on: 15/07/2021
  • Maintenance Hacks - SEAT Toledo IV Hatchback (KG3) 1.6 (CFNA) Motor mounts replacement guide
    5 possible reasons why your car heater isn't working
    6K views
    Published on: 21/11/2024
  • Replace Motor mount on Seat Toledo 4 - free video tips
    Extend your engine's life: Avoid these 3 damaging factors | AUTODOC tips
    9K views
    Published on: 07/10/2021

Most commonly replaced car parts on SEAT TOLEDO

Professional manuals for the most common SEAT models

Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
SEAT Toledo IV Hatchback (KG3) Engine Mount replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME