
Disclaimer
How to change serpentine belt on RENAULT GRAND SCÉNIC II (JM0/1_) – replacement guide
downloads:
3
Views:
25

Recommended replacement interval for the part category Serpentine belt : 5 year / 120000 km
Important!
This replacement procedure can be used for:
RENAULT GRAND SCÉNIC II (JM0/1_) 2.0, RENAULT GRAND SCÉNIC II (JM0/1_) 1.9 dCi (JM0G, JM12, JM1G, JM2C), RENAULT GRAND SCÉNIC II (JM0/1_) 2.0, RENAULT GRAND SCÉNIC II (JM0/1_) 1.9 dCi (JM15), RENAULT GRAND SCÉNIC II (JM0/1_) 1.9 dCi (JM14), RENAULT GRAND SCÉNIC II (JM0/1_) 1.9 dCi … View more
The steps may slightly vary depending on the car design.
RENAULT GRAND SCÉNIC II (JM0/1_) 2.0, RENAULT GRAND SCÉNIC II (JM0/1_) 1.9 dCi (JM0G, JM12, JM1G, JM2C), RENAULT GRAND SCÉNIC II (JM0/1_) 2.0, RENAULT GRAND SCÉNIC II (JM0/1_) 1.9 dCi (JM15), RENAULT GRAND SCÉNIC II (JM0/1_) 1.9 dCi (JM14), RENAULT GRAND SCÉNIC II (JM0/1_) 1.9 dCi … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Poly V-Belt for GRAND SCÉNIC II (JM0/1_) and other RENAULT models
Serpentine belt
Alternative products

Wire brush
Copper grease
Drive socket # 13
Drive socket # 16
Torx bit T25
Wheel impact socket #19
Ratchet wrench
Tap wrench
Ear clamp pliers
Fender cover
Wheel chock
Replacement: serpentine belt – RENAULT GRAND SCÉNIC II (JM0/1_). AUTODOC recommends:
- All work should be done with the engine stopped.
Replacement: serpentine belt – RENAULT GRAND SCÉNIC II (JM0/1_). Take the following steps:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Secure the wheels with chocks.
- Step 4Loosen the wheel mounting bolts. Use wheel impact socket #19.
- Step 5Lift the car using a jack or place it over an inspection pit.Step 6Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. RENAULT GRAND SCÉNIC II (JM0/1_)
- Step 7Remove the wheel.
- Step 8Unscrew and remove the wheel arch cover fasteners. Use ear clamp pliers. Use Torx T25. Use a ratchet wrench.
- Step 9Remove the wheel arch cover.
- Step 10Unscrew the fasteners connecting the bumper reinforcement bar to the subframe. Use a drive socket #13.
- Step 11Pull aside the V-ribbed belt tensioner pulley. Use a drive socket #16. Use a tap wrench.
- Step 12Remove the V-ribbed belt.
- Step 13Return the tensioner pulley to its initial position.Replacement: serpentine belt – RENAULT GRAND SCÉNIC II (JM0/1_). AUTODOC experts recommend:Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.Step 14Install the V-ribbed belt.Replacement: serpentine belt – RENAULT GRAND SCÉNIC II (JM0/1_). Tip from AUTODOC:Make sure that the V-ribbed belt fits all pulleys snugly.
- Step 15Pull aside the V-ribbed belt tensioner pulley. Use a drive socket #16. Use a tap wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Grand Scénic II (JM) model
Popular maintenance tutorials for Renault Grand Scénic II
Complete guides for changing the Alternator belt on different RENAULT GRAND SCÉNIC models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT GRAND SCÉNIC II (JM0/1_)
View more
- Coolant comparison test | AUTODOC
- Prevent Engine Damage: How to Identify Rocker Cover Gasket Issues and Proper Replacement | AUTODOC
- How do EGR valves work? | AUTODOC
- Easy Steps to Paint Brake Calipers Without Special Skills or High Costs
Most commonly replaced car parts on RENAULT GRAND SCÉNIC
Time to replace parts? Get even better deals in our Shop app.

SCAN ME