How to carry out replacement: Wheel Bearing 1.6 MZR (BL14) Mazda 3 BL
Disclaimer
Change Mazda 3 BL 2.0 DISI (BLEFW) Wheel Bearing yourself – manuals and video tutorials

How to change rear wheel bearing on MAZDA 3 Hatchback (BL) – replacement guide

downloads: 4
Views: 512
Download your free tutorial and fix MAZDA 3 (BL) 1.6 MZR problems yourself Download for free 2.23 MB Wheel Bearing for Mazda 3 BL Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
MAZDA 3 (BL) 1.6 MZR CD (BL14), MAZDA 3 (BL) 1.6 MZR (BL14), MAZDA 3 (BL) 2.0 MZR DISI (BLEFW), MAZDA 3 (BL) 2.0 MZR (BLEFW), MAZDA 3 (BL) 1.6 MZ-CD (BL14), MAZDA 3 (BL) 2.2 MZR CD (BL10), MAZDA 3 (BL) 2.2 MZR CD (BL10), MAZDA 3 (BL) 2.3 MPS Turbo (BL14), MAZDA 3 (BL) 2.5 (BL10), MAZDA 3 (BL) 2.0 MZR (BLEFW), MAZDA 3 (BL) 1.6 MZR, MAZDA 3 (BL) 2.0 DISI (BLEFW), MAZDA 3 (BL) 2.3 MPS Turbo (BL3FW), MAZDA 3 (BL) 2.0 … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Wheel Bearing for 3 (BL) and other MAZDA models
Alternative products
How to change Wheel bearing kit on Mazda 3 BL 1.6 MZR (BL14) – step-by-step instructions for straightforward car repair Wheel bearing kit
Tools
Replacement: wheel bearing – MAZDA 3 (BL). Tools you might need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Sealant
Electronic spray
Torque wrench
HEX bit no.H7.
Torx bit T50
Drive socket # 6
Drive socket # 14
Wheel impact socket #19
Ratchet wrench
Crow bar
Flat Screwdriver
Rubber mallet
Wheel chock
Buy tools
Replacement: wheel bearing – MAZDA 3 (BL). Tip from AUTODOC experts:
  • Do not re-use the bearing assembly of your MAZDA 3 (BL) car.
  • The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
  • Please note: all work on the car – MAZDA 3 (BL) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    How to change Wheel Bearing on Mazda 3 BL 2008 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace MAZDA 3 (BL) 1.6 MZR (BL14) 2009 Wheel Bearing - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  3. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    Mazda 3 BL 1.6 MZ-CD (BL14) 2010 Wheel Bearing replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. MAZDA 3 (BL)
  4. Step 5
    Changing Wheel Bearing on MAZDA 3 (BL) 2.3 MPS Turbo (BL14) 2011 by yourself
    Remove the wheel.
  5. Step 6
    How to remove MAZDA 3 2.2 MZR CD (BL10) 2012 Wheel Bearing - online easy-to-follow instructions
    Detach the brake caliper retaining spring. Use a flat screwdriver.
  6. Step 7
    How to replace Wheel Bearing on MAZDA 3 (BL) 2013: download PDF manuals and video instructions
    Remove the dust boot caps of the brake caliper guide pins. Use a flat screwdriver.
  7. Step 8
    Clean the brake caliper fasteners. Use a wire brush. Use WD-40 spray.
    Step 9
    How hard is it to do yourself: Wheel Bearing replacement on Mazda 3 BL 2.0 MZR (BLEFW) 2014 - download illustrated guide
    Unscrew the brake caliper fastening. Use HEX No.H7. Use a ratchet wrench.
  8. Step 10
    Spread the brake pads. Use a crowbar.
    Step 11
    Need to know how to renew Wheel Bearing on MAZDA 3 2008? This free workshop manual will help you to do it yourself
    Remove the brake caliper.
    AUTODOC recommends:
    Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur. Check the brake caliper bracket, brake caliper guide pins and boots. Clean them. Replace, if necessary.
  9. Step 12
    Changing of Wheel Bearing on Mazda 3 BL 2009 won't be an issue if you follow this illustrated step-by-step guide
    Remove the brake pads.
  10. Step 13
    Clean the brake caliper bracket fasteners. Use a wire brush. Use WD-40 spray.
    Step 14
    MAZDA 3 2.0 DISI (BLEFW) Wheel Bearing replacement: online guides and video tutorials
    Unscrew the caliper bracket fastening. Use a drive socket #14. Use a ratchet wrench.
  11. Step 15
    Replacing Wheel Bearing on Mazda 3 BL 2011 1.6 MZR (BL14) by yourself
    Remove the fastening bolts (2 pieces).
  12. Step 16
    Remove the caliper bracket.
    Step 17
    3 (BL) 2.2 MZR CD (BL10) 2012 Wheel Bearing DIY replacement workshop manual
    Remove the brake disc.
  13. Step 18
    Clean the fasteners of the wheel hub bearing. Use a wire brush. Use WD-40 spray.
    Step 19.1
    How to change Wheel Bearing on MAZDA 3 (BL) 2013 - tips and tricks
    Unscrew the hub bearing mounting.
    Step 19.2
    Step-by-step recommendations for DIY replacement Mazda 3 BL 2014 2.2 MZR CD (BL10) Wheel Bearing
    Use Torx T50. Use a ratchet wrench.
  14. Step 20
    Remove the fastening bolts.
    Step 21
    Remove the hub bearing together with the brake disc protection plate. Use a rubber mallet.
    Step 22
    DIY replacement of Wheel Bearing on MAZDA 3 (BL) 1.6 MZR CD (BL14) 2008 is not an issue anymore with our step-by-step tutorial
    Detach the ABS sensor connector. Use a flat screwdriver.
  15. Step 23
    Remove the brake disc cover.
    Step 24
    How to change Wheel Bearing on Mazda 3 BL 2008 - free PDF and video manuals
    Unscrew the ABS sensor fastener. Use a drive socket #6. Use a ratchet wrench.
  16. Step 25
    How to replace MAZDA 3 (BL) 1.6 MZR (BL14) 2009 Wheel Bearing - step-by-step manuals and video guides
    Disconnect the ABS sensor.
  17. Step 26
    Mazda 3 BL 1.6 MZ-CD (BL14) 2010 Wheel Bearing replacement: free workshop manuals
    Connect the ABS sensor.
  18. Step 27
    Changing Wheel Bearing on MAZDA 3 (BL) 2.3 MPS Turbo (BL14) 2011 by yourself
    Screw in the ABS sensor fastener. Use a drive socket #6. Use a torque wrench. Tighten it to 5 nm torque.
  19. Step 28
    How to remove MAZDA 3 2.2 MZR CD (BL10) 2012 Wheel Bearing - online easy-to-follow instructions
    Clean the fasteners of the wheel hub bearing. Use a wire brush. Use WD-40 spray.
  20. Step 29
    Clean the hub bearing mounting seat. Use a wire brush. Use WD-40 spray.
    Step 30
    How to replace Wheel Bearing on MAZDA 3 (BL) 2013: download PDF manuals and video instructions
    Treat the fasteners of the wheel hub bearing. Use a sealant.
  21. Step 31
    How hard is it to do yourself: Wheel Bearing replacement on Mazda 3 BL 2.0 MZR (BLEFW) 2014 - download illustrated guide
    Install the brake disc cover.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the MAZDA 3 Hatchback (BL) model

Mazda 3 BL tyre size

Popular maintenance tutorials for Mazda 3 BL

More manuals for Mazda 3 BL

Complete guides for changing the Wheel bearings on different MAZDA 3 models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY MAZDA 3 (BL) Wheel Bearing replacement - online guide
Tips & tricks for your MAZDA 3 (BL)
View more
  • How to change Wheel bearings on MAZDA 3 (BL) 1.6 MZR CD (BL14) - replacement tricks
    Easy Steps to Fix Minor Scratches on Your Vehicle | AUTODOC tips
    8K views
    Published on: 12/05/2022
  • Changing Hub bearing Mazda 3 BL 1.6 MZR (BL14) - Replacement Tips
    5 more brake repair mistakes | Stop making these brake repair mistakes
    9K views
    Published on: 22/01/2025
  • Maintenance Hacks - MAZDA 3 (BL) 1.6 MZ-CD (BL14) Wheel bearing kit replacement guide
    Top 4 Car Cleaning Products to Protect Your Car's Body | AUTODOC Tips
    2K views
    Published on: 26/08/2021
  • Replace Wheel hub bearing on Mazda 3 BL - free video tips
    Revive Your Vehicle's Look | How to Restore Wheel Rims Yourself!
    7K views
    Published on: 13/05/2021

Most commonly replaced car parts on MAZDA 3

Professional manuals for the most common MAZDA models

ОЕ number
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
MAZDA 3 (BL) Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME