Important!
This replacement procedure can be used for:
RENAULT CLIO II Box (SB0/1/2_) 1.9 D (SB0E), RENAULT CLIO II Box (SB0/1/2_) 1.5 dCi (SB07) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Shock Absorber for CLIO II Box (SB0/1/2_) and other RENAULT models
Tools
Replacement: suspension strut – RENAULT CLIO II Box (SB0/1/2_). Tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #18
Combination spanner #21
Drive socket # 10
Drive socket # 17
Drive socket # 18
Drive socket # 21
HEX bit no.H6.
Wheel impact socket #19
Ratchet wrench
Torque wrench
Hydraulic strut spring compressor
Tap wrench
Fender cover
Wheel chock
Replacement: suspension strut – RENAULT CLIO II Box (SB0/1/2_). Professionals recommend:
  • Both shock struts of the front suspension should be replaced simultaneously.
  • The replacement procedure is identical for the left and right shock struts of the front suspension.
  • Warning! Shut down the engine before starting any work – RENAULT CLIO II Box (SB0/1/2_).
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Shock Absorber on Renault Clio 2 Van 1998 - free PDF and video manuals
    Clean the fasteners of the shock strut upper mount. Use a wire brush. Use WD-40 spray.
  2. Step 4
    How to replace RENAULT CLIO II Box (SB0/1/2_) 1.5 dCi 1999 Shock Absorber - step-by-step manuals and video guides
    Loosen the upper fastener of the shock strut mount. Use HEX No.H6. Use a combination spanner #21. Use a ratchet wrench.
  3. Step 5
    Renault Clio 2 Van 1.9 D 2000 Shock Absorber replacement: free workshop manuals
    Secure the wheels with chocks.
  4. Step 6
    Changing Shock Absorber on RENAULT CLIO II Box (SB0/1/2_) 1.2 (SB0A, SB0F, SB1K, SB2D) 2001 by yourself
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  5. Step 7
    Raise the front of the car and secure on supports.
    Step 8
    How to remove RENAULT CLIO 1.9 DTi 2002 Shock Absorber - online easy-to-follow instructions
    Unscrew the wheel bolts.
    Replacement: suspension strut – RENAULT CLIO II Box (SB0/1/2_). AUTODOC recommends:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  6. Step 9
    How to replace Shock Absorber on RENAULT CLIO II Box (SB0/1/2_) 2003: download PDF manuals and video instructions
    Remove the wheel.
  7. Step 10
    How hard is it to do yourself: Shock Absorber replacement on Renault Clio 2 Van 1.9 D 2004 - download illustrated guide
    Clean the fasteners connecting the shock strut to the steering knuckle. Use a wire brush. Use WD-40 spray.
  8. Step 11
    Need to know how to renew Shock Absorber on RENAULT CLIO 2005? This free workshop manual will help you to do it yourself
    Unscrew the lower fastener connecting the shock strut to the steering knuckle. Use a combination spanner #18. Use a drive socket #18. Use a tap wrench.
  9. Step 12
    Changing of Shock Absorber on Renault Clio 2 Van 2006 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the ABS cable holder. Use a drive socket #10. Use a ratchet wrench.
  10. Step 13
    RENAULT CLIO 1.2 (SB0A, SB0F, SB1K, SB2D) Shock Absorber replacement: online guides and video tutorials
    Remove the fastening bolts.
  11. Step 14
    Replacing Shock Absorber on Renault Clio 2 Van 2008 1.5 dCi by yourself
    Disconnect the steering knuckle from the shock absorber strut.
  12. Step 15
    CLIO II Box (SB0/1/2_) 1.9 DTi 2009 Shock Absorber DIY replacement workshop manual
    Unscrew the top fastening of the shock strut mount. Use a drive socket #21.
    AUTODOC recommends:
    RENAULT CLIO II Box (SB0/1/2_) – To avoid injury, hold the suspension strut while unscrewing the fastening bolts.
  13. Step 16
    How to change Shock Absorber on RENAULT CLIO II Box (SB0/1/2_) 2010 - tips and tricks
    Remove the suspension strut.
  14. Step 17
    Step-by-step recommendations for DIY replacement Renault Clio 2 Van 2011 1.9 DTi Shock Absorber
    Set the shock absorber strut on the spring compressor tool.
    Replacement: suspension strut – RENAULT CLIO II Box (SB0/1/2_). AUTODOC experts recommend:
    Note that when using a spring compressor, spring coils need to be securely gripped, compressing the spring on the opposite sides.Ensure the correct position of the spring in the retainer.Make sure that the spring coils tightly entered the lock handles.
  15. Step 18
    DIY replacement of Shock Absorber on RENAULT CLIO II Box (SB0/1/2_) 1.2 2012 is not an issue anymore with our step-by-step tutorial
    Compress the spring.
  16. Step 19
    Treat the shock strut rod. Use WD-40 spray.
    Step 20
    How to change Shock Absorber on Renault Clio 2 Van 1998 - free PDF and video manuals
    Remove the strut piston rod nut. Use a drive socket #17. Use HEX No.H6. Use a ratchet wrench.
  17. Step 21
    How to replace RENAULT CLIO II Box (SB0/1/2_) 1.5 dCi 1999 Shock Absorber - step-by-step manuals and video guides
    Remove the top strut mount.
  18. Step 22
    Renault Clio 2 Van 1.9 D 2000 Shock Absorber replacement: free workshop manuals
    Remove the shock absorber dust cap and the bump stop.
    AUTODOC recommends:
    Replacement: suspension strut – RENAULT CLIO II Box (SB0/1/2_). Carefully inspect the mount, the boot, and the bump stop of the shock absorber. Replace if necessary.
  19. Step 23
    Changing Shock Absorber on RENAULT CLIO II Box (SB0/1/2_) 1.2 (SB0A, SB0F, SB1K, SB2D) 2001 by yourself
    Release the coil spring.
  20. Step 24
    How to remove RENAULT CLIO 1.9 DTi 2002 Shock Absorber - online easy-to-follow instructions
    Remove the spring.
  21. Step 25
    How to replace Shock Absorber on RENAULT CLIO II Box (SB0/1/2_) 2003: download PDF manuals and video instructions
    Remove the old shock absorber from the hydraulic coil spring compressor.
    Replacement: suspension strut – RENAULT CLIO II Box (SB0/1/2_). Tip from AUTODOC experts:
    Before installing a new shock absorber you should pump it manually 3-5 times.
  22. Step 26
    How hard is it to do yourself: Shock Absorber replacement on Renault Clio 2 Van 1.9 D 2004 - download illustrated guide
    Install the new shock absorber on the hydraulic coil spring compressor.
  23. Step 27
    Need to know how to renew Shock Absorber on RENAULT CLIO 2005? This free workshop manual will help you to do it yourself
    Install the dust sleeve and the bump stop on the new shock absorber.
  24. Step 28
    Changing of Shock Absorber on Renault Clio 2 Van 2006 won't be an issue if you follow this illustrated step-by-step guide
    Install the spring on the shock absorber.
  25. Step 29
    RENAULT CLIO 1.2 (SB0A, SB0F, SB1K, SB2D) Shock Absorber replacement: online guides and video tutorials
    Compress the spring.
  26. Step 30
    Replacing Shock Absorber on Renault Clio 2 Van 2008 1.5 dCi by yourself
    Install the upper strut mount and the strut mount bearing.
  27. Step 31
    CLIO II Box (SB0/1/2_) 1.9 DTi 2009 Shock Absorber DIY replacement workshop manual
    Tighten the shock strut piston rod nut. Use a drive socket #17. Use HEX No.H6. Use a torque wrench. Tighten it to 21 Nm torque.
    Replacement: suspension strut – RENAULT CLIO II Box (SB0/1/2_). Tip:
    Check to make sure the spring is positioned correctly. Avoid its misalignment.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the RENAULT Clio II Van model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
RENAULT CLIO II Box (SB0/1/2_) Shock Absorber replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY RENAULT CLIO II Box (SB0/1/2_) Shock Absorber replacement - online guide
Tips & tricks for your RENAULT CLIO II Box (SB0/1/2_)
View more
  • How to change Shocks on RENAULT CLIO II Box (SB0/1/2_) 1.2 - replacement tricks
    How to paint a brake caliper | AUTODOC tips
  • Changing Shock absorbers Renault Clio 2 Van 1.5 dCi - Replacement Tips
    5 Tips for New Drivers | AUTODOC tips
  • Maintenance Hacks - RENAULT CLIO II Box (SB0/1/2_) 1.9 D Struts replacement guide
    What to do if the TPMS light is on | AUTODOC tips
  • Replace Struts and shocks on Renault Clio 2 Van - free video tips
    Top 6 products for enhancing your car | AUTODOC tips