When to replace the Poly V-Belt on your RENAULT CLIO
Recommended replacement interval for the part category Serpentine belt : 30000 km
Important!
This replacement procedure can be used for:
RENAULT Clio III Van (SB_, SR_) 1.5 dCi (SR1H), RENAULT Clio III Van (SB_, SR_) 1.5 dCi View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Poly V-Belt for Clio III Van (SB_, SR_) and other RENAULT models
Alternative products
How to change Serpentine belt on Renault Clio 3 Van 1.5 dCi – step-by-step instructions for straightforward car repair Serpentine belt
Tools
Replacement: serpentine belt – RENAULT CLIO III Box (SB_, SR_). Tools you need:
Torque wrench
Combination spanner #10
Combination spanner #16
Drive socket # 13
Wheel impact socket #17
Ratchet wrench
Clip removal tool
Fender cover
Wheel chock
Replacement: serpentine belt – RENAULT CLIO III Box (SB_, SR_). AUTODOC recommends:
  • All work should be done with the engine stopped.
Replacement: serpentine belt – RENAULT CLIO III Box (SB_, SR_). Use the following procedure:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Poly V-Belt on Renault Clio 3 Van 2005 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 4
    How to replace RENAULT Clio III Van (SB_, SR_) 1.5 dCi 2006 Poly V-Belt - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 5
    Raise the front of the car and secure on supports.
    Step 6
    Renault Clio 3 Van 1.2 (SR0J) 2007 Poly V-Belt replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. RENAULT CLIO III Box (SB_, SR_)
  4. Step 7
    Changing Poly V-Belt on RENAULT Clio III Van (SB_, SR_) 1.5 dCi (SR1H) 2008 by yourself
    Remove the wheel.
  5. Step 8
    How to remove RENAULT CLIO 1.2 Hi-Flex (SR1U) 2009 Poly V-Belt - online easy-to-follow instructions
    Remove the wheel arch cover. Use a clip removal tool.
  6. Step 9
    How to replace Poly V-Belt on RENAULT Clio III Van (SB_, SR_) 2010: download PDF manuals and video instructions
    Unscrew the fuel filter bracket fixing bolts. Use a drive socket #13. Use a ratchet wrench.
  7. Step 10
    How hard is it to do yourself: Poly V-Belt replacement on Renault Clio 3 Van 1.2 (SR0J) 2011 - download illustrated guide
    Remove the fuel filter fastening bracket.
  8. Step 11
    Need to know how to renew Poly V-Belt on RENAULT CLIO 2012? This free workshop manual will help you to do it yourself
    Unscrew the fuel filter bracket fixing bolts. Use a combination spanner #10.
  9. Step 12
    Changing of Poly V-Belt on Renault Clio 3 Van 2013 won't be an issue if you follow this illustrated step-by-step guide
    Remove the fuel filter fastening bracket.
  10. Step 13
    RENAULT CLIO 1.5 dCi (SR1H) Poly V-Belt replacement: online guides and video tutorials
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
  11. Step 14
    Replacing Poly V-Belt on Renault Clio 3 Van 2015 1.5 dCi by yourself
    Remove the V-ribbed belt.
  12. Step 15
    Return the tensioner pulley to its initial position.
    Replacement: serpentine belt – RENAULT CLIO III Box (SB_, SR_). Tip:
    Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
    Step 16
    Clio III Van (SB_, SR_) 1.2 Hi-Flex (SR1U) 2016 Poly V-Belt DIY replacement workshop manual
    Install the V-ribbed belt.
    AUTODOC recommends:
    Make sure that the V-ribbed belt fits all pulleys snugly.
  13. Step 17
    How to change Poly V-Belt on RENAULT Clio III Van (SB_, SR_) 2017 - tips and tricks
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
  14. Step 18
    Step-by-step recommendations for DIY replacement Renault Clio 3 Van 2018 1.2 Hi-Flex (SR1U) Poly V-Belt
    Place the V-ribbed belt on the tensioner pulley.
  15. Step 19
    DIY replacement of Poly V-Belt on RENAULT Clio III Van (SB_, SR_) 1.2 (SR0P) 2019 is not an issue anymore with our step-by-step tutorial
    Return the tensioner pulley to its initial position.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the RENAULT Clio III Van (SB_, SR_) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY RENAULT Clio III Van (SB_, SR_) Poly V-Belt replacement - online guide
Tips & tricks for your RENAULT Clio III Van (SB_, SR_)
View more
  • How to change Alternator belt on RENAULT Clio III Van (SB_, SR_) 1.2 (SR0P) - replacement tricks
    TOP 5 mistakes when replacing shock absorbers | AUTODOC tips
  • Changing Auxiliary belt Renault Clio 3 Van 1.5 dCi - Replacement Tips
    Petrol or diesel: The engine showdown! | AUTODOC
  • Maintenance Hacks - RENAULT Clio III Van (SB_, SR_) 1.2 (SR0J) Poly V-belt replacement guide
    Unveiling the secrets: Detecting vacuum leaks with a Smoke Machine | AUTODOC
  • Replace Drive belt on Renault Clio 3 Van - free video tips
    How to Fix P0401 ✅ error code Insufficient EGR flow
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
RENAULT Clio III Van (SB_, SR_) Poly V-Belt replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME