How to carry out replacement: Anti Roll Bar Links 2.0 TDI AUDI A3 8v
Disclaimer
Change AUDI A3 8v 2.0 TDI Anti Roll Bar Links yourself – manuals and video tutorials

How to change rear anti roll bar links on AUDI A3 Hatchback (8V1, 8VK) – replacement guide

downloads: 1
Views: 12
Download your free tutorial and fix AUDI A3 Hatchback (8V1, 8VK) 1.2 TFSI problems yourself Download for free 1.2 MB Anti Roll Bar Links for AUDI A3 8v Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
AUDI A3 Hatchback (8V1, 8VK) 1.4 TFSI, AUDI A3 Hatchback (8V1, 8VK) 1.8 TFSI, AUDI A3 Hatchback (8V1, 8VK) 2.0 TDI, AUDI A3 Hatchback (8V1, 8VK) 2.0 TDI, AUDI A3 Hatchback (8V1, 8VK) 1.8 TFSI quattro, AUDI A3 Hatchback (8V1, 8VK) 1.6 TDI, AUDI A3 Hatchback (8V1, 8VK) 2.0 TDI, AUDI A3 Hatchback (8V1, 8VK) 2.0 TDI quattro, AUDI A3 Hatchback (8V1, 8VK) 2.0 TDI quattro, AUDI A3 Hatchback (8V1, 8VK) 1.4 TFSI, AUDI A3 Hatchback (8V1, 8VK) 1.2 TFSI, AUDI A3 Hatchback (8V1, 8VK) S3 quattro, AUDI A3 Hatchback (8V1, 8VK) S3 quattro … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for A3 Hatchback (8V1, 8VK) and other AUDI models
Alternative products
How to change Anti-roll bar link on AUDI A3 8v 2.0 TDI – step-by-step instructions for straightforward car repair Anti-roll bar link
Tools
Replacement: anti roll bar links – AUDI A3 (8V1). Tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #14
XZN socket bit # 6
Drive socket # 14
Drive socket # 15
Wheel impact socket #17
Ratchet wrench
Torque wrench
Buy tools
AUTODOC recommends:
  • Replace the stabiliser links on AUDI A3 (8V1) in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • All work should be done with the engine stopped.
Replacement: anti roll bar links – AUDI A3 (8V1). Use the following procedure:
  1. Step 1
    How to change Anti Roll Bar Links on AUDI A3 8v 2012 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace AUDI A3 Hatchback (8V1, 8VK) 2.0 TDI 2013 Anti Roll Bar Links - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    AUDI A3 8v 1.6 TDI 2014 Anti Roll Bar Links replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. AUDI A3 (8V1)
  4. Step 5
    Changing Anti Roll Bar Links on AUDI A3 Hatchback (8V1, 8VK) S3 2.0 quattro 2015 by yourself
    Remove the wheel.
  5. Step 6
    How to remove AUDI A3 1.8 TFSI 2016 Anti Roll Bar Links - online easy-to-follow instructions
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Anti Roll Bar Links on AUDI A3 Hatchback (8V1, 8VK) 2017: download PDF manuals and video instructions
    Unscrew the fasteners connecting the stabiliser link to the stabiliser bar. Use a combination spanner #14. Use a drive socket #14. Use XZN #6. Use a ratchet wrench.
  7. Step 8
    How hard is it to do yourself: Anti Roll Bar Links replacement on AUDI A3 8v 1.8 TFSI quattro 2018 - download illustrated guide
    Unscrew the fastener connecting the stabilizer link to the control arm. Use a drive socket #15. Use a ratchet wrench.
  8. Step 9
    Need to know how to renew Anti Roll Bar Links on AUDI A3 2019? This free workshop manual will help you to do it yourself
    Remove the stabilizer rod.
    Replacement: anti roll bar links – AUDI A3 (8V1). Tip from AUTODOC:
    Examine stabiliser bushes. Replace them if needed.
  9. Step 10
    Changing of Anti Roll Bar Links on AUDI A3 8v 2020 won't be an issue if you follow this illustrated step-by-step guide
    Install a new rod, tighten the fasteners.
  10. Step 11
    AUDI A3 2.0 TDI Anti Roll Bar Links replacement: online guides and video tutorials
    Tighten the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #14. Use XZN #6. Use a drive socket #15. Use a torque wrench. Tighten it to 45 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the AUDI A3 Hatchback (8V1, 8VK) model

AUDI A3 8v tyre size

Popular maintenance tutorials for AUDI A3 8v

More manuals for AUDI A3 8v

Complete guides for changing the Drop links on different AUDI A3 models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY AUDI A3 Hatchback (8V1, 8VK) Anti Roll Bar Links replacement - online guide
Tips & tricks for your AUDI A3 Hatchback (8V1, 8VK)
View more
  • How to change Drop links on AUDI A3 Hatchback (8V1, 8VK) 1.4 TFSI - replacement tricks
    DIY alternator repair | AUTODOC tips
    2M views
    Published on: 30/11/2022
  • Changing Stabilizer link AUDI A3 8v 2.0 TDI - Replacement Tips
    How I started restoring a driveshaft | Drivetrain restoration – Part 1
    7K views
    Published on: 17/10/2024
  • Maintenance Hacks - AUDI A3 Hatchback (8V1, 8VK) 1.6 TDI Sway bar link replacement guide
    How to repair a bumper yourself | AUTODOC tips
    16K views
    Published on: 01/06/2023
  • Replace Drop link on AUDI A3 8v - free video tips
    How to Fix a Squealing Belt: Causes & Solutions | AUTODOC Expert Tips
    5K views
    Published on: 04/03/2021

Most commonly replaced car parts on AUDI A3

Professional manuals for the most common AUDI models

Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
AUDI A3 Hatchback (8V1, 8VK) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME