
Disclaimer
How to change rear wheel bearing on RENAULT 5 Van – replacement guide
downloads:
1
Views:
33
Important!
This replacement procedure can be used for:
RENAULT 5 Box (238_) 1.1, RENAULT 5 Box (238_) 1.0 (2382), RENAULT 5 Box (238_) 0.8 (2381) … View more
The steps may slightly vary depending on the car design.
RENAULT 5 Box (238_) 1.1, RENAULT 5 Box (238_) 1.0 (2382), RENAULT 5 Box (238_) 0.8 (2381) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Wheel Bearing for 5 Box (238_) and other RENAULT models
Wheel bearing kit
Alternative products

Wire brush
All-purpose cleaning spray
Ceramic grease
Torque wrench
Drive socket # 30
Wheel impact socket #17
Ratchet wrench
Tap wrench
Crow bar
Hammer
Circlip pliers
Bush and bearing driver set
Wheel chock
Replacement: wheel bearing – RENAULT 5 Box (238_). Professionals recommend:
- Do not re-use the bearing assembly of your RENAULT 5 Box (238_) car.
- The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
- All work should be done with the engine stopped.
Replacement: wheel bearing – RENAULT 5 Box (238_). Take the following steps:
- Step 1Secure the wheels with chocks.Step 2Loosen the wheel bolts. Use wheel impact socket #17. Use a tap wrench.
- Step 3Raise the car.Replacement: wheel bearing – RENAULT 5 Box (238_). AUTODOC experts recommend:If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.Step 4Unscrew the wheel bolts.AUTODOC recommends:To avoid injury, hold up the wheel when unscrewing the bolts.
- Step 5Remove the wheel.
- Step 6Remove the hub bearing cap. Use a crowbar. Use a hammer.
- Step 7Unscrew the wheel hub fastener. Use a drive socket #30. Use a tap wrench.
- Step 8Remove the fastening nut.
- Step 9Remove the brake drum assembled with the wheel hub bearing.Replacement: wheel bearing – RENAULT 5 Box (238_). Tip:Examine the brake drum. Replace it if necessary.
- Step 10Remove the wheel hub bearing retaining ring. Use circlip pliers.
- Step 11Press out the wheel hub bearing. Use a bush and bearing driver set.
- Step 12Clean the hub bearing mounting seat. Use a wire brush.
- Step 13Press fit the new wheel hub bearing into the brake drum. Use a bush and bearing driver set.AUTODOC recommends:Check to make sure the wheel hub bearing is positioned correctly. Avoid its misalignment.Stop pressing on the surface of the bearing immediately after it has been fitted into its mounting seat.
- Step 14Install the wheel hub bearing retaining ring. Use circlip pliers.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT 5 Van model
Popular maintenance tutorials for Renault R5 Van
Complete guides for changing the Wheel bearings on different RENAULT 5 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT 5 Box (238_)
View more
- #DIY Wheel Rim Restoration: Revive Scratches and Chips Easily!
- What to do if your check engine light is on | AUTODOC tips
- 3 essential tips for choosing summer tyres | Get ready for warmer weather
- 5 most common causes of oil leaks | AUTODOC tips
Most commonly replaced car parts on RENAULT 5
Time to replace parts? Get even better deals in our Shop app.

SCAN ME