Important!
This replacement procedure can be used for:
AUDI A3 Hatchback (8V1, 8VK) 1.4 TFSI, AUDI A3 Hatchback (8V1, 8VK) 1.8 TFSI, AUDI A3 Hatchback (8V1, 8VK) 2.0 TDI, AUDI A3 Hatchback (8V1, 8VK) 2.0 TDI, AUDI A3 Hatchback (8V1, 8VK) 1.6 TDI, AUDI A3 Hatchback (8V1, 8VK) 2.0 TDI, AUDI A3 Hatchback (8V1, 8VK) 2.0 TDI, AUDI A3 Hatchback (8V1, 8VK) 1.4 TFSI, AUDI A3 Hatchback (8V1, 8VK) 1.2 TFSI, AUDI A3 Hatchback (8V1, 8VK) 2.0 TDI, AUDI A3 Hatchback (8V1, 8VK) 1.6 TDI, AUDI A3 Hatchback (8V1, 8VK) 1.2 TFSI, AUDI A3 Hatchback (8V1, 8VK) 1.4 TFSI, AUDI A3 Hatchback (8V1, 8VK) 1.4 TSI View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Strut Mount for A3 Hatchback (8V1, 8VK) and other AUDI models
Tools
Replacement: strut mount – AUDI A3 (8V1). Tools you might need:
Wire brush
WD-40 spray
Brake cleaner
Ceramic grease
Copper grease
Torque wrench
Combination spanner #18
Drive socket # 13
Drive socket # 16
Drive socket # 18
Shock absorber socket DD#5,2
Shock absorber socket DD#6
Torx bit T25
Wheel impact socket #17
Ratchet wrench
Vice
Crow bar
Hydraulic transmission jack
Wheel chock
Replacement: strut mount – AUDI A3 (8V1). Tip from AUTODOC experts:
  • The replacement procedure is identical for the mounts of the right and left shock absorbers of the rear suspension.
  • Both mounts of the rear shock struts should be replaced simultaneously.
  • Please note: all work on the car – AUDI A3 (8V1) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Strut Mount on AUDI A3 8v 2012 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  2. Step 3
    Raise the car.
    Replacement: strut mount – AUDI A3 (8V1). Tip from AUTODOC experts:
    If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.
    Step 4
    How to replace AUDI A3 Hatchback (8V1, 8VK) 2.0 TDI 2013 Strut Mount - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. AUDI A3 (8V1)
  3. Step 5
    AUDI A3 8v 1.6 TDI 2014 Strut Mount replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing Strut Mount on AUDI A3 Hatchback (8V1, 8VK) S3 2.0 quattro 2015 by yourself
    Clean the lower shock absorber fastener. Use a wire brush. Use WD-40 spray.
  5. Step 7
    How to remove AUDI A3 1.8 TFSI 2016 Strut Mount - online easy-to-follow instructions
    Support the rear knuckle. Use a hydraulic transmission jack.
  6. Step 8
    How to replace Strut Mount on AUDI A3 Hatchback (8V1, 8VK) 2017: download PDF manuals and video instructions
    Unscrew the lower fastener of the shock absorber. Use a combination spanner #18. Use a drive socket #18. Use a ratchet wrench.
  7. Step 9
    How hard is it to do yourself: Strut Mount replacement on AUDI A3 8v 1.8 TFSI quattro 2018 - download illustrated guide
    Clean the locker fasteners. Use a wire brush.
  8. Step 10
    Need to know how to renew Strut Mount on AUDI A3 2019? This free workshop manual will help you to do it yourself
    Unscrew the locker fasteners. Use Torx T25. Use a ratchet wrench.
  9. Step 11
    Changing of Strut Mount on AUDI A3 8v 2020 won't be an issue if you follow this illustrated step-by-step guide
    Move the locker aside to gain access to the upper shock absorber fasteners.
  10. Step 12
    AUDI A3 2.0 TDI Strut Mount replacement: online guides and video tutorials
    Clean the charcoal canister fastener. Use a wire brush. Use WD-40 spray.
  11. Step 13
    Replacing Strut Mount on AUDI A3 8v 2013 2.0 TDI by yourself
    Unscrew the charcoal canister fastener. Use a drive socket #13. Use a ratchet wrench.
  12. Step 14
    A3 Hatchback (8V1, 8VK) 1.8 TFSI 2014 Strut Mount DIY replacement workshop manual
    Move the charcoal canister aside to gain access to the upper shock absorber fasteners.
  13. Step 15
    How to change Strut Mount on AUDI A3 Hatchback (8V1, 8VK) 2015 - tips and tricks
    Clean the fasteners of the shock absorber upper mount. Use a wire brush. Use WD-40 spray.
  14. Step 16
    Step-by-step recommendations for DIY replacement AUDI A3 8v 2016 1.8 TFSI Strut Mount
    Unscrew the shock absorber mount fasteners. Use a drive socket #16. Use a ratchet wrench.
  15. Step 17
    DIY replacement of Strut Mount on AUDI A3 Hatchback (8V1, 8VK) 1.4 TFSI 2017 is not an issue anymore with our step-by-step tutorial
    Remove the fastening bolts.
  16. Step 18
    How to change Strut Mount on AUDI A3 8v 2012 - free PDF and video manuals
    Lower the hydraulic transmission jack by 10-15 cm.
  17. Step 19
    How to replace AUDI A3 Hatchback (8V1, 8VK) 2.0 TDI 2013 Strut Mount - step-by-step manuals and video guides
    Remove the fastening bolt.
  18. Step 20
    AUDI A3 8v 1.6 TDI 2014 Strut Mount replacement: free workshop manuals
    Remove the shock absorber.
  19. Step 21
    Changing Strut Mount on AUDI A3 Hatchback (8V1, 8VK) S3 2.0 quattro 2015 by yourself
    Clean the shock absorber mounting seats. Use a wire brush. Use WD-40 spray.
  20. Step 22
    How to remove AUDI A3 1.8 TFSI 2016 Strut Mount - online easy-to-follow instructions
    Grip the shock absorber in a vice.
  21. Step 23
    How to replace Strut Mount on AUDI A3 Hatchback (8V1, 8VK) 2017: download PDF manuals and video instructions
    Remove the shock absorber mount cap. Use a crowbar.
  22. Step 24
    How hard is it to do yourself: Strut Mount replacement on AUDI A3 8v 1.8 TFSI quattro 2018 - download illustrated guide
    Clean the shock absorber rod fastener. Use a wire brush. Use WD-40 spray.
  23. Step 25
    Need to know how to renew Strut Mount on AUDI A3 2019? This free workshop manual will help you to do it yourself
    Remove the fastener of the shock absorber piston rod. Use a drive socket #16. Use a shock absorber socket DD№5,2. Use a ratchet wrench.
  24. Step 26
    Changing of Strut Mount on AUDI A3 8v 2020 won't be an issue if you follow this illustrated step-by-step guide
    Remove the shock absorber mount, boot and bump stop.
    AUTODOC recommends:
    Replacement: strut mount – AUDI A3 (8V1). Carefully inspect the mount, the boot, and the bump stop of the shock absorber. Replace if necessary.
  25. Step 27
    AUDI A3 2.0 TDI Strut Mount replacement: online guides and video tutorials
    Install the new mount, boot, and bump stop on the shock absorber.
  26. Step 28
    Replacing Strut Mount on AUDI A3 8v 2013 2.0 TDI by yourself
    Tighten the shock absorber rod nut. Use a drive socket #16. Use a shock absorber socket DD№6. Use a torque wrench. Tighten it to 25 Nm torque.
  27. Step 29
    A3 Hatchback (8V1, 8VK) 1.8 TFSI 2014 Strut Mount DIY replacement workshop manual
    Treat the shock absorber rod fastener. Use copper grease.
  28. Step 30
    How to change Strut Mount on AUDI A3 Hatchback (8V1, 8VK) 2015 - tips and tricks
    Install the shock absorber mount cap.
  29. Step 31
    Step-by-step recommendations for DIY replacement AUDI A3 8v 2016 1.8 TFSI Strut Mount
    Release the vice and take out the shock absorber.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the AUDI A3 Hatchback (8V1, 8VK) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
AUDI A3 Hatchback (8V1, 8VK) Strut Mount replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY AUDI A3 Hatchback (8V1, 8VK) Strut Mount replacement - online guide
Tips & tricks for your AUDI A3 Hatchback (8V1, 8VK)
View more
  • How to change Strut mount on AUDI A3 Hatchback (8V1, 8VK) 1.4 TFSI - replacement tricks
    DIY brake caliper restoration | AUTODOC tips
  • Changing Top mount AUDI A3 8v 2.0 TDI - Replacement Tips
    Coolant comparison test | AUTODOC
  • Maintenance Hacks - AUDI A3 Hatchback (8V1, 8VK) 1.6 TDI Top strut mount replacement guide
    What to do if your check engine light is on | AUTODOC tips
  • Replace Top mounts on AUDI A3 8v - free video tips
    How do EGR valves work? | AUTODOC

Professional manuals for the most common AUDI models