Disclaimer
How to change rear strut mount on VW POLO VIVO Hatchback – replacement guide
downloads:
6
Views:
134
Important!
This replacement procedure can be used for:
VW POLO VIVO Hatchback 1.4 … View more
The steps may slightly vary depending on the car design.
VW POLO VIVO Hatchback 1.4 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Strut Mount for POLO VIVO Hatchback and other VW models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #16
Drive socket # 16
Wheel impact socket #17
Ratchet wrench
Torque wrench
Crow bar
Hydraulic transmission jack
Wheel chock
Replacement: strut mount – VW POLO VIVO Hatchback. Tip from AUTODOC experts:
- The replacement procedure is identical for the mounts of the right and left shock absorbers of the rear suspension.
- Both mounts of the rear shock struts should be replaced simultaneously.
- Be sure to replace all self-locking nuts and bolts during installation.
- All work should be done with the engine stopped.
Replacement: strut mount – VW POLO VIVO Hatchback. Use the following procedure:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the rear of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. VW POLO VIVO Hatchback - Step 5
Remove the wheel. - Step 6
Support the rear suspension beam. Use a hydraulic transmission jack. - Step 7
Clean the shock absorber fasteners. Use a wire brush. Use WD-40 spray. - Step 8
Unscrew the lower fastener of the shock absorber. Use a combination spanner #16. Use a drive socket #16. Use a ratchet wrench. - Step 9Remove the fastening bolt.Step 10
Detach the lower part of the shock absorber. Use a crowbar. - Step 11
Unscrew the upper fastener of the shock absorber. Use a drive socket #16. Use a ratchet wrench.AUTODOC recommends:Important! Hold the shock absorber while unscrewing the fastening bolts. VW POLO VIVO Hatchback - Step 12
Remove the shock absorber. - Step 13Clean the shock absorber rod fastener. Use a wire brush. Use WD-40 spray.Step 14
Remove the shock absorber piston rod fastening. Use a drive socket #16. Use a ratchet wrench. - Step 15
Remove the top strut mount.Replacement: strut mount – VW POLO VIVO Hatchback. AUTODOC recommends:Examine the shock absorber dust cap and the bump stop. Replace them if necessary. - Step 16
Install a new strut mount. - Step 17
Screw the shock strut piston rod upper fastening. Use a drive socket #16. Use a torque wrench. Tighten it to 25 nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VW Polo Vivo Hatchback model
Popular maintenance tutorials for VW POLO VIVO Hatchback
Complete guides for changing the Strut mount on different VW POLO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VW POLO VIVO Hatchback
View more
2 ways to clean the EGR valve – which one is better?
5 mistakes made when washing the engine | AUTODOC tips
TOP 5 mistakes during DIY oil change | AUTODOC tips
Transform Your Car's Look: 6 Simple Accessories You Need to Try!
Most commonly replaced car parts on VW POLO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME




























