Important!
This replacement procedure can be used for:
AUDI 80 Saloon (8C2, B4) 2.0 E 16V, AUDI 80 Saloon (8C2, B4) 2.0 E, AUDI 80 Saloon (8C2, B4) 2.0, AUDI 80 Saloon (8C2, B4) 1.6 E, AUDI 80 Saloon (8C2, B4) 1.6, AUDI 80 Saloon (8C2, B4) 1.9 TDI, AUDI 80 Saloon (8C2, B4) 1.9 TD View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Tools
Replacement: wheel bearing – AUDI 80 (8C, B4). Tools you might need:
Wire brush
All-purpose cleaning spray
Multipurpose grease
Copper grease
Torque wrench
Combination spanner #10
Drive socket # 24
Wheel impact socket #17
Bush and bearing driver set
3-Arm Gear Puller
Ratchet wrench
Hammer
Crow bar
Wheel chock
AUTODOC recommends:
  • Do not re-use the bearing assembly of your AUDI 80 (8C, B4) car.
  • The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
  • Please note: all work on the car – AUDI 80 (8C, B4) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    How to change Wheel Bearing on Audi 80 b4 1991 - free PDF and video manuals
    Engage the parking brake lever.
  2. Step 2
    How to replace AUDI 80 Saloon (8C2, B4) 2.0 1992 Wheel Bearing - step-by-step manuals and video guides
    Loosen the parking brake cable. Use a combination spanner #10.
  3. Step 3
    Secure the wheels with chocks.
    Step 4
    Audi 80 b4 2.0 E 1993 Wheel Bearing replacement: free workshop manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  4. Step 5
    Raise the rear of the car and secure on supports.
    Step 6
    Changing Wheel Bearing on AUDI 80 Saloon (8C2, B4) 2.3 E 1994 by yourself
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. AUDI 80 (8C, B4)
  5. Step 7
    How to remove AUDI 80 2.3 E quattro 1991 Wheel Bearing - online easy-to-follow instructions
    Remove the wheel.
  6. Step 8
    How to replace Wheel Bearing on AUDI 80 Saloon (8C2, B4) 1992: download PDF manuals and video instructions
    Clean the brake drum. Use a wire brush. Use all-purpose cleaning spray.
  7. Step 9
    How hard is it to do yourself: Wheel Bearing replacement on Audi 80 b4 1.9 TD 1993 - download illustrated guide
    Remove the wheel hub nut cap. Use a crowbar. Use a hammer.
  8. Step 10
    Need to know how to renew Wheel Bearing on AUDI 80 1994? This free workshop manual will help you to do it yourself
    Remove the cotter pin securing the hub nut. Use a crowbar. Use a hammer.
  9. Step 11
    Changing of Wheel Bearing on Audi 80 b4 1991 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the hub nut. Use a drive socket #24. Use a ratchet wrench.
  10. Step 12
    AUDI 80 2.0 E 16V quattro Wheel Bearing replacement: online guides and video tutorials
    Remove the brake drum assembled with the wheel hub bearing.
    Replacement: wheel bearing – AUDI 80 (8C, B4). Tip:
    Examine the brake drum. Replace it if necessary.
  11. Step 13
    Replacing Wheel Bearing on Audi 80 b4 1993 2.0 by yourself
    Clean the hub bearing mounting seat. Use all-purpose cleaning spray.
  12. Step 14
    80 Saloon (8C2, B4) 2.3 E quattro 1994 Wheel Bearing DIY replacement workshop manual
    Remove the hub bearing mounting. Use a crowbar.
  13. Step 15
    How to change Wheel Bearing on AUDI 80 Saloon (8C2, B4) 1991 - tips and tricks
    Remove the inner oil seal of the wheel bearing. Use a crowbar.
  14. Step 16
    Step-by-step recommendations for DIY replacement Audi 80 b4 1992 2.3 E quattro Wheel Bearing
    Remove the hub bearing mounting. Use a crowbar.
  15. Step 17
    DIY replacement of Wheel Bearing on AUDI 80 Saloon (8C2, B4) 1.9 TDI 1993 is not an issue anymore with our step-by-step tutorial
    Clean the hub bearing mounting seat.
  16. Step 18
    How to change Wheel Bearing on Audi 80 b4 1991 - free PDF and video manuals
    Remove the inner race of the wheel bearing from the brake drum. Use 3-Arm Gear Puller. Use a bush and bearing driver set.
  17. Step 19
    How to replace AUDI 80 Saloon (8C2, B4) 2.0 1992 Wheel Bearing - step-by-step manuals and video guides
    Remove the inner race of the wheel bearing from the brake drum. Use a bush and bearing driver set.
  18. Step 20
    Audi 80 b4 2.0 E 1993 Wheel Bearing replacement: free workshop manuals
    Install the new inner race of the wheel bearing into the brake drum. Use a bush and bearing driver set. Use a hammer.
  19. Step 21
    Changing Wheel Bearing on AUDI 80 Saloon (8C2, B4) 2.3 E 1994 by yourself
    Install the new inner race of the wheel bearing into the brake drum. Use a bush and bearing driver set. Use a hammer.
  20. Step 22
    How to remove AUDI 80 2.3 E quattro 1991 Wheel Bearing - online easy-to-follow instructions
    Treat the inner race and the wheel bearing. Use a multipurpose grease.
  21. Step 23
    How to replace Wheel Bearing on AUDI 80 Saloon (8C2, B4) 1992: download PDF manuals and video instructions
    Install a new hub bearing and secure it.
  22. Step 24
    How hard is it to do yourself: Wheel Bearing replacement on Audi 80 b4 1.9 TD 1993 - download illustrated guide
    Press in the inner oil seal of the wheel bearing. Use a bush and bearing driver set. Use a hammer.
  23. Step 25
    Need to know how to renew Wheel Bearing on AUDI 80 1994? This free workshop manual will help you to do it yourself
    Install a new hub bearing and secure it.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the AUDI 80 B4 Saloon (8C2) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
AUDI 80 Saloon (8C2, B4) Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
Autodoc CLUB App icon
DIY AUDI 80 Saloon (8C2, B4) Wheel Bearing replacement - online guide
Tips & tricks for your AUDI 80 Saloon (8C2, B4)
View more
  • How to change Wheel bearings on AUDI 80 Saloon (8C2, B4) 1.9 TDI - replacement tricks
    3 things to know before buying summer tyres | AUTODOC tips
  • Changing Hub bearing Audi 80 b4 2.0 - Replacement Tips
    How to unlock your car without a key | AUTODOC tips
  • Maintenance Hacks - AUDI 80 Saloon (8C2, B4) 2.0 E Wheel bearing kit replacement guide
    4 reasons why your CHECK ENGINE light is on | AUTODOC tips
  • Replace Wheel hub bearing on Audi 80 b4 - free video tips
    How to check your head gasket | AUTODOC

Professional manuals for the most common AUDI models