How to carry out replacement: Wheel Bearing 1.9 TDI Seat Toledo 1m
Disclaimer
Change Seat Toledo 1m 1.6 16V Wheel Bearing yourself – manuals and video tutorials

How to change rear wheel bearing on SEAT Toledo II Saloon (1M2) – replacement guide

downloads: 3
Views: 16
Download your free tutorial and fix SEAT Toledo II Saloon (1M2) 1.9 TDI problems yourself Download for free 2.62 MB Wheel Bearing for Seat Toledo 1m Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
SEAT Toledo II Saloon (1M2) 1.6, SEAT Toledo II Saloon (1M2) 1.8 20V, SEAT Toledo II Saloon (1M2) 2.3 V5, SEAT Toledo II Saloon (1M2) 1.9 TDI, SEAT Toledo II Saloon (1M2) 1.9 TDI, SEAT Toledo II Saloon (1M2) 1.4 16V, SEAT Toledo II Saloon (1M2) 1.6 16V, SEAT Toledo II Saloon (1M2) 2.3 V5 20V, SEAT Toledo II Saloon (1M2) 1.9 TDI, SEAT Toledo II Saloon (1M2) 1.9 TDI, SEAT Toledo II Saloon (1M2) 1.8 20VT … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Wheel Bearing for Toledo II Saloon (1M2) and other SEAT models
Alternative products
How to change Wheel bearing kit on Seat Toledo 1m 1.9 TDI – step-by-step instructions for straightforward car repair Wheel bearing kit
Tools
Replacement: wheel bearing – SEAT TOLEDO II (1M2). List of the tools you'll need:
Wire brush
Nylon cleaning brush
WD-40 spray
All-purpose cleaning spray
Brake cleaner
Anti-squeal paste
Ceramic grease
Torque wrench
Drive socket # 13
12-point socket # 30
HEX bit No.H8
Combination spanner #13
Combination spanner #15
Wheel impact socket #17
Ratchet wrench
Tap wrench
Impact screwdriver
Phillips screwdriver
3-Arm Gear Puller
Bush and bearing driver set
Hammer
Rubber mallet
Crow bar
Hydraulic transmission jack
Wheel chock
Buy tools
Replacement: wheel bearing – SEAT TOLEDO II (1M2). AUTODOC recommends:
  • Do not re-use the bearing assembly of your SEAT TOLEDO II (1M2) car.
  • The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
  • All work should be done with the engine stopped.
Replacement: wheel bearing – SEAT TOLEDO II (1M2). Use the following procedure:
  1. Step 1
    Open the bonnet.
    Step 2
    How to change Wheel Bearing on Seat Toledo 1m 1998 - free PDF and video manuals
    Unscrew the brake fluid reservoir cap.
  2. Step 3
    Secure the wheels with chocks.
    Step 4
    How to replace SEAT Toledo II Saloon (1M2) 1.9 TDI 1999 Wheel Bearing - step-by-step manuals and video guides
    Loosen the wheel bolts. Use wheel impact socket #17. Use a tap wrench.
  3. Step 5
    Raise the car.
    Replacement: wheel bearing – SEAT TOLEDO II (1M2). AUTODOC experts recommend:
    If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.
    Step 6
    Seat Toledo 1m 1.6 16V 2000 Wheel Bearing replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. SEAT TOLEDO II (1M2)
  4. Step 7
    Changing Wheel Bearing on SEAT Toledo II Saloon (1M2) 1.8 20V 2001 by yourself
    Remove the wheel.
  5. Step 8
    How to remove SEAT TOLEDO 2.3 V5 2002 Wheel Bearing - online easy-to-follow instructions
    Clean the brake caliper fasteners. Use a wire brush. Use WD-40 spray.
  6. Step 9
    How to replace Wheel Bearing on SEAT Toledo II Saloon (1M2) 2003: download PDF manuals and video instructions
    Unscrew the brake caliper fasteners. Use a combination spanner #13. Use a combination spanner #15.
  7. Step 10
    How hard is it to do yourself: Wheel Bearing replacement on Seat Toledo 1m 1.8 20VT 2004 - download illustrated guide
    Remove the fastening bolts.
  8. Step 11
    Need to know how to renew Wheel Bearing on SEAT TOLEDO 2005? This free workshop manual will help you to do it yourself
    Remove the brake caliper. Use a crowbar.
    Replacement: wheel bearing – SEAT TOLEDO II (1M2). Professionals recommend:
    Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur.
  9. Step 12
    Changing of Wheel Bearing on Seat Toledo 1m 2006 won't be an issue if you follow this illustrated step-by-step guide
    Remove the brake pads.
  10. Step 13
    SEAT TOLEDO 1.6 16V Wheel Bearing replacement: online guides and video tutorials
    Clean the brake caliper bracket fasteners. Use a wire brush. Use WD-40 spray.
  11. Step 14
    Replacing Wheel Bearing on Seat Toledo 1m 1999 1.9 TDI by yourself
    Unscrew the brake caliper bracket fasteners. Use HEX No.H8. Use a ratchet wrench.
  12. Step 15
    Toledo II Saloon (1M2) 2.3 V5 2000 Wheel Bearing DIY replacement workshop manual
    Remove the fastening bolts.
  13. Step 16
    How to change Wheel Bearing on SEAT Toledo II Saloon (1M2) 2001 - tips and tricks
    Remove the brake caliper bracket.
  14. Step 17
    Step-by-step recommendations for DIY replacement Seat Toledo 1m 2002 2.3 V5 Wheel Bearing
    Clean the brake disc fastener. Use a wire brush. Use WD-40 spray.
  15. Step 18
    DIY replacement of Wheel Bearing on SEAT Toledo II Saloon (1M2) 1.6 2003 is not an issue anymore with our step-by-step tutorial
    Unscrew the brake disc fasteners. Use an impact screwdriver. Use a hammer.
  16. Step 19
    How to change Wheel Bearing on Seat Toledo 1m 1998 - free PDF and video manuals
    Remove the fastening bolt.
  17. Step 20
    How to replace SEAT Toledo II Saloon (1M2) 1.9 TDI 1999 Wheel Bearing - step-by-step manuals and video guides
    Remove the brake disc.
  18. Step 21
    Seat Toledo 1m 1.6 16V 2000 Wheel Bearing replacement: free workshop manuals
    Remove the hub bearing cap. Use a crowbar. Use a hammer.
  19. Step 22
    Changing Wheel Bearing on SEAT Toledo II Saloon (1M2) 1.8 20V 2001 by yourself
    Support the rear suspension beam. Use a hydraulic transmission jack.
  20. Step 23
    How to remove SEAT TOLEDO 2.3 V5 2002 Wheel Bearing - online easy-to-follow instructions
    Unscrew the wheel hub fastener. Use 12-point socket No.30. Use a tap wrench.
  21. Step 24
    How to replace Wheel Bearing on SEAT Toledo II Saloon (1M2) 2003: download PDF manuals and video instructions
    Remove the fastening nut.
  22. Step 25
    How hard is it to do yourself: Wheel Bearing replacement on Seat Toledo 1m 1.8 20VT 2004 - download illustrated guide
    Remove the hub and the bearing together, since they are made as an assembly. Use 3-Arm Gear Puller.
  23. Step 26
    Need to know how to renew Wheel Bearing on SEAT TOLEDO 2005? This free workshop manual will help you to do it yourself
    Remove the inner bearing ring from the stub axle. Use 3-Arm Gear Puller.
  24. Step 27
    Changing of Wheel Bearing on Seat Toledo 1m 2006 won't be an issue if you follow this illustrated step-by-step guide
    Clean the hub bearing mounting seat. Use a wire brush. Use all-purpose cleaning spray.
  25. Step 28
    SEAT TOLEDO 1.6 16V Wheel Bearing replacement: online guides and video tutorials
    Clean the ABS sensor. Use a nylon cleaning brush. Use all-purpose cleaning spray.
  26. Step 29
    Replacing Wheel Bearing on Seat Toledo 1m 1999 1.9 TDI by yourself
    Install the new wheel hub together with the bearing. Use a bush and bearing driver set. Use a hammer.
  27. Step 30
    Toledo II Saloon (1M2) 2.3 V5 2000 Wheel Bearing DIY replacement workshop manual
    Install the fastening nut.
  28. Step 31
    How to change Wheel Bearing on SEAT Toledo II Saloon (1M2) 2001 - tips and tricks
    Tighten the hub fastener. Use 12-point socket No.30. Use a torque wrench. Tighten it to 175 Nm torque.
  29. Step 32
    Step-by-step recommendations for DIY replacement Seat Toledo 1m 2002 2.3 V5 Wheel Bearing
    Install the hub bearing cap. Use a rubber mallet.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the SEAT Toledo II Saloon (1M2) model

Seat Toledo 1m tyre size

Popular maintenance tutorials for Seat Toledo 1m

More manuals for Seat Toledo 1m

Complete guides for changing the Wheel bearings on different SEAT TOLEDO models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY SEAT Toledo II Saloon (1M2) Wheel Bearing replacement - online guide
Tips & tricks for your SEAT Toledo II Saloon (1M2)
View more
  • How to change Wheel bearings on SEAT Toledo II Saloon (1M2) 1.6 - replacement tricks
    What causes engine misfire? | AUTODOC
    6K views
    Published on: 10/07/2020
  • Changing Hub bearing Seat Toledo 1m 1.9 TDI - Replacement Tips
    How to choose the right engine oil for your car | AUTODOC
    12K views
    Published on: 01/07/2020
  • Maintenance Hacks - SEAT Toledo II Saloon (1M2) 1.6 16V Wheel bearing kit replacement guide
    Unveiling the secrets: Detecting vacuum leaks with a Smoke Machine | AUTODOC
    19K views
    Published on: 23/07/2020
  • Replace Wheel hub bearing on Seat Toledo 1m - free video tips
    Top 5 reasons why the suspension knocks | AUTODOC tips
    2M views
    Published on: 09/09/2022

Most commonly replaced car parts on SEAT TOLEDO

Professional manuals for the most common SEAT models

Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
SEAT Toledo II Saloon (1M2) Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME