Disclaimer
How to change rear wheel bearing on RENAULT 9 Saloon (L42_) – replacement guide
downloads:
1
Views:
10
Important!
This replacement procedure can be used for:
RENAULT 9 Saloon (L42_) 1.4 Turbo, RENAULT 9 Saloon (L42_) 1.4 Turbo (L425) … View more
The steps may slightly vary depending on the car design.
RENAULT 9 Saloon (L42_) 1.4 Turbo, RENAULT 9 Saloon (L42_) 1.4 Turbo (L425) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Wheel Bearing for 9 Saloon (L42_) and other RENAULT models
Alternative products

Wire brush
WD-40 spray
All-purpose cleaning spray
Copper grease
Drive socket # 30
Wheel impact socket #17
Torque wrench
Tap wrench
Hammer
Circlip pliers
Bush and bearing driver set
Rubber mallet
Crow bar
Wheel chock
Replacement: wheel bearing – RENAULT 9 (L42_). Professionals recommend:
- Do not re-use the bearing assembly of your RENAULT 9 (L42_) car.
- The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
- All work should be done with the engine stopped.
Replacement: wheel bearing – RENAULT 9 (L42_). Recommended sequence of steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the rear of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. RENAULT 9 (L42_) - Step 5
Remove the wheel. - Step 6
Clean the brake drum. Use a wire brush. Use WD-40 spray. - Step 7
Remove the hub bearing protection cap. Use a hammer. Use a crowbar.Replacement: wheel bearing – RENAULT 9 (L42_). AUTODOC recommends:Some cars are not equipped with wheel hub caps. - Step 8
Clean the wheel hub fastener. Use WD-40 spray. - Step 9
Unscrew the wheel hub axle nut. Use a drive socket #30. Use a tap wrench. - Step 10
Remove the brake drum.Replacement: wheel bearing – RENAULT 9 (L42_). AUTODOC experts recommend:Examine the brake drum. Replace it if necessary. - Step 11
Remove the wheel hub bearing retaining ring. Use circlip pliers. - Step 12
Press out the wheel hub bearing. Use a bush and bearing driver set. - Step 13
Clean the hub bearing mounting seat. Use WD-40 spray. - Step 14
Press a new bearing into the wheel hub. Use a bush and bearing driver set.AUTODOC recommends:Replacement: wheel bearing – RENAULT 9 (L42_). Do not use excessive force during installation. This may damage the part.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT 9 Saloon (L42_) model
Popular maintenance tutorials for Renault 9 Saloon
Complete guides for changing the Wheel bearings on different RENAULT 9 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT 9 Saloon (L42_)
View more
#DIY Wheel Rim Restoration: Revive Scratches and Chips Easily!
Save Money on Fuel with These Easy Tips | AUTODOC
How to repair a bumper yourself | AUTODOC tips
Coolant comparison test | AUTODOC
Most commonly replaced car parts on RENAULT 9
Time to replace parts? Get even better deals in our Shop app.

SCAN ME




























