How to carry out replacement: Strut Mount 1.6 TDI Seat Toledo 4
Disclaimer
Change Seat Toledo 4 1.4 TSI Strut Mount yourself – manuals and video tutorials

How to change rear strut mount on SEAT Toledo IV Hatchback (KG3) – replacement guide

downloads: 2
Views: 11
Download your free tutorial and fix SEAT Toledo IV Hatchback (KG3) 1.2 TSI problems yourself Download for free 2.13 MB Strut Mount for Seat Toledo 4 Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
SEAT Toledo IV Hatchback (KG3) 1.2, SEAT Toledo IV Hatchback (KG3) 1.2 TSI, SEAT Toledo IV Hatchback (KG3) 1.2 TSI, SEAT Toledo IV Hatchback (KG3) 1.4 TSI, SEAT Toledo IV Hatchback (KG3) 1.6 TDI, SEAT Toledo IV Hatchback (KG3) 1.6, SEAT Toledo IV Hatchback (KG3) 1.6 TDI, SEAT Toledo IV Hatchback (KG3) 1.2 TSI, SEAT Toledo IV Hatchback (KG3) 1.2 TSI, SEAT Toledo IV Hatchback (KG3) 1.4 TSI, SEAT Toledo IV Hatchback (KG3) 1.4 TDI, SEAT Toledo IV Hatchback (KG3) 1.6 TDI, SEAT Toledo IV Hatchback (KG3) 1.0 TSI, SEAT Toledo IV Hatchback (KG3) 1.0 TSI … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Strut Mount for Toledo IV Hatchback (KG3) and other SEAT models
Alternative products
How to change Top strut mount on Seat Toledo 4 1.6 TDI – step-by-step instructions for straightforward car repair Top strut mount
Tools
Replacement: strut mount – SEAT TOLEDO IV (KG3). List of the tools you'll need:
Wire brush
WD-40 spray
Copper grease
Combination spanner #16
Combination spanner #17
Drive socket # 16
Torx bit T25
Wheel impact socket #17
Ratchet wrench
Torque wrench
Adjustable wrench
Vice
Hydraulic transmission jack
Wheel chock
Buy tools
Replacement: strut mount – SEAT TOLEDO IV (KG3). AUTODOC experts recommend:
  • The replacement procedure is identical for the mounts of the right and left shock absorbers of the rear suspension.
  • Both mounts of the rear shock struts should be replaced simultaneously.
  • Be sure to replace all self-locking nuts and bolts during installation.
  • All work should be done with the engine stopped.
Replacement: strut mount – SEAT TOLEDO IV (KG3). Take the following steps:
  1. Step 1
    How to change Strut Mount on Seat Toledo 4 2012 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace SEAT Toledo IV Hatchback (KG3) 1.6 TDI 2013 Strut Mount - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    Seat Toledo 4 1.6 (CFNA) 2014 Strut Mount replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. SEAT TOLEDO IV (KG3)
  4. Step 5
    Changing Strut Mount on SEAT Toledo IV Hatchback (KG3) 1.4 TSI 2015 by yourself
    Remove the wheel.
  5. Step 6
    How to remove SEAT TOLEDO 1.4 TDI 2016 Strut Mount - online easy-to-follow instructions
    Unscrew and remove the wheel arch cover fasteners. Use Torx T25.
  6. Step 7
    How to replace Strut Mount on SEAT Toledo IV Hatchback (KG3) 2017: download PDF manuals and video instructions
    Remove the wheel arch cover.
  7. Step 8
    How hard is it to do yourself: Strut Mount replacement on Seat Toledo 4 1.6 (CFNA) 2018 - download illustrated guide
    Secure the rear axle beam. Use a hydraulic transmission jack.
  8. Step 9
    Need to know how to renew Strut Mount on SEAT TOLEDO 2019? This free workshop manual will help you to do it yourself
    Clean the shock absorber fasteners. Use a wire brush. Use WD-40 spray.
  9. Step 10
    Changing of Strut Mount on Seat Toledo 4 2012 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the lower fastener of the shock absorber. Use a combination spanner #16. Use a drive socket #16. Use a ratchet wrench.
  10. Step 11
    SEAT TOLEDO 1.4 TSI Strut Mount replacement: online guides and video tutorials
    Unscrew the upper fastener of the shock absorber. Use a drive socket #16. Use a ratchet wrench.
    AUTODOC recommends:
    SEAT TOLEDO IV (KG3) – To avoid injury, hold the shock absorber while unscrewing the fastening bolts.
  11. Step 12
    Replacing Strut Mount on Seat Toledo 4 2014 1.6 TDI by yourself
    Remove the shock absorber.
  12. Step 13
    Toledo IV Hatchback (KG3) 1.4 TDI 2015 Strut Mount DIY replacement workshop manual
    Clean the shock absorber rod fastener. Use a wire brush. Use WD-40 spray.
  13. Step 14
    How to change Strut Mount on SEAT Toledo IV Hatchback (KG3) 2016 - tips and tricks
    Grip the shock absorber in a vice.
  14. Step 15
    Step-by-step recommendations for DIY replacement Seat Toledo 4 2017 1.4 TDI Strut Mount
    Remove the shock absorber piston rod fastening. Use a combination spanner #17. Use an adjustable wrench.
  15. Step 16
    DIY replacement of Strut Mount on SEAT Toledo IV Hatchback (KG3) 1.2 TSI 2018 is not an issue anymore with our step-by-step tutorial
    Release the vice and take out the shock absorber.
  16. Step 17
    How to change Strut Mount on Seat Toledo 4 2012 - free PDF and video manuals
    Remove the shock absorber mount, boot and bump stop.
    Replacement: strut mount – SEAT TOLEDO IV (KG3). Tip from AUTODOC experts:
    Examine the shock absorber dust cap and the bump stop. Replace them if necessary.
  17. Step 18
    How to replace SEAT Toledo IV Hatchback (KG3) 1.6 TDI 2013 Strut Mount - step-by-step manuals and video guides
    Install the new mount, boot, and bump stop on the shock absorber.
  18. Step 19
    Seat Toledo 4 1.6 (CFNA) 2014 Strut Mount replacement: free workshop manuals
    Grip the shock absorber in a vice.
  19. Step 20
    Changing Strut Mount on SEAT Toledo IV Hatchback (KG3) 1.4 TSI 2015 by yourself
    Screw the shock strut piston rod upper fastening. Use a combination spanner #17. Use an adjustable wrench. Use a torque wrench. Tighten it to 25 Nm torque.
  20. Step 21
    How to remove SEAT TOLEDO 1.4 TDI 2016 Strut Mount - online easy-to-follow instructions
    Release the vice and take out the shock absorber.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the SEAT Toledo IV Hatchback (KG3) model

Seat Toledo 4 tyre size

Popular maintenance tutorials for Seat Toledo 4

More manuals for Seat Toledo 4

Complete guides for changing the Strut mount on different SEAT TOLEDO models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY SEAT Toledo IV Hatchback (KG3) Strut Mount replacement - online guide
Tips & tricks for your SEAT Toledo IV Hatchback (KG3)
View more
  • How to change Strut mount on SEAT Toledo IV Hatchback (KG3) 1.2 TSI - replacement tricks
    How to remove rust | AUTODOC tips
    27K views
    Published on: 16/09/2021
  • Changing Top mount Seat Toledo 4 1.6 TDI - Replacement Tips
    How to get your motorcycle ready for spring
    3K views
    Published on: 22/05/2025
  • Maintenance Hacks - SEAT Toledo IV Hatchback (KG3) 1.6 (CFNA) Top strut mount replacement guide
    Understanding Car Tools: The Key Differences You Need to Know | AUTODOC tips
    8K views
    Published on: 16/12/2021
  • Replace Top mounts on Seat Toledo 4 - free video tips
    When, why, and how to change engine oil | AUTODOC tips
    6K views
    Published on: 16/08/2024

Most commonly replaced car parts on SEAT TOLEDO

Professional manuals for the most common SEAT models

Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
SEAT Toledo IV Hatchback (KG3) Strut Mount replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME