Important!
This replacement procedure can be used for:
PEUGEOT 308 SW I Box Body / Estate (4E_) 1.6 HDi, PEUGEOT 308 SW I Box Body / Estate (4E_) 1.6 HDi, PEUGEOT 308 SW I Box Body / Estate (4E_) 2.0 HDi View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Shock Absorber for 308 SW I Box Body / Estate (4E_) and other PEUGEOT models
Tools
Replacement: shock absorbers – PEUGEOT 308 SW I Kasten / Kombi (4E_). List of the tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Combination spanner #13
Drive socket # 13
Drive socket # 15
Drive socket # 16
Wheel impact socket #17
Ratchet wrench
Shock absorber socket #DD6
Vice
Hydraulic transmission jack
Wheel chock
Replacement: shock absorbers – PEUGEOT 308 SW I Kasten / Kombi (4E_). Tip from AUTODOC experts:
  • Both shock absorbers of the rear suspension should be replaced simultaneously.
  • The replacement procedure is identical for the left and right shock absorbers of the rear suspension.
  • Please note: all work on the car – PEUGEOT 308 SW I Kasten / Kombi (4E_) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    How to change Shock Absorber on PEUGEOT 308 SW I Kasten / Kombi (4E_) 2008 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace PEUGEOT 308 SW I Box Body / Estate (4E_) 1.6 HDi 2009 Shock Absorber - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    PEUGEOT 308 SW I Kasten / Kombi (4E_) 2.0 HDi 2010 Shock Absorber replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: shock absorbers – PEUGEOT 308 SW I Kasten / Kombi (4E_). AUTODOC recommends:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Shock Absorber on PEUGEOT 308 SW I Box Body / Estate (4E_) 2.0 HDi 2011 by yourself
    Remove the wheel.
  5. Step 6
    How to remove PEUGEOT 308 1.6 HDi 2012 Shock Absorber - online easy-to-follow instructions
    Clean the shock absorber fasteners. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Shock Absorber on PEUGEOT 308 SW I Box Body / Estate (4E_) 2008: download PDF manuals and video instructions
    Support the rear suspension beam. Use a hydraulic transmission jack.
  7. Step 8
    How hard is it to do yourself: Shock Absorber replacement on PEUGEOT 308 SW I Kasten / Kombi (4E_) 1.6 HDi 2009 - download illustrated guide
    Unscrew the lower fastener of the shock absorber. Use a combination spanner #13. Use a drive socket #15. Use a ratchet wrench.
  8. Step 9
    Need to know how to renew Shock Absorber on PEUGEOT 308 2010? This free workshop manual will help you to do it yourself
    Unscrew the upper fastener of the shock absorber. Use a drive socket #13. Use a ratchet wrench.
    AUTODOC recommends:
    Important! Hold the shock absorber while unscrewing the fastening bolts. PEUGEOT 308 SW I Kasten / Kombi (4E_)
  9. Step 10
    Changing of Shock Absorber on PEUGEOT 308 SW I Kasten / Kombi (4E_) 2011 won't be an issue if you follow this illustrated step-by-step guide
    Remove the fastening bolts.
  10. Step 11
    PEUGEOT 308 1.6 HDi Shock Absorber replacement: online guides and video tutorials
    Remove the shock absorber.
  11. Step 12
    Replacing Shock Absorber on PEUGEOT 308 SW I Kasten / Kombi (4E_) 2008 1.6 HDi by yourself
    Grip the shock absorber in a vice.
  12. Step 13
    308 SW I Box Body / Estate (4E_) 1.6 HDi 2009 Shock Absorber DIY replacement workshop manual
    Clean the shock absorber rod fastener. Use a wire brush. Use WD-40 spray.
  13. Step 14
    How to change Shock Absorber on PEUGEOT 308 SW I Box Body / Estate (4E_) 2010 - tips and tricks
    Remove the shock absorber piston rod fastening. Use a shock absorber socket DD№6. Use a drive socket #16. Use a ratchet wrench.
  14. Step 15
    Step-by-step recommendations for DIY replacement PEUGEOT 308 SW I Kasten / Kombi (4E_) 2011 1.6 HDi Shock Absorber
    Remove the shock absorber mount, boot and bump stop.
    AUTODOC recommends:
    Replacement: shock absorbers – PEUGEOT 308 SW I Kasten / Kombi (4E_). Carefully inspect the mount, the boot, and the bump stop of the shock absorber. Replace if necessary.Before installing a new shock absorber you should pump it manually 3-5 times.
  15. Step 16
    DIY replacement of Shock Absorber on PEUGEOT 308 SW I Box Body / Estate (4E_) 1.6 HDi 2012 is not an issue anymore with our step-by-step tutorial
    Install the mount, boot and bump stop onto a new shock absorber.
  16. Step 17
    How to change Shock Absorber on PEUGEOT 308 SW I Kasten / Kombi (4E_) 2008 - free PDF and video manuals
    Tighten the shock absorber rod nut. Use a shock absorber socket DD№6. Use a drive socket #16. Use a torque wrench. Tighten it to 38 nm torque.
  17. Step 18
    How to replace PEUGEOT 308 SW I Box Body / Estate (4E_) 1.6 HDi 2009 Shock Absorber - step-by-step manuals and video guides
    Treat the shock absorber rod fastener. Use copper grease.
  18. Step 19
    PEUGEOT 308 SW I Kasten / Kombi (4E_) 2.0 HDi 2010 Shock Absorber replacement: free workshop manuals
    Release the vice and take out the shock absorber.
  19. Step 20
    Changing Shock Absorber on PEUGEOT 308 SW I Box Body / Estate (4E_) 2.0 HDi 2011 by yourself
    Clean the shock absorber mounting seats. Use a wire brush. Use WD-40 spray.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the PEUGEOT 308 SW I Box Body / Estate (4E_) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
PEUGEOT 308 SW I Box Body / Estate (4E_) Shock Absorber replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY PEUGEOT 308 SW I Box Body / Estate (4E_) Shock Absorber replacement - online guide
Tips & tricks for your PEUGEOT 308 SW I Box Body / Estate (4E_)
View more
  • How to change Shocks on PEUGEOT 308 SW I Box Body / Estate (4E_) 1.6 HDi - replacement tricks
    How to replace the suspension on a BMW E30 Turbo | SUPERCAR AUTODOC
  • Changing Shock absorbers PEUGEOT 308 SW I Kasten / Kombi (4E_) 1.6 HDi - Replacement Tips
    How to easily repair a punctured tyre | AUTODOC tips
  • Maintenance Hacks - PEUGEOT 308 SW I Box Body / Estate (4E_) 2.0 HDi Struts replacement guide
    How to clean an engine bay | AUTODOC
  • Replace Struts and shocks on PEUGEOT 308 SW I Kasten / Kombi (4E_) - free video tips
    Top 6 products for enhancing your car | AUTODOC tips