Disclaimer
How to change rear shock absorbers on RENAULT Clio III Grandtour – replacement guide
downloads:
0
Views:
15
Important!
This replacement procedure can be used for:
RENAULT CLIO Grandtour (KR0/1_) 1.2 16V, RENAULT CLIO Grandtour (KR0/1_) 1.2 16V (KR02, KR0J), RENAULT CLIO Grandtour (KR0/1_) 1.2 16V (KR0E), RENAULT CLIO Grandtour (KR0/1_) 1.2 16V (KR0P), RENAULT CLIO Grandtour (KR0/1_) 1.6 16V (KR0B), RENAULT CLIO Grandtour (KR0/1_) 1.5 dCi (KR0G), RENAULT CLIO Grandtour (KR0/1_) 1.5 dCi (KR0F), RENAULT CLIO Grandtour (KR0/1_) 1.5 dCi (KR1C, KR1N), RENAULT CLIO Grandtour (KR0/1_) 1.5 dCi (KR0H, KR1S), RENAULT CLIO Grandtour (KR0/1_) 1.2 16V Hi-Flex (KR0S), RENAULT CLIO Grandtour (KR0/1_) 1.6 16V (KR10), RENAULT CLIO Grandtour (KR0/1_) 1.5 dCi, RENAULT CLIO Grandtour (KR0/1_) 1.5 dCi, RENAULT CLIO Grandtour (KR0/1_) 1.4 16V, RENAULT CLIO Grandtour (KR0/1_) 1.5 dCi … View more
The steps may slightly vary depending on the car design.
RENAULT CLIO Grandtour (KR0/1_) 1.2 16V, RENAULT CLIO Grandtour (KR0/1_) 1.2 16V (KR02, KR0J), RENAULT CLIO Grandtour (KR0/1_) 1.2 16V (KR0E), RENAULT CLIO Grandtour (KR0/1_) 1.2 16V (KR0P), RENAULT CLIO Grandtour (KR0/1_) 1.6 16V (KR0B), RENAULT CLIO Grandtour (KR0/1_) 1.5 dCi (KR0G), RENAULT CLIO Grandtour (KR0/1_) 1.5 dCi (KR0F), RENAULT CLIO Grandtour (KR0/1_) 1.5 dCi (KR1C, KR1N), RENAULT CLIO Grandtour (KR0/1_) 1.5 dCi (KR0H, KR1S), RENAULT CLIO Grandtour (KR0/1_) 1.2 16V Hi-Flex (KR0S), RENAULT CLIO Grandtour (KR0/1_) 1.6 16V (KR10), RENAULT CLIO Grandtour (KR0/1_) 1.5 dCi, RENAULT CLIO Grandtour (KR0/1_) 1.5 dCi, RENAULT CLIO Grandtour (KR0/1_) 1.4 16V, RENAULT CLIO Grandtour (KR0/1_) 1.5 dCi … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Shock Absorber for CLIO Grandtour (KR0/1_) and other RENAULT models
Alternative products

Wire brush
WD-40 spray
Copper grease
Torque wrench
Combination spanner #13
Drive socket # 16
Drive socket # 18
Wheel impact socket #17
Shock absorber socket #DD6
Ratchet wrench
Crow bar
Hydraulic transmission jack
Wheel chock
Replacement: shock absorbers – RENAULT CLIO Grandtour (KR0/1_). Tip from AUTODOC experts:
- Both shock absorbers of the rear suspension should be replaced simultaneously.
- The replacement procedure is identical for the left and right shock absorbers of the rear suspension.
- All work should be done with the engine stopped.
Replacement: shock absorbers – RENAULT CLIO Grandtour (KR0/1_). Recommended sequence of steps:
- Step 1Secure the wheels with chocks.Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Open the boot lid.Step 4
Detach the boot side lining. - Step 5
Clean the shock absorber fasteners. Use a wire brush. Use WD-40 spray. - Step 6
Unscrew the upper fastener of the shock absorber. Use a shock absorber socket DD№6 Use a drive socket #16. Use a ratchet wrench. - Step 7Raise the rear of the car and secure on supports.Step 8
Unscrew the wheel bolts.Replacement: shock absorbers – RENAULT CLIO Grandtour (KR0/1_). Professionals recommend:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 9
Remove the wheel. - Step 10
Disconnect the ABS sensor wiring. Use a crowbar. - Step 11
Clean the shock absorber fasteners. Use a wire brush. Use WD-40 spray. - Step 12
Support the rear suspension beam. Use a hydraulic transmission jack. - Step 13
Unscrew the lower fastener of the shock absorber. Use a drive socket #18. Use a ratchet wrench.Replacement: shock absorbers – RENAULT CLIO Grandtour (KR0/1_). Tip:To avoid injuries, hold the shock absorber when undoing the fastening bolts. - Step 14
Remove the shock absorber.Replacement: shock absorbers – RENAULT CLIO Grandtour (KR0/1_). AUTODOC experts recommend:Before installing a new shock absorber you should pump it manually 3-5 times. - Step 15
Clean the shock absorber mounting seats. Use a wire brush. Use WD-40 spray. - Step 16
Place the shock absorber in the wheel arch and secure it.AUTODOC recommends:Important! Hold the shock absorber while screwing in the fastening bolts. RENAULT CLIO Grandtour (KR0/1_) - Step 17
Screw in the lower fastener of the shock absorber. Use a drive socket #18. Use a ratchet wrench. - Step 18
Raise the hydraulic transmission jack by 10-15 cm. - Step 19
Tighten the lower fastener of the shock absorber. Use a drive socket #18. Use a torque wrench. Tighten it to 105 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Clio III Grandtour model
Popular maintenance tutorials for Renault Clio 3 Grandtour
Complete guides for changing the Shock absorbers on different RENAULT CLIO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT CLIO Grandtour (KR0/1_)
View more
5 mistakes when replacing consumables
Top 7 Manual Transmission Mistakes to Avoid | AUTODOC Tips
DIY vehicle AC compressor restoration
Discover the 4 Key Reasons Your CHECK ENGINE Light Could Be On | AUTODOC Tips
Most commonly replaced car parts on RENAULT CLIO
ОЕ number
Time to replace parts? Get even better deals in our Shop app.

SCAN ME




























