How to carry out replacement: Wheel Bearing 1.6 TDI Seat Toledo 4
Disclaimer
Change Seat Toledo 4 1.4 TSI Wheel Bearing yourself – manuals and video tutorials

How to change rear wheel bearing on SEAT Toledo IV Hatchback (KG3) – replacement guide

downloads: 1
Views: 14
Download your free tutorial and fix SEAT Toledo IV Hatchback (KG3) 1.2 TSI problems yourself Download for free 2.06 MB Wheel Bearing for Seat Toledo 4 Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
SEAT Toledo IV Hatchback (KG3) 1.2 … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Wheel Bearing for Toledo IV Hatchback (KG3) and other SEAT models
Alternative products
How to change Wheel bearing kit on Seat Toledo 4 1.6 TDI – step-by-step instructions for straightforward car repair Wheel bearing kit
Tools
Replacement: wheel bearing – SEAT TOLEDO IV (KG3). Tools you might need:
Wire brush
WD-40 spray
Brake cleaner
Torx bit T30
Combination spanner #13
Combination spanner #15
Drive socket # 13
Torque wrench
Copper grease
Wheel impact socket #17
Flat chisel
Hammer
3-Arm Gear Puller
12-point socket # 32
Rubber mallet
Crow bar
Wheel chock
Buy tools
Replacement: wheel bearing – SEAT TOLEDO IV (KG3). AUTODOC experts recommend:
  • The replacement procedure is identical for the left and right wheel hubs on the same axle.
  • All work should be done with the engine stopped.
Replacement: wheel bearing – SEAT TOLEDO IV (KG3). Use the following procedure:
  1. Step 1
    How to change Wheel Bearing on Seat Toledo 4 2012 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace SEAT Toledo IV Hatchback (KG3) 1.6 TDI 2013 Wheel Bearing - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    Seat Toledo 4 1.6 (CFNA) 2014 Wheel Bearing replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. SEAT TOLEDO IV (KG3)
  4. Step 5
    Changing Wheel Bearing on SEAT Toledo IV Hatchback (KG3) 1.4 TSI 2015 by yourself
    Remove the wheel.
  5. Step 6
    How to remove SEAT TOLEDO 1.4 TDI 2016 Wheel Bearing - online easy-to-follow instructions
    Spread the brake pads. Use a crowbar.
  6. Step 7
    How to replace Wheel Bearing on SEAT Toledo IV Hatchback (KG3) 2017: download PDF manuals and video instructions
    Unscrew the brake caliper fastening. Use a combination spanner #13. Use a combination spanner #15.
  7. Step 8
    How hard is it to do yourself: Wheel Bearing replacement on Seat Toledo 4 1.6 (CFNA) 2018 - download illustrated guide
    Remove the brake caliper.
    Replacement: wheel bearing – SEAT TOLEDO IV (KG3). Tip:
    Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur.
  8. Step 9
    Need to know how to renew Wheel Bearing on SEAT TOLEDO 2019? This free workshop manual will help you to do it yourself
    Remove the brake pads.
  9. Step 10
    Changing of Wheel Bearing on Seat Toledo 4 2012 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the brake disc mounting bolts and remove it. Use Torx T30.
    Replacement: wheel bearing – SEAT TOLEDO IV (KG3). AUTODOC recommends:
    If necessary, use a rubber mallet.
  10. Step 11
    SEAT TOLEDO 1.4 TSI Wheel Bearing replacement: online guides and video tutorials
    Pry up and remove the wheel hub cap. Use a crowbar.
    Replacement: wheel bearing – SEAT TOLEDO IV (KG3). Tip from AUTODOC experts:
    If necessary, use a flat chisel and a hammer.
  11. Step 12
    Replacing Wheel Bearing on Seat Toledo 4 2014 1.6 TDI by yourself
    Unscrew the wheel hub fastening nut. Use drive 12-point socket #32.
  12. Step 13
    Toledo IV Hatchback (KG3) 1.4 TDI 2015 Wheel Bearing DIY replacement workshop manual
    Clean the hub. Use WD-40 spray.
  13. Step 14
    How to change Wheel Bearing on SEAT Toledo IV Hatchback (KG3) 2016 - tips and tricks
    Remove the hub and the bearing together, since they are a sealed unit. Use 3-Arm Gear Puller.
  14. Step 15
    Step-by-step recommendations for DIY replacement Seat Toledo 4 2017 1.4 TDI Wheel Bearing
    Clean the guiding part of the stub axle. Use a wire brush.
    Replacement: wheel bearing – SEAT TOLEDO IV (KG3). Tip from AUTODOC:
    Be careful to avoid damaging the guiding part of the stub axle.
  15. Step 16
    DIY replacement of Wheel Bearing on SEAT Toledo IV Hatchback (KG3) 1.2 TSI 2018 is not an issue anymore with our step-by-step tutorial
    Clean the hub bearing mounting seat. Use a wire brush. Use WD-40 spray.
  16. Step 17
    How to change Wheel Bearing on Seat Toledo 4 2012 - free PDF and video manuals
    Apply special grease to the bearing assembly mounting seat.
  17. Step 18
    How to replace SEAT Toledo IV Hatchback (KG3) 1.6 TDI 2013 Wheel Bearing - step-by-step manuals and video guides
    Install the new wheel hub with a bearing.
  18. Step 19
    Seat Toledo 4 1.6 (CFNA) 2014 Wheel Bearing replacement: free workshop manuals
    Move the hub as far as it can go.
  19. Step 20
    Changing Wheel Bearing on SEAT Toledo IV Hatchback (KG3) 1.4 TSI 2015 by yourself
    Screw the wheel hub lock nut.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the SEAT Toledo IV Hatchback (KG3) model

Seat Toledo 4 tyre size

Popular maintenance tutorials for Seat Toledo 4

More manuals for Seat Toledo 4

Complete guides for changing the Wheel bearings on different SEAT TOLEDO models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY SEAT Toledo IV Hatchback (KG3) Wheel Bearing replacement - online guide
Tips & tricks for your SEAT Toledo IV Hatchback (KG3)
View more
  • How to change Wheel bearings on SEAT Toledo IV Hatchback (KG3) 1.2 TSI - replacement tricks
    Stop Rust Before It Starts: Top 5 Tips for Car Body Protection | AUTODOC Insights
    7K views
    Published on: 27/07/2023
  • Changing Hub bearing Seat Toledo 4 1.6 TDI - Replacement Tips
    How to Swap an M50 Engine in a BMW E30 Turbo | AUTODOC Project
    2K views
    Published on: 15/02/2021
  • Maintenance Hacks - SEAT Toledo IV Hatchback (KG3) 1.6 (CFNA) Wheel bearing kit replacement guide
    The Ultimate Guide to Engine Bay Cleaning | AUTODOC
    6K views
    Published on: 11/09/2020
  • Replace Wheel hub bearing on Seat Toledo 4 - free video tips
    When, why, and how to change engine oil | AUTODOC tips
    6K views
    Published on: 16/08/2024

Most commonly replaced car parts on SEAT TOLEDO

Professional manuals for the most common SEAT models

Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
SEAT Toledo IV Hatchback (KG3) Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME