How to carry out replacement: Wheel Bearing 1.3 IMA (FA3, FD3) HONDA CIVIC VIII Saloon (FD, FA)
Disclaimer
Change HONDA CIVIC VIII Saloon (FD, FA) 1.3 (FD3) Wheel Bearing yourself – manuals and video tutorials

How to change rear wheel bearing on HONDA CIVIC VIII Saloon (FD, FA) – replacement guide

downloads: 7
Views: 209
Download your free tutorial and fix HONDA CIVIC VIII Saloon (FD, FA) 2.0 (FD2) problems yourself Download for free 1.78 MB Wheel Bearing for HONDA CIVIC VIII Saloon (FD, FA) Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
HONDA CIVIC VIII Saloon (FD, FA) 2.0 i-VTEC Type R (FD2) … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Wheel Bearing for CIVIC VIII Saloon (FD, FA) and other HONDA models
How to change Wheel bearing kit on HONDA CIVIC VIII Saloon (FD, FA) 1.3 IMA (FA3, FD3) – step-by-step instructions for straightforward car repair Wheel bearing kit
How to change Wheel bearing kit on Civic VIII Saloon (FD, FA) – tips for proper car maintenance
Wheel bearing kit for Civic VIII Saloon (FD, FA) Petrol (224 hp)
Tools
Replacement: wheel bearing – HONDA CIVIC VIII Saloon (FD, FA). Tools you'll need:
Wire brush
Nylon cleaning brush
WD-40 spray
Brake cleaner
All-purpose cleaning spray
High-temperature ceramic grease
Torque wrench
Drive socket # 12
Drive socket # 14
Drive socket # 30
Wheel impact socket #19
Ratchet wrench
Hammer
Flat chisel
Crow bar
Rubber mallet
Phillips screwdriver
Brake caliper wind back tool
Wheel chock
Buy tools
AUTODOC recommends:
  • Do not re-use the bearing assembly of your HONDA CIVIC VIII Saloon (FD, FA) car.
  • The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
  • Please note: all work on the car – HONDA CIVIC VIII Saloon (FD, FA) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    How to change Wheel Bearing on HONDA CIVIC VIII Saloon (FD, FA) 2005 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace HONDA CIVIC VIII Saloon (FD, FA) 1.3 IMA (FA3, FD3) 2006 Wheel Bearing - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  3. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    HONDA CIVIC VIII Saloon (FD, FA) 1.8 (FD1, FD7, FA1) 2007 Wheel Bearing replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. HONDA CIVIC VIII Saloon (FD, FA)
  4. Step 5
    Changing Wheel Bearing on HONDA CIVIC VIII Saloon (FD, FA) 1.6 2008 by yourself
    Remove the wheel.
  5. Step 6
    Clean the brake caliper fasteners. Use a wire brush. Use WD-40 spray.
    Step 7
    How to remove HONDA CIVIC 1.3 IMA (FA3) 2009 Wheel Bearing - online easy-to-follow instructions
    Unscrew the brake caliper fastening. Use a drive socket #12. Use a ratchet wrench.
  6. Step 8
    How to replace Wheel Bearing on HONDA CIVIC VIII Saloon (FD, FA) 2010: download PDF manuals and video instructions
    Remove the brake caliper. Use a crowbar.
    Replacement: wheel bearing – HONDA CIVIC VIII Saloon (FD, FA). Professionals recommend:
    Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur. Check the brake caliper bracket, brake caliper guide pins and boots. Clean them. Replace, if necessary.
  7. Step 9
    How hard is it to do yourself: Wheel Bearing replacement on HONDA CIVIC VIII Saloon (FD, FA) 2.0 i-VTEC Type R (FD2) 2011 - download illustrated guide
    Remove the brake pads. Use a crowbar.
  8. Step 10
    Clean the brake caliper bracket fasteners. Use a wire brush. Use WD-40 spray.
    Step 11
    Need to know how to renew Wheel Bearing on HONDA CIVIC 2012? This free workshop manual will help you to do it yourself
    Unscrew the caliper bracket fastening. Use a drive socket #14. Use a ratchet wrench.
  9. Step 12
    Remove the fastening bolts.
    Step 13
    Changing of Wheel Bearing on HONDA CIVIC VIII Saloon (FD, FA) 2013 won't be an issue if you follow this illustrated step-by-step guide
    Remove the caliper bracket.
  10. Step 14
    Clean the brake disc fasteners. Use a wire brush. Use WD-40 spray.
    Step 15
    HONDA CIVIC 1.3 (FD3) Wheel Bearing replacement: online guides and video tutorials
    Unscrew the brake disc fastening. Use a Phillips screwdriver.
  11. Step 16
    Replacing Wheel Bearing on HONDA CIVIC VIII Saloon (FD, FA) 2015 1.3 IMA (FA3, FD3) by yourself
    Remove the brake disc.
  12. Step 17
    CIVIC VIII Saloon (FD, FA) 1.3 IMA (FA3) 2016 Wheel Bearing DIY replacement workshop manual
    Remove the hub bearing protection cap. Use a crowbar. Use a rubber mallet.
  13. Step 18
    How to change Wheel Bearing on HONDA CIVIC VIII Saloon (FD, FA) 2017 - tips and tricks
    Unstake the wheel hub retaining nut. Use a flat metal-working chisel. Use a hammer.
  14. Step 19
    Step-by-step recommendations for DIY replacement HONDA CIVIC VIII Saloon (FD, FA) 2018 1.3 IMA (FA3) Wheel Bearing
    Unscrew the wheel hub axle nut. Use a drive socket #30. Use a ratchet wrench.
  15. Step 20
    DIY replacement of Wheel Bearing on HONDA CIVIC VIII Saloon (FD, FA) 1.3 IMA (FD3) 2019 is not an issue anymore with our step-by-step tutorial
    Remove the hub and the bearing together, since they are a sealed unit.
  16. Step 21
    Clean the wheel hub mounting seat. Use all-purpose cleaning spray.
    Step 22
    How to change Wheel Bearing on HONDA CIVIC VIII Saloon (FD, FA) 2005 - free PDF and video manuals
    Install the new wheel hub together with the bearing.
  17. Step 23
    Install the fastening nut.
    Step 24
    How to replace HONDA CIVIC VIII Saloon (FD, FA) 1.3 IMA (FA3, FD3) 2006 Wheel Bearing - step-by-step manuals and video guides
    Tighten the hub. Use a drive socket #30. Use a torque wrench. Tighten it to 162 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the HONDA Civic VIII Saloon (FD, FA) model.

HONDA CIVIC VIII Saloon (FD, FA) tyre size

Popular maintenance tutorials for HONDA CIVIC VIII Saloon (FD, FA)

More manuals for HONDA CIVIC VIII Saloon (FD, FA)

Complete guides for changing the Wheel bearings on different HONDA CIVIC models

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
HONDA CIVIC VIII Saloon (FD, FA) Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY HONDA CIVIC VIII Saloon (FD, FA) Wheel Bearing replacement - online guide
Tips & tricks for your HONDA CIVIC VIII Saloon (FD, FA)
View more
  • How to change Wheel bearings on HONDA CIVIC VIII Saloon (FD, FA) 1.3 IMA (FD3) - replacement tricks
    How do EGR valves work? | AUTODOC
    18K views
    Published on: 18/07/2020
  • Changing Hub bearing HONDA CIVIC VIII Saloon (FD, FA) 1.3 IMA (FA3, FD3) - Replacement Tips
    TOP 6 WD-40 lifehacks | AUTODOC tips
    12K views
    Published on: 15/07/2021
  • Maintenance Hacks - HONDA CIVIC VIII Saloon (FD, FA) 1.8 (FD1, FD7, FA1) Wheel bearing kit replacement guide
    Things you should never do with your manual transmission | AUTODOC tips
    5K views
    Published on: 20/10/2020
  • Replace Wheel hub bearing on HONDA CIVIC VIII Saloon (FD, FA) - free video tips
    5 common car washing mistakes | AUTODOC tips
    5K views
    Published on: 23/09/2021

Most commonly replaced car parts on HONDA CIVIC

Professional manuals for the most common HONDA models