Disclaimer
How to change rear wheel bearing on OPEL Corsa С Van (X01) – replacement guide
downloads:
4
Views:
132
Important!
This replacement procedure can be used for:
OPEL Corsa C Van (X01) 1.3 CDTI 16V (F08, W5L), OPEL Corsa C Van (X01) 1.4 (W5L, F08), OPEL Corsa C Van (X01) 1.3 CDTI 16V (F08, W5L), OPEL Corsa C Van (X01) 1.7 DTI 16V (F08, W5L), OPEL Corsa C Van (X01) 1.2 16V (F08, W5L) … View more
The steps may slightly vary depending on the car design.
OPEL Corsa C Van (X01) 1.3 CDTI 16V (F08, W5L), OPEL Corsa C Van (X01) 1.4 (W5L, F08), OPEL Corsa C Van (X01) 1.3 CDTI 16V (F08, W5L), OPEL Corsa C Van (X01) 1.7 DTI 16V (F08, W5L), OPEL Corsa C Van (X01) 1.2 16V (F08, W5L) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Wheel Bearing for Corsa C Van (X01) and other OPEL models
Alternative products

Wire brush
WD-40 spray
All-purpose cleaning spray
Copper grease
Torx bit T30
Drive socket # 32
Wheel impact socket #17
Ratchet wrench
Torque wrench
Tap wrench
Hammer
Crow bar
Rubber mallet
Wheel chock
Replacement: wheel bearing – OPEL CORSA C Box (F08, W5L). AUTODOC recommends:
- Do not re-use the bearing assembly of your OPEL CORSA C Box (F08, W5L) car.
- The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
- All work should be done with the engine stopped.
Replacement: wheel bearing – OPEL CORSA C Box (F08, W5L). Use the following procedure:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the rear of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. OPEL CORSA C Box (F08, W5L) - Step 5
Remove the wheel. - Step 6
Clean the brake drum fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the brake drum fastening Use Torx T30. Use a ratchet wrench. - Step 8
Remove the brake drum.Replacement: wheel bearing – OPEL CORSA C Box (F08, W5L). Tip:Examine the brake drum. Replace it if necessary. - Step 9
Remove the hub bearing protection cap. Use a crowbar. Use a hammer.Replacement: wheel bearing – OPEL CORSA C Box (F08, W5L). AUTODOC experts recommend:Some cars are not equipped with wheel hub caps. - Step 10
Unscrew the wheel hub axle nut. Use a drive socket #32. Use a tap wrench. - Step 11
Remove the fastening nut. - Step 12
Remove the hub and the bearing together, since they are a sealed unit. - Step 13
Clean the hub bearing mounting seat. Use a wire brush. Use all-purpose cleaning spray. - Step 14
Install the new wheel hub with a bearing. - Step 15
Install the fastening nut.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the OPEL Corsa C Van (X01) model
Popular maintenance tutorials for Opel Corsa C Van
Complete guides for changing the Wheel bearings on different OPEL CORSA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your OPEL Corsa C Van (X01)
View more
Save Money on Fuel with These Easy Tips | AUTODOC
What causes engine misfire? | AUTODOC
#TPMS Explained: Why Your Light is On and How to Respond Safely
How to unlock your car without a key | AUTODOC tips
Most commonly replaced car parts on OPEL CORSA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME



















