When to replace the Poly V-Belt on your CITROËN BERLINGO
Recommended replacement interval for the part category Serpentine belt : 1 year / 20000 km
Important!
This replacement procedure can be used for:
CITROËN Berlingo / Berlingo First (MF, GJK, GFK) 2.0 HDI 90 (MFRHY) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Poly V-Belt for Berlingo / Berlingo First (MF, GJK, GFK) and other CITROËN models
Tools
Replacement: serpentine belt – CITROËN BERLINGO (MF). Tools you'll need:
Combination spanner #16
Fender cover
Replacement: serpentine belt – CITROËN BERLINGO (MF). Professionals recommend:
  • All work should be done with the engine stopped.
Replacement: serpentine belt – CITROËN BERLINGO (MF). Take the following steps:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Lift the car using a jack or place it over an inspection pit.
    Step 4
    How to change Poly V-Belt on Citroen Berlingo MF 1996 - free PDF and video manuals
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
  2. Step 5
    How to replace CITROËN Berlingo / Berlingo First (MF, GJK, GFK) 2.0 HDI 90 1997 Poly V-Belt - step-by-step manuals and video guides
    Remove the V-ribbed belt.
  3. Step 6
    Citroen Berlingo MF 1.9 D 1998 Poly V-Belt replacement: free workshop manuals
    Return the tensioner pulley to its initial position.
    Replacement: serpentine belt – CITROËN BERLINGO (MF). Tip from AUTODOC:
    Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
  4. Step 7
    Install the V-ribbed belt.
    Replacement: serpentine belt – CITROËN BERLINGO (MF). AUTODOC recommends:
    Make sure that the V-ribbed belt fits all pulleys snugly.
    Step 8
    Changing Poly V-Belt on CITROËN Berlingo / Berlingo First (MF, GJK, GFK) 1.4 i (MFKFX, MFKFW, GJKFWB, GJKFWC, GFKFWC) 1999 by yourself
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the CITROËN Berlingo / Berlingo First I (MF, GJK, GFK) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
CITROËN Berlingo / Berlingo First (MF, GJK, GFK) Poly V-Belt replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY CITROËN Berlingo / Berlingo First (MF, GJK, GFK) Poly V-Belt replacement - online guide
Tips & tricks for your CITROËN Berlingo / Berlingo First (MF, GJK, GFK)
View more
  • How to change Alternator belt on CITROËN Berlingo / Berlingo First (MF, GJK, GFK) 1.6 16V - replacement tricks
    3 things that cause engine damage | AUTODOC tips
  • Changing Auxiliary belt Citroen Berlingo MF 2.0 HDI 90 - Replacement Tips
    How to restore a damaged thread | AUTODOC tips
  • Maintenance Hacks - CITROËN Berlingo / Berlingo First (MF, GJK, GFK) 1.9 D Poly V-belt replacement guide
    How to check your head gasket | AUTODOC
  • Replace Drive belt on Citroen Berlingo MF - free video tips
    How to remove scratches from a car | AUTODOC tips