Important!
This replacement procedure can be used for:
RENAULT KANGOO Express (FW0/1_) 1.6 (FW00, FW0E, FW0N, FW0P, FW0Y), RENAULT KANGOO Express (FW0/1_) 1.6 16V (FW03, FW09, FW0D, FW0U, FW0W, FW13), RENAULT KANGOO Express (FW0/1_) 1.5 dCi 70 (FW0A, KW0V), RENAULT KANGOO Express (FW0/1_) 1.5 dCi 85 (FW0K, FW0L, FW0B), RENAULT KANGOO Express (FW0/1_) 1.5 dCi 105 (FW0F) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Tools
Replacement: wheel bearing – RENAULT KANGOO Express (FW0/1_). Tools you might need:
Wire brush
All-purpose cleaning spray
Ceramic grease
Torque wrench
Drive socket # 30
Wheel impact socket #17
Ratchet wrench
Tap wrench
Crow bar
Hammer
Circlip pliers
Bush and bearing driver set
Wheel chock
Replacement: wheel bearing – RENAULT KANGOO Express (FW0/1_). Professionals recommend:
  • Do not re-use the bearing assembly of your RENAULT KANGOO Express (FW0/1_) car.
  • The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
  • All work should be done with the engine stopped.
Replacement: wheel bearing – RENAULT KANGOO Express (FW0/1_). Take the following steps:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Wheel Bearing on Renault Kangoo 2 Express 2008 - free PDF and video manuals
    Loosen the wheel bolts. Use wheel impact socket #17. Use a tap wrench.
  2. Step 3
    Raise the car.
    Replacement: wheel bearing – RENAULT KANGOO Express (FW0/1_). AUTODOC experts recommend:
    If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.
    Step 4
    How to replace RENAULT KANGOO Express (FW0/1_) 1.5 dCi 70 (FW0A, KW0V) 2009 Wheel Bearing - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  3. Step 5
    Renault Kangoo 2 Express 1.5 dCi 85 (FW0K, FW0L, FW0B) 2010 Wheel Bearing replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing Wheel Bearing on RENAULT KANGOO Express (FW0/1_) 1.5 dCi 75 (FW07, FW10, FW04) 2011 by yourself
    Remove the hub bearing cap. Use a crowbar. Use a hammer.
  5. Step 7
    How to remove RENAULT KANGOO 1.5 dCi 110 (FW0C, FW0H) 2012 Wheel Bearing - online easy-to-follow instructions
    Unscrew the wheel hub fastener. Use a drive socket #30. Use a tap wrench.
  6. Step 8
    How to replace Wheel Bearing on RENAULT KANGOO Express (FW0/1_) 2013: download PDF manuals and video instructions
    Remove the fastening nut.
  7. Step 9
    How hard is it to do yourself: Wheel Bearing replacement on Renault Kangoo 2 Express 1.5 dCi 110 (FW06, FW12) 2014 - download illustrated guide
    Remove the brake drum assembled with the wheel hub bearing.
    Replacement: wheel bearing – RENAULT KANGOO Express (FW0/1_). Tip:
    Examine the brake drum. Replace it if necessary.
  8. Step 10
    Need to know how to renew Wheel Bearing on RENAULT KANGOO 2015? This free workshop manual will help you to do it yourself
    Remove the wheel hub bearing retaining ring. Use circlip pliers.
  9. Step 11
    Changing of Wheel Bearing on Renault Kangoo 2 Express 2016 won't be an issue if you follow this illustrated step-by-step guide
    Press out the wheel hub bearing. Use a bush and bearing driver set.
  10. Step 12
    RENAULT KANGOO 1.6 (FW00, FW0E, FW0N, FW0P, FW0Y) Wheel Bearing replacement: online guides and video tutorials
    Clean the hub bearing mounting seat. Use a wire brush.
  11. Step 13
    Replacing Wheel Bearing on Renault Kangoo 2 Express 2018 1.5 dCi 70 (FW0A, KW0V) by yourself
    Press fit the new wheel hub bearing into the brake drum. Use a bush and bearing driver set.
    AUTODOC recommends:
    Check to make sure the wheel hub bearing is positioned correctly. Avoid its misalignment.Stop pressing on the surface of the bearing immediately after it has been fitted into its mounting seat.
  12. Step 14
    KANGOO Express (FW0/1_) 1.5 dCi 110 (FW0C, FW0H) 2019 Wheel Bearing DIY replacement workshop manual
    Install the wheel hub bearing retaining ring. Use circlip pliers.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the RENAULT Kangoo II Express (FW) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
RENAULT KANGOO Express (FW0/1_) Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY RENAULT KANGOO Express (FW0/1_) Wheel Bearing replacement - online guide
Tips & tricks for your RENAULT KANGOO Express (FW0/1_)
View more
  • How to change Wheel bearings on RENAULT KANGOO Express (FW0/1_) 1.5 dCi 90 (FW0G, FW05, FW08, FW11) - replacement tricks
    Top 5 tips to prevent car rust | AUTODOC tips
  • Changing Hub bearing Renault Kangoo 2 Express 1.5 dCi 70 (FW0A, KW0V) - Replacement Tips
    Top 6 products for enhancing your car | AUTODOC tips
  • Maintenance Hacks - RENAULT KANGOO Express (FW0/1_) 1.5 dCi 85 (FW0K, FW0L, FW0B) Wheel bearing kit replacement guide
    How to unlock your car without a key | AUTODOC tips
  • Replace Wheel hub bearing on Renault Kangoo 2 Express - free video tips
    How to paint a brake caliper | AUTODOC tips