How to carry out replacement: Engine Mount 330Ci BMW 3 Convertible (E46)
Disclaimer
Change BMW 3 Convertible (E46) 330Cd 3.0 Engine Mount yourself – manuals and video tutorials

How to change right engine mounts on BMW 3 Convertible (E46) – replacement guide

downloads: 1
Views: 21
Download your free tutorial and fix BMW 3 Convertible (E46) 318Ci problems yourself Download for free 2.52 MB Engine Mount for BMW 3 Convertible (E46) Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
BMW 3 Convertible (E46) 330 Cd … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Engine Mount for 3 Convertible (E46) and other BMW models
Alternative products
How to change Engine mount on BMW 3 Convertible (E46) 330Ci – step-by-step instructions for straightforward car repair Engine mount
Tools
Replacement: engine mounts – BMW 3 Convertible (E46). Tools you need:
Wire brush
WD-40 spray
Copper grease
HEX bit No.H5.
Drive socket # 16
Wheel impact socket #17
Ratchet wrench
Torque wrench
Crow bar
Fender cover
Hydraulic transmission jack
Wheel chock
Buy tools
Replacement: engine mounts – BMW 3 Convertible (E46). AUTODOC experts recommend:
  • All work should be done with the engine stopped.
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Engine Mount on BMW 3 Convertible (E46) 2000 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 4
    How to replace BMW 3 Convertible (E46) 330Ci 2001 Engine Mount - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 5
    Lift the car using a jack or place it over an inspection pit.
    Step 6
    BMW 3 Convertible (E46) 320Ci 2.2 2002 Engine Mount replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: engine mounts – BMW 3 Convertible (E46). AUTODOC recommends:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 7
    Changing Engine Mount on BMW 3 Convertible (E46) 318Ci 2.0 2003 by yourself
    Remove the wheel.
  5. Step 8
    How to remove BMW 3 SERIES 323Ci 2.5 2004 Engine Mount - online easy-to-follow instructions
    Detach the vacuum hose from the engine mount.
  6. Step 9
    How to replace Engine Mount on BMW 3 Convertible (E46) 2005: download PDF manuals and video instructions
    Treat the lower fastener of the engine mount. Use WD-40 spray.
  7. Step 10
    How hard is it to do yourself: Engine Mount replacement on BMW 3 Convertible (E46) 320Cd 2.0 2006 - download illustrated guide
    Unscrew the lower fastener of the engine mount. Use a drive socket #16.
  8. Step 11
    Need to know how to renew Engine Mount on BMW 3 SERIES 2007? This free workshop manual will help you to do it yourself
    Loosen the air intake fastening. Use HEX No.H5. Use a ratchet wrench.
  9. Step 12
    Changing of Engine Mount on BMW 3 Convertible (E46) 2000 won't be an issue if you follow this illustrated step-by-step guide
    Detach the air duct housing from the air filter housing.
  10. Step 13
    BMW 3 SERIES 330Cd 3.0 Engine Mount replacement: online guides and video tutorials
    Unscrew the upper fastener of the engine mount. Use a drive socket #16. Use a ratchet wrench.
  11. Step 14
    Replacing Engine Mount on BMW 3 Convertible (E46) 2002 330Ci by yourself
    Support the engine in the oil pan area. Use a hydraulic transmission jack.
    Replacement: engine mounts – BMW 3 Convertible (E46). Tip:
    Make sure that the engine is supported.
  12. Step 15
    3 Convertible (E46) 323Ci 2.5 2003 Engine Mount DIY replacement workshop manual
    Remove the engine mount. Use a crowbar.
    Replacement: engine mounts – BMW 3 Convertible (E46). AUTODOC experts recommend:
    Carefully check the other engine mounts and replace them if necessary.
  13. Step 16
    How to change Engine Mount on BMW 3 Convertible (E46) 2004 - tips and tricks
    Install the engine mount to its mounting seat. Use a crowbar.
  14. Step 17
    Step-by-step recommendations for DIY replacement BMW 3 Convertible (E46) 2005 323Ci 2.5 Engine Mount
    Remove the support from under the engine.
    AUTODOC recommends:
    Replacement: engine mounts – BMW 3 Convertible (E46). Lower the transmission jack smoothly, without jerks, to avoid damaging components and mechanisms.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the BMW 3 Convertible (E46) model

BMW 3 Convertible (E46) tyre size

Popular maintenance tutorials for BMW 3 Convertible (E46)

More manuals for BMW 3 Convertible (E46)

Complete guides for changing the Engine mounts on different BMW 3 SERIES models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY BMW 3 Convertible (E46) Engine Mount replacement - online guide
Tips & tricks for your BMW 3 Convertible (E46)
View more
  • How to change Engine mounts on BMW 3 Convertible (E46) 325Ci - replacement tricks
    Top 5 possible reasons your car is shaking or vibrating
    6K views
    Published on: 14/02/2025
  • Changing Engine mounting BMW 3 Convertible (E46) 330Ci - Replacement Tips
    How to Order Car Parts Online: Avoid These 5 Common Pitfalls
    4K views
    Published on: 10/03/2022
  • Maintenance Hacks - BMW 3 Convertible (E46) 320Ci 2.2 Motor mounts replacement guide
    5 mistakes when replacing consumables
    5K views
    Published on: 06/02/2025
  • Replace Motor mount on BMW 3 Convertible (E46) - free video tips
    Understanding Airbag Light Warnings | Essential Tips for Car Safety
    6K views
    Published on: 10/04/2023

Most commonly replaced car parts on BMW 3 SERIES

Professional manuals for the most common BMW models

Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
BMW 3 Convertible (E46) Engine Mount replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME