When to replace the Poly V-Belt on your CITROËN XSARA
Recommended replacement interval for the part category Serpentine belt : 30000 km
Important!
This replacement procedure can be used for:
CITROËN XSARA (N1) 2.0 HDi 90, CITROËN XSARA (N1) 2.0 HDi 109 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Poly V-Belt for XSARA (N1) and other CITROËN models
How to change Serpentine belt on Citroën Xsara N1 2.0 HDi 90 – step-by-step instructions for straightforward car repair
Serpentine belt
How to change V-Ribbed Belt Set on Citroën Xsara N1 2.0 HDi 90 – step-by-step instructions for straightforward car repair
V-Ribbed Belt Set
Tools
Replacement: serpentine belt – CITROËN XSARA (N1). Tools you'll need:
Combination spanner #16
Fender cover
Replacement: serpentine belt – CITROËN XSARA (N1). Professionals recommend:
  • All work should be done with the engine stopped.
Replacement: serpentine belt – CITROËN XSARA (N1). Take the following steps:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Lift the car using a jack or place it over an inspection pit.
    Step 4
    How to change Poly V-Belt on Citroën Xsara N1 1997 - free PDF and video manuals
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
  2. Step 5
    How to replace CITROËN XSARA (N1) 2.0 HDi 90 1998 Poly V-Belt - step-by-step manuals and video guides
    Remove the V-ribbed belt.
  3. Step 6
    Citroën Xsara N1 1.6 16V 1999 Poly V-Belt replacement: free workshop manuals
    Return the tensioner pulley to its initial position.
    Replacement: serpentine belt – CITROËN XSARA (N1). Tip from AUTODOC:
    Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
  4. Step 7
    Install the V-ribbed belt.
    Replacement: serpentine belt – CITROËN XSARA (N1). AUTODOC recommends:
    Make sure that the V-ribbed belt fits all pulleys snugly.
    Step 8
    Changing Poly V-Belt on CITROËN XSARA (N1) 1.9 TD 2000 by yourself
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
CITROËN XSARA (N1) Poly V-Belt replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY CITROËN XSARA (N1) Poly V-Belt replacement - online guide
Tips & tricks for your CITROËN XSARA (N1)
View more
  • How to change Alternator belt on CITROËN XSARA (N1) 1.4 i - replacement tricks
    DIY jack restoration | AUTODOC tips
  • Changing Auxiliary belt Citroën Xsara N1 2.0 HDi 90 - Replacement Tips
    How to prevent car windows from fogging up | AUTODOC tips
  • Maintenance Hacks - CITROËN XSARA (N1) 1.6 16V Poly V-belt replacement guide
    Why do your brakes squeak? | AUTODOC tips
  • Replace Drive belt on Citroën Xsara N1 - free video tips
    DIY starter repair | AUTODOC tips