How to carry out replacement: Wheel Bearing 1.2 (CN01, CN06) RENAULT Twingo II Kasten / Schrägheck (CNO_)
Disclaimer
Change RENAULT Twingo II Kasten / Schrägheck (CNO_) 1.2 (CN01, CN06) Wheel Bearing yourself – manuals and video tutorials

How to change rear wheel bearing on RENAULT Twingo II Box Body / Hatchback (CNO_) – replacement guide

downloads: 0
Views: 15
Download your free tutorial and fix RENAULT Twingo II Box Body / Hatchback (CNO_) 1.5 dCi (CN03) problems yourself Download for free 1.45 MB Wheel Bearing for RENAULT Twingo II Kasten / Schrägheck (CNO_) Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
RENAULT Twingo II Box Body / Hatchback (CNO_) 1.2 (CN01, CN06), RENAULT Twingo II Box Body / Hatchback (CNO_) 1.5 dCi (CN03) … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Wheel Bearing for Twingo II Box Body / Hatchback (CNO_) and other RENAULT models
How to change Wheel bearing kit on RENAULT Twingo II Kasten / Schrägheck (CNO_) 1.2 (CN01, CN06) – step-by-step instructions for straightforward car repair Wheel bearing kit
How to change Wheel bearing kit on Twingo II Box Body / Hatchback (CNO_) – tips for proper car maintenance
Wheel bearing kit for Twingo II Box Body / Hatchback (CNO_) Petrol (75 hp)
Simple DIY car repair steps – Replacing Wheel bearing kit on Twingo II Box Body / Hatchback (CNO_)
Wheel bearing kit for Twingo II Box Body / Hatchback (CNO_) Diesel (75 hp)
Tools
Replacement: wheel bearing – RENAULT Twingo II Kasten / Schrägheck (CNO_). Tools you might need:
Wire brush
All-purpose cleaning spray
Ceramic grease
Torque wrench
Drive socket # 30
Wheel impact socket #17
Ratchet wrench
Tap wrench
Crow bar
Hammer
Circlip pliers
Bush and bearing driver set
Wheel chock
Buy tools
Replacement: wheel bearing – RENAULT Twingo II Kasten / Schrägheck (CNO_). Professionals recommend:
  • Do not re-use the bearing assembly of your RENAULT Twingo II Kasten / Schrägheck (CNO_) car.
  • The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
  • All work should be done with the engine stopped.
Replacement: wheel bearing – RENAULT Twingo II Kasten / Schrägheck (CNO_). Take the following steps:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Wheel Bearing on RENAULT Twingo II Kasten / Schrägheck (CNO_) 2010 - free PDF and video manuals
    Loosen the wheel bolts. Use wheel impact socket #17. Use a tap wrench.
  2. Step 3
    Raise the car.
    Replacement: wheel bearing – RENAULT Twingo II Kasten / Schrägheck (CNO_). AUTODOC experts recommend:
    If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.
    Step 4
    How to replace RENAULT Twingo II Box Body / Hatchback (CNO_) 1.2 (CN01, CN06) 2011 Wheel Bearing - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  3. Step 5
    RENAULT Twingo II Kasten / Schrägheck (CNO_) 1.5 dCi (CN03) 2012 Wheel Bearing replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing Wheel Bearing on RENAULT Twingo II Box Body / Hatchback (CNO_) 1.5 dCi (CN03) 2013 by yourself
    Remove the hub bearing cap. Use a crowbar. Use a hammer.
  5. Step 7
    How to remove RENAULT TWINGO 1.2 (CN01, CN06) 2014 Wheel Bearing - online easy-to-follow instructions
    Unscrew the wheel hub fastener. Use a drive socket #30. Use a tap wrench.
  6. Step 8
    How to replace Wheel Bearing on RENAULT Twingo II Box Body / Hatchback (CNO_) 2010: download PDF manuals and video instructions
    Remove the fastening nut.
  7. Step 9
    How hard is it to do yourself: Wheel Bearing replacement on RENAULT Twingo II Kasten / Schrägheck (CNO_) 1.2 (CN01, CN06) 2011 - download illustrated guide
    Remove the brake drum assembled with the wheel hub bearing.
    Replacement: wheel bearing – RENAULT Twingo II Kasten / Schrägheck (CNO_). Tip:
    Examine the brake drum. Replace it if necessary.
  8. Step 10
    Need to know how to renew Wheel Bearing on RENAULT TWINGO 2012? This free workshop manual will help you to do it yourself
    Remove the wheel hub bearing retaining ring. Use circlip pliers.
  9. Step 11
    Changing of Wheel Bearing on RENAULT Twingo II Kasten / Schrägheck (CNO_) 2013 won't be an issue if you follow this illustrated step-by-step guide
    Press out the wheel hub bearing. Use a bush and bearing driver set.
  10. Step 12
    RENAULT TWINGO 1.2 (CN01, CN06) Wheel Bearing replacement: online guides and video tutorials
    Clean the hub bearing mounting seat. Use a wire brush.
  11. Step 13
    Replacing Wheel Bearing on RENAULT Twingo II Kasten / Schrägheck (CNO_) 2010 1.2 (CN01, CN06) by yourself
    Press fit the new wheel hub bearing into the brake drum. Use a bush and bearing driver set.
    AUTODOC recommends:
    Check to make sure the wheel hub bearing is positioned correctly. Avoid its misalignment.Stop pressing on the surface of the bearing immediately after it has been fitted into its mounting seat.
  12. Step 14
    Twingo II Box Body / Hatchback (CNO_) 1.2 (CN01, CN06) 2011 Wheel Bearing DIY replacement workshop manual
    Install the wheel hub bearing retaining ring. Use circlip pliers.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the RENAULT Twingo II Box Body / Hatchback (CNO_) model.

Browse tyres

Popular maintenance tutorials for RENAULT Twingo II Kasten / Schrägheck (CNO_)

More manuals for RENAULT Twingo II Kasten / Schrägheck (CNO_)

Complete guides for changing the Wheel bearings on different RENAULT TWINGO models

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
RENAULT Twingo II Box Body / Hatchback (CNO_) Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY RENAULT Twingo II Box Body / Hatchback (CNO_) Wheel Bearing replacement - online guide
Tips & tricks for your RENAULT Twingo II Box Body / Hatchback (CNO_)
View more
  • How to change Wheel bearings on RENAULT Twingo II Box Body / Hatchback (CNO_) 1.2 (CN01, CN06) - replacement tricks
    DIY car soundproofing | AUTODOC tips
    76K views
    Published on: 15/04/2021
  • Changing Hub bearing RENAULT Twingo II Kasten / Schrägheck (CNO_) 1.2 (CN01, CN06) - Replacement Tips
    How to replace the suspension on a BMW E30 Turbo | SUPERCAR AUTODOC
    1K views
    Published on: 04/03/2021
  • Maintenance Hacks - RENAULT Twingo II Box Body / Hatchback (CNO_) 1.5 dCi (CN03) Wheel bearing kit replacement guide
    What to check when buying a used car | AUTODOC tips
    5K views
    Published on: 24/10/2020
  • Replace Wheel hub bearing on RENAULT Twingo II Kasten / Schrägheck (CNO_) - free video tips
    How to repair a chipped or cracked windscreen | AUTODOC tips
    7K views
    Published on: 14/12/2023

Most commonly replaced car parts on RENAULT TWINGO

Professional manuals for the most common RENAULT models