Disclaimer
How to change serpentine belt on BMW 3 Convertible (E46) – replacement guide
downloads:
0
Views:
20
Recommended replacement interval for the part category Serpentine belt : 30000 km
Important!
This replacement procedure can be used for:
BMW 3 Convertible (E46) 323 Ci, BMW 3 Convertible (E46) 325Ci, BMW 3 Convertible (E46) 320 Ci, BMW 3 Convertible (E46) 330Ci, BMW 3 Convertible (E46) 323 Ci … View more
The steps may slightly vary depending on the car design.
BMW 3 Convertible (E46) 323 Ci, BMW 3 Convertible (E46) 325Ci, BMW 3 Convertible (E46) 320 Ci, BMW 3 Convertible (E46) 330Ci, BMW 3 Convertible (E46) 323 Ci … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Poly V-Belt for 3 Convertible (E46) and other BMW models
Alternative products

Combination spanner #13
Combination spanner #32
Drive socket # 16
Ratchet wrench
Torque wrench
Fender cover
Replacement: serpentine belt – BMW 3 Convertible (E46). AUTODOC recommends:
- All work should be done with the engine stopped.
Replacement: serpentine belt – BMW 3 Convertible (E46). Use the following procedure:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Unscrew the fastener of the viscous fan clutch. Use a combination spanner #32. - Step 4
Remove the fan shroud seal. - Step 5
Unscrew and remove the viscous fan clutch. - Step 6
Remove the fan shroud. - Step 7
Pull aside the AC compressor belt tensioner pulley. Use a combination spanner #13. - Step 8
Remove the AC compressor belt. - Step 9
Remove the tensioner pulley cap. - Step 10
Pull aside the V-ribbed belt tensioner pulley. Use a drive socket #16. Use a ratchet wrench. - Step 11
Remove the V-ribbed belt. - Step 12
Return the tensioner pulley to its initial position. Use a drive socket #16. Use a ratchet wrench.Replacement: serpentine belt – BMW 3 Convertible (E46). Professionals recommend:Check the condition of the tensioner pulley and idler pulley. Replace them if necessary. - Step 13
Pull aside the V-ribbed belt tensioner pulley. Use a drive socket #16. Use a ratchet wrench. - Step 14
Install the V-ribbed belt.Replacement: serpentine belt – BMW 3 Convertible (E46). Tip from AUTODOC:Make sure that the V-ribbed belt fits all pulleys snugly.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the BMW 3 Convertible (E46) model
Popular maintenance tutorials for BMW 3 Convertible (E46)
Complete guides for changing the Alternator belt on different BMW 3 SERIES models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your BMW 3 Convertible (E46)
View more
How to Fix a Squealing Belt: Causes & Solutions | AUTODOC Expert Tips
5 most common causes of oil leaks | AUTODOC tips
Fuse Replacement Made Simple: Step-by-Step Guide | AUTODOC
Why Checking Your Oil is Crucial for Engine Performance
Most commonly replaced car parts on BMW 3 SERIES
Time to replace parts? Get even better deals in our Shop app.

SCAN ME




























