How to carry out replacement: Anti Roll Bar Links 1.6 TDI Seat Toledo 4
Disclaimer
Change Seat Toledo 4 1.4 TSI Anti Roll Bar Links yourself – manuals and video tutorials

How to change front anti roll bar links on SEAT Toledo IV Hatchback (KG3) – replacement guide

downloads: 1
Views: 9
Download your free tutorial and fix SEAT Toledo IV Hatchback (KG3) 1.2 TSI problems yourself Download for free 1.25 MB Anti Roll Bar Links for Seat Toledo 4 Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
SEAT Toledo IV Hatchback (KG3) 1.2, SEAT Toledo IV Hatchback (KG3) 1.2 TSI, SEAT Toledo IV Hatchback (KG3) 1.2 TSI, SEAT Toledo IV Hatchback (KG3) 1.4 TSI, SEAT Toledo IV Hatchback (KG3) 1.6 TDI, SEAT Toledo IV Hatchback (KG3) 1.6, SEAT Toledo IV Hatchback (KG3) 1.6 TDI, SEAT Toledo IV Hatchback (KG3) 1.2 TSI, SEAT Toledo IV Hatchback (KG3) 1.2 TSI, SEAT Toledo IV Hatchback (KG3) 1.4 TSI, SEAT Toledo IV Hatchback (KG3) 1.4 TDI, SEAT Toledo IV Hatchback (KG3) 1.6 TDI, SEAT Toledo IV Hatchback (KG3) 1.6, SEAT Toledo IV Hatchback (KG3) 1.0 TSI, SEAT Toledo IV Hatchback (KG3) 1.0 TSI … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for Toledo IV Hatchback (KG3) and other SEAT models
Alternative products
How to change Anti-roll bar link on Seat Toledo 4 1.6 TDI – step-by-step instructions for straightforward car repair Anti-roll bar link
Tools
Replacement: anti roll bar links – SEAT TOLEDO IV (KG3). Tools you need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #17
Drive socket # 16
Drive socket # 17
HEX bit No.H5.
Wheel impact socket #17
Ratchet wrench
Torque wrench
Wheel chock
Buy tools
Replacement: anti roll bar links – SEAT TOLEDO IV (KG3). AUTODOC experts recommend:
  • Replace the stabiliser links on SEAT TOLEDO IV (KG3) in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • All work should be done with the engine stopped.
Replacement: anti roll bar links – SEAT TOLEDO IV (KG3). Recommended sequence of steps:
  1. Step 1
    How to change Anti Roll Bar Links on Seat Toledo 4 2012 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace SEAT Toledo IV Hatchback (KG3) 1.6 TDI 2013 Anti Roll Bar Links - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    Seat Toledo 4 1.6 (CFNA) 2014 Anti Roll Bar Links replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. SEAT TOLEDO IV (KG3)
  4. Step 5
    Changing Anti Roll Bar Links on SEAT Toledo IV Hatchback (KG3) 1.4 TSI 2015 by yourself
    Remove the wheel.
  5. Step 6
    How to remove SEAT TOLEDO 1.4 TDI 2016 Anti Roll Bar Links - online easy-to-follow instructions
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Anti Roll Bar Links on SEAT Toledo IV Hatchback (KG3) 2017: download PDF manuals and video instructions
    Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a drive socket #16. Use a ratchet wrench.
  7. Step 8
    How hard is it to do yourself: Anti Roll Bar Links replacement on Seat Toledo 4 1.6 (CFNA) 2018 - download illustrated guide
    Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #16. Use a ratchet wrench.
  8. Step 9
    Need to know how to renew Anti Roll Bar Links on SEAT TOLEDO 2019? This free workshop manual will help you to do it yourself
    Remove the stabilizer rod.
    Replacement: anti roll bar links – SEAT TOLEDO IV (KG3). Tip from AUTODOC experts:
    Examine stabiliser bushes. Replace them if needed.
  9. Step 10
    Changing of Anti Roll Bar Links on Seat Toledo 4 2012 won't be an issue if you follow this illustrated step-by-step guide
    Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
  10. Step 11
    SEAT TOLEDO 1.4 TSI Anti Roll Bar Links replacement: online guides and video tutorials
    Install a new rod, tighten the fasteners. Use a combination spanner #17. Use HEX No.H5.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the SEAT Toledo IV Hatchback (KG3) model

Seat Toledo 4 tyre size

Popular maintenance tutorials for Seat Toledo 4

More manuals for Seat Toledo 4

Complete guides for changing the Drop links on different SEAT TOLEDO models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY SEAT Toledo IV Hatchback (KG3) Anti Roll Bar Links replacement - online guide
Tips & tricks for your SEAT Toledo IV Hatchback (KG3)
View more
  • How to change Drop links on SEAT Toledo IV Hatchback (KG3) 1.2 TSI - replacement tricks
    How to get your motorcycle ready for spring
    3K views
    Published on: 22/05/2025
  • Changing Stabilizer link Seat Toledo 4 1.6 TDI - Replacement Tips
    How to prevent car windows from fogging up | AUTODOC tips
    13K views
    Published on: 04/02/2021
  • Maintenance Hacks - SEAT Toledo IV Hatchback (KG3) 1.6 (CFNA) Sway bar link replacement guide
    Petrol or diesel: The engine showdown! | AUTODOC
    4K views
    Published on: 04/05/2021
  • Replace Drop link on Seat Toledo 4 - free video tips
    Save Money on Fuel with These Easy Tips | AUTODOC
    5K views
    Published on: 27/09/2022

Most commonly replaced car parts on SEAT TOLEDO

Professional manuals for the most common SEAT models

Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
SEAT Toledo IV Hatchback (KG3) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME